NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, April 23, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=14370&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.


 
Superior Seals Ltd. 
8, Nimrod Way
Ferndown Industrial Estate 
Wimborne, Dorset BH21 7SH 
United Kingdom 
44 120 285 4300

Facility : # 1 United Kingdom

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials [G]
EP 1/1/5 [1] C. HOT EPDM
EP 10/00/2 [2] C. HOT EPDM
EP 11/01/13[3] [2] C. HOT EPDM
EP 12/2/5 BLK [1] C. HOT EPDM
EP 50/1[4] [2] C. HOT EPDM
EP 80/2[3] [2] C. HOT EPDM
EP11/7/4 [2] C. HOT EPDM
EP3/6/4 [2] C. HOT EPDM
S350 [5] C. HOT SLC
Superior WN 12-7-1[6] [2] C. HOT NBR
WN70/3 [7] D. HOT NBR

[1] Certified for a maximum surface area to volume ratio of 5.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.8 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 7.27 sq. in./L.
[6] Has been evaluated for use in submersible pumps as check valve seats, seal rings,
    bearings and o-rings.
[7] Certified for a maximum surface area to volume ratio of 2.4 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

O-Rings [G]
EP 12/2/5 BLK [1] C. HOT EPDM
EP11/7/4 [2] C. HOT EPDM
EP3/6/4 [2] C. HOT EPDM
WN70/3 [7] D. HOT NBR

[1] Certified for a maximum surface area to volume ratio of 5.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[7] Certified for a maximum surface area to volume ratio of 2.4 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Mechanical Plumbing Devices

Trade Designation      

Gasket/Sealing Materials[G]
EP 1/1/5[1]      
EP3/6/4[1]      

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in /L.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

O-Rings[G]
EP3/6/4[1]      

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in /L.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 2 United Kingdom

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials [G]
EP 1/1/5 [1] C. HOT EPDM
EP 1/1/5 SC4 Coated [2] C. HOT EPDM
EP 10/00/2 [2] C. HOT EPDM
EP 10/7/7 BLK [1] C. HOT EPDM
EP 11/01/13[3] [2] C. HOT EPDM
EP 4/11/28[3] [2] C. HOT EPDM
EP11/7/4 [2] C. HOT EPDM
EP3/6/4 [2] C. HOT EPDM
S350 [4] C. HOT SLC
Superior WN 12-7-1[5] [2] C. HOT NBR
VF75GRN[3] [7] C. HOT FE
WN70/3 [6] D. HOT NBR

[1] Certified for a maximum surface area to volume ratio of 5.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq./in./L.
[4] Certified for a maximum surface area to volume ratio of 7.27 sq. in./L.
[5] Has been evaluated for use in submersible pumps as check valve seats, seal
    rings, bearings and o-rings.
[6] Certified for a maximum surface area to volume ratio of 3.0 sq. in./L.
[7] Certified for a maximum surface area to volume ratio of 4.5 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

O-Rings [G]
EP 10/7/7 BLK [1] C. HOT EPDM
EP10/7/7 SC4 Coated [1] C. HOT EPDM
EP11/7/4 [2] C. HOT EPDM
EP3/6/4 [2] C. HOT EPDM
VF75GRN[3] [7] C. HOT FE
WN70/3 [6] D. HOT NBR

[1] Certified for a maximum surface area to volume ratio of 5.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq./in./L.
[6] Certified for a maximum surface area to volume ratio of 3.0 sq. in./L.
[7] Certified for a maximum surface area to volume ratio of 4.5 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Mechanical Plumbing Devices

Trade Designation      

Gasket/Sealing Materials[G]
EP 1/1/5[1]      
EP11/7/4[1]      
EP3/6/4[1]      

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in /L.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

O-Rings[G]
EP11/7/4[1]      
EP3/6/4[1]      

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in /L.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 41
Processing time was 0 seconds