NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=0Q950&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
RPM Products | |
Rubber Plastics & Metal Products Inc. | |
23201 Antonio Parkway | |
Rancho Santa Margarita, CA 92688 | |
United States | |
949-888-8543 | |
Visit this company's website |
Facility : Yilan, Taiwan
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
BN50-61-2 | [1] | C. HOT | NBR | |
BN60-61-2[2] | [1] | C. HOT | NBR | |
BN70-61-2 | [1] | C. HOT | NBR | |
BN75-61-2 | [1] | C. HOT | NBR | |
BN80-61-2[2] | [1] | C. HOT | NBR | |
EP65-61-2[2] | [3] | C. HOT | EPDM | |
EP70-61-2 | [3] | C. HOT | EPDM | |
EP70-WRC[4] | [5] | C. HOT | EPDM | |
EP70PC-61-2[4] | [5] | C. HOT | EPDM | |
EP80-61-2[2] | [3] | C. HOT | EPDM | |
SI60-61-2[6] | [3] | C. HOT | SLC | |
SI70-61-2[6] | [3] | C. HOT | SLC | |
SI80-61-2[6] | [3] | C. HOT | SLC | |
[1] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L. [2] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 0.2 sq. in./L. [3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [4] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.1 sq. in./L. [5] Certified for a maximum surface area to volume ratio of 1 square inches/L. [6] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 0.15 sq. in./L. |
Mechanical Plumbing Devices
Trade Designation | ||||
Gasket/Sealing Materials |
||||
BN60-61-2[1] | ||||
BN70-61-2[2] | ||||
BN80-61-2[1] | ||||
EP70-61-2[3] | ||||
[1] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 1.0 sq. in./L. [3] Certified for a maximum surface area to volume ratio of 0.3 sq. in./L. |
Number of matching Manufacturers is 1
Number of matching Products is 17
Processing time was 0 seconds