NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, November 21, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=11390&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Ames Fire & Waterworks, a Watts Regulator Co. | |
| 1485 Tanforan Avenue | |
| Woodland, CA 95776 | |
| United States | |
| 530-666-2493 |
Facility : Woodland, CA
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Backflow Preventers [G] |
||||
| 2000SS [x][3] | 2 1/2" - 12" | CLD 23 | MLTPL | |
| 4000SS [x][3] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| C200-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| C200a-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| C400-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| C400a-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| Colt [LFC300 – X]-YY-ZZ-WW-TT[4] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| Colt [LFC500 – X]-YY-ZZ-WW-TT[4] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| LF3000SS [x][3] | 2 1/2" - 12" | CLD 23 | MLTPL | |
| LF5000SS [x][3] | 2 1/2" - 6" | CLD 23 | MLTPL | |
| M200-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| M200a-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| M400-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| M400a-X-YY-ZZ-TT[1] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| Maxim [LFM300 – X]-YY-ZZ-WW-TT[4] | 2 1/2" - 10" | CLD 23 | MLTPL | |
| Maxim [LFM500 – X]-YY-ZZ-WW-TT[4] | 2 1/2" - 10" | CLD 23 | MLTPL | |
[1] X - Valve pattern
Blank - Straight
N - N pattern
Z - Z pattern
YY - Backflow shutoff designation where 2 per units may be mixed like NRS x PIV
BFG - Butterfly valve
DNRS - Domestic non-rising stem gate
DOSY - Domestic outside stem and yoke gate
DPIV - Domestic post indicator gate
NRS - Non-rising stem gate
OSY - Outside stem and yoke gate
PIV - Post indicator gate
QT - Quarter turn ball valve
ZZ - Inlet and outlet connections
Blank - Flange by flange
FxG - Flange by groove
GxF - Groove by flange
GxG - Groove by groove
TT - Strainer options
Blank - No strainer
S - 77F-DI-FDA-125 strainer
S - SS Stainless Strainer 8000F
[3] [X] Indicates possible suffixes:
DNRS - Domestic Non-Rising Stem Gate
DOSY - Domestic Observable Stem and Yoke Gate
NRS - Non-Rising Stem Gate
OSY - Observable stem and yoke gate
CFM is the output of the water meter in cubic feet per minute
GPM is the output of the water meter in gallons per minute
GPM is the output of the water meter in gallons per minute
UG - Ungated, gates ship separately
LG - Less Gate
LF - Lead Free
FS - Flood Sensor
TS - Tamper Switch
SR - Red Silicone
[4] X refers to the Valve Pattern
Blank: Straight
N: N pattern
Z: Z pattern
YY refers to Backflow Shutoff Designation where 2 per units may be mixed like NRS x
PIV:
DNRS - Domestic Non-Rising Stem Gate
DOSY - Domestic Observable Stem and Yoke Gate
NRS - Non-Rising Stem Gate
OSY - Observable stem and yoke gate
PIV: Post Indicator Gate
DPIV: Domestic Post Indicator Gate
BFG: Butterfly Valve
QT: Quarter Turn Ball Valve
ZZ refers to Inlet and Outlet Connections:
Blank: Flange by Flange
FxG: Flange by Groove
GxF: Groove by Flange
GxG: Groove by Groove
WW refers to the By-Pass Meter Option:
LM: Less Meter
C: Cubic Feet per Minute
G: Gallons Per Minute
TT Strainer Options
Blank No Stainer
S Strainer 77F-DI-FDA-125
S-SS Stainless Strainer 8000F
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
|
Valves[2] [G] |
||||
| 605D Series | 3" - 24" | CLD 23 | MLTPL | |
| 605S Series | 6" - 24" | CLD 23 | MLTPL | |
| 905D Series | 1 1/4" - 16" | CLD 23 | MLTPL | |
| 905S Series | 4" - 16" | CLD 23 | MLTPL | |
[2] The following accessories are use with the globe or angle pattern control valve tubing
and fittings:
Model LFFBV-3C-M1 Ball Valves (1/4" - 1")
Figure 60 Flow Clean Strainer (1/4" - 1")
263SS Pressure reducing pilot
Mechanical check option
Anti-Cavitation trim option
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[1] [G] |
||||
| IBR (X)(Y) | 4" - 12" | CLD 23 | MLTPL | |
| IBR2 (X)(Y) | 2" - 3" | CLD 23 | MLTPL | |
[1] May consist of any of below:
(X) - Inlet connection
GRV - Grooved end
CIPS - Cast iron pipe size
FLG - Flanged end
THR - Thread
(Y) - Outlet connection
GRV - Grooved end
CIPS - Cast iron pipe size
FLG - Flanged end
THR - Thread
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Fort Worth, TX
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[1] [G] |
||||
| IBR (X)(Y) | 4" - 12" | CLD 23 | MLTPL | |
| IBR2 (X)(Y) | 2" - 3" | CLD 23 | MLTPL | |
[1] May consist of any of below:
(X) Inlet connection
CIPS - Cast Iron Pipe Size
FLG - Flanged End
GRV - Grooved end
THR - Thread
(Y) Outlet connection
CIPS - Cast Iron Pipe Size
FLG - Flanged End
GRV - Grooved end
THR - Thread
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 24
Processing time was 0 seconds

