NSF Product and Service Listings

These NSF Official Listings are current as of Monday, September 23, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=18910&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Anvil International, LLC 
2 Holland Way
Exeter, NH 03833 
United States 
603-418-2800


Facility : Oakland, IA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
Gruvlok CS (GALV) Figure 7050LR 90° Long Radius Elbow 1" - 24" CLD 23 GALV
Gruvlok CS (GALV) Figure 7051LR 45° Long Radius Elbow 1" - 24" CLD 23 GALV
Gruvlok CS (GALV) Figure 7052 22 1/2° Elbow 1" - 24" CLD 23 GALV
Gruvlok CS (GALV) Figure 7053 11 1/4 ° Elbow 1" - 24" CLD 23 GALV
Gruvlok CS (GALV) Figure 7060 Standard Tee 1" - 24" CLD 23 GALV
Gruvlok CS (GALV) Figure 7061 Reducing Tee[1] 1 1/4" - 24" CLD 23 GALV
Gruvlok CS (GALV) Figure 7069 45° Lateral 1" - 24" CLD 23 GALV
Gruvlok CS (GALV) Figure 7070 45° Reducing Lateral 3"X3"X2"-24"X24"X20" CLD 23 GALV
Gruvlok CS (GALV) Figure 7072 Concentric Reducer 1 1/4"X1" - 24"X20" CLD 23 GALV
Gruvlok CS (GALV) Figure 7073 Eccentric Reducer 1 1/4"X1" - 24"X20" CLD 23 GALV
Gruvlok CS (GALV) Figure 7074 End Cap 1" - 24" CLD 23 GALV

[1] The configuration range for the Gruvlok CS (GALV) Figure 7061 Reducing Tee 1 1/4" x 1
    1/4" x 1" - 24" x 24" x 20".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : Dayton, NJ

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Service Saddles[1] [G]
Gruvlok Figure 6045 Copper Mechanical Outlet Tee 2 1/2x3/4"-4x1 1/2" C. HOT MLTPL
Gruvlok Figure 6047 Copper Mechanical Outlet Cross 2 1/2x3/4"-4x1 1/2" C. HOT MLTPL

[1] Certified for the following configurations:
    2 1/2" x 3/4"
    2 1/2" x 1"
    2 1/2" x 1 1/2"
    3" x 3/4"
    3" x 1"
    3" x 1 1/2"
    4" x 3/4"
    4" x 1"
    4" x 1 1/2"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
Grinnell Figure 601 45° Elbow 2" - 8" C. HOT BRASS
Grinnell Figure 610 90° Elbow 2" - 8" C. HOT BRASS
Grinnell Figure 618 Groove x Groove x Cup Tee 3/4" - 4" C. HOT BRASS
Grinnell Figure 619 Tee 2" - 8" C. HOT BRASS
Grinnell Figure 621 Reducing Tee 2" - 8" C. HOT BRASS
Grinnell Figure 650 Concentric Reducer 2" - 8" C. HOT BRASS
Grinnell Figure 660 End Cap 2" - 8" C. HOT BRASS
Gruvlok Figure 601 Copper 45° Elbow 2" - 8" C. HOT BRASS
Gruvlok Figure 610 Copper 90° Elbow 2" - 8" C. HOT BRASS
Gruvlok Figure 618 Copper Groove x Groove X Cup Tee 3/4" - 4" C. HOT BRASS
Gruvlok Figure 619 Copper Tee 2" - 8" C. HOT BRASS
Gruvlok Figure 621 Copper Reducing Tee 2" - 8" C. HOT BRASS
Gruvlok Figure 650 Copper Concentric Reducer 2" - 8" C. HOT BRASS
Gruvlok Figure 660 Copper End Cap 2" - 8" C. HOT BRASS

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : Columbia, PA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Couplings[G]
Gruvlok Figure 405 Flexible Coupling 1" - 8" C. HOT EPDM
Gruvlok Figure 472 Rigid Coupling 1 1/4" - 12" C. HOT EPDM
Gruvlok Figure 770 Rigid Coupling 2" - 8" C. HOT EPDM

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings
1011 CI THREADED COMPANION FLANGE[G] ¾"x3 7/8"-12"x19" CLD 23 GALV
1018 CI BLIND FLANGE[G] 1" x 4 ¼"-12" x 19" CLD 23 GALV
1035 GALV MI 125 F&D THIRD FLG 1 1/2 x 5 - 8 x 13 1/2[G] 1½" x 5" - 8" x 13½" CLD 23 GALV
1035 GALV MI 125 F&D THIRD RED FLG 3 x 9 - 4 x 11[G] 3" x 9" - 4" x 11" CLD 23 GALV
1101 GALV MI 90 ELL 1/8 - 6[G] 1/8" - 6" CLD 23 GALV
1101R GALV MI 90 ELL 1/4 x 1/8 - 4 x 3[G] 1/4" x 1/8"-4" x 3" CLD 23 GALV
1102 GALV MI 45 ELL 1/8 - 6[G] 1/8" - 6" CLD 23 GALV
1103 GALV MI 90 STREET ELL 1/8 - 4[G] 1/8" - 4" CLD 23 GALV
1103R GALV MI 90 STREET ELL 1/2 x 3/8 - 2 x 1 1/2[G] 1/2"x3/8"-2"x1 1/2" CLD 23 GALV
1104 GALV MI 45 STREET ELL 1/8 - 2[G] 1/8" - 2" CLD 23 GALV
1105 GALV MI TEE 1/8 - 6[G] 1/8" - 6" CLD 23 GALV
1105R GALV MI TEE[G] [1] CLD 23 GALV
1106 GALV MI STREET TEE 1/4 - 2[G] 1/4" - 2" CLD 23 GALV
1106R GALV MI STREET TEE 1 1/4 x 1 x 1 1/4[G] 1 1/4" x 1" x 1 1/4" CLD 23 GALV
1107 GALV MI CROSS 1/8 - 4[G] 1/8" - 4" CLD 23 GALV
1108 GALV MI WYE 3/8 - 4[G] 3/8" - 4" CLD 23 GALV
1109 GALV MI PLAIN/PAT S/O 90 ELL 1/4 - 2[G] 1/4" - 2" CLD 23 GALV
1113 GALV MI PLAIN/PAT S/O TEE 1/2 - 2[G] 1/2" - 2" CLD 23 GALV
1119 GALV MI CLOSE RETURN BEND 1 - 2 1/2[G] 1" - 2 1/2" CLD 23 GALV
1121 GALV MI RH COUPLING 1/4 - 4[G] 1/4" - 4" CLD 23 GALV
1121 GALV STEEL RH COUPLING 1/8[G] 1/8" CLD 23 GALV
1124 GALV MI CAP 1/8 - 6[G] 1/8" - 6" CLD 23 GALV
1125 GALV MI REDUCER[G] 1/4"x1/8" - 6"x4" CLD 23 GALV
1133 GALV MI WASTE NUT 1/8 - 2[G] 1/8" - 2" CLD 23 GALV
1134 GALV MI HEX LOCKNUT 1/8 - 2[G] 1/8" - 2" CLD 23 GALV
1137 GALV MI EXTENTION PIECE 3/8 - 1[G] 3/8" - 1" CLD 23 GALV
1138 GALV MI EXTENTION PIECE 1/2 - 1[G] 1/2" - 1" CLD 23 GALV
1160 XH GALV MI AAR 45 STREET ELL 1/2 - 1[G] 1/2" - 1" CLD 23 GALV
1161 XH GALV MI AAR 90 ELL 1/4- 6[G] 1/4" - 6" CLD 23 GALV
1161R XH GALV MI AAR 90 ELL 3/4 x 1/2 - 2 1/2 x 2[G] 3/4"x1/2"-2 1/2"x2" CLD 23 GALV
1162 XH GALV MI AAR 45 ELL 1/4 - 4[G] 1/4" - 4" CLD 23 GALV
1163 XH GALV MI AAR CAP 1/4 - 3[G] 1/4" - 3" CLD 23 GALV
1164 XH GALV MI AAR TEE 1/4 - 6[G] 1/4" - 6" CLD 23 GALV
1164R XH GALV MI AAR TEE[G] ½"x½"x¼" - 4"x4"x2½" CLD 23 GALV
1165 XH GALV MI AAR CROSS 1/4 - 3[G] 1/4" - 3" CLD 23 GALV
1166 XH GALV MI AAR CPLG 1/4 - 3[G] 1/4" - 3" CLD 23 GALV
1167 XH GALV MI AAR REDUCER 3/8 x 1/4 - 4 x 3[G] 3/8"x1/4" - 4"x3" CLD 23 GALV
1170 XH GALV MI AAR 90 STREET ELL 1/4 - 3[G] 1/4" - 3" CLD 23 GALV
1190 DI FLOOR FLANGE[G] ¼"x2 3/16"-2"x5 ½" CLD 23 GALV
1190 DI THREADED FLOOR FLANGE[G] ¼"x2 3/16"-2"x5 ½" C. HOT GALV
1190 GALV FLOOR FLANGE 1/2 - 2[G] 1/2" - 2" CLD 23 GALV
1190 GALV MI FLOOR FLANGE 2 1/2 - 3[G] 2 1/2" - 3" CLD 23 GALV
383 CI THREADED HEX BUSHING[G] 1 ½" x ¼" - 10" x 8" CLD 23 GALV
383 GALV MI HEX BUSHING[G] ½"x3/8" - 2 ½"x2" CLD 23 GALV
385 GALV MI FACE BUSHING[G] 1/4"x1/8" - 3"x2 ½" CLD 23 GALV
387 CI THREADED CORED SQUARE HEAD PLUG[G] 3/4" - 4" CLD 23 GALV
388 CI THREADED SOLID SQUARE HEAD PLUG[G] 1/2" - 3-1/2" CLD 23 GALV
389 CI THREADED CORED BAR PLUG[G] 4" - 8" CLD 23 GALV
390 CI THREADED COUNTERSUNK PLUG[G] 1" - 4" CLD 23 GALV
390 GALV MI SQ C/S PLUG 1/2 - 1 1/2[G] 1/2" - 1 1/2" CLD 23 GALV
487 CI THREADED FLANGED UNION[G] 1/2" - 8" CLD 23 GALV
701 CI THREADED 90 SHORT TURN ELBOW[G] 1 1/2" - 4" CLD 23 GALV
702 CI THREADED 90 LONG TURN ELBOW[G] 1 1/2" - 4" CLD 23 GALV
705 CI THREADED 45 SHORT TURN ELBOW[G] 1 1/2" - 4" CLD 23 GALV
7050 DI GRV 90 ELBOW[G] 1" - 12" CLD 23 GALV
7051DI GRV 45 ELBOW[G] 1" - 12" CLD 23 GALV
7052 DI GRV 22-1/2 ELBOW[G] 1" - 12" CLD 23 GALV
706 CI THREADED 45 LONG TURN ELBOW[G] 1 1/2" CLD 23 GALV
7060 DI GRV TEE[G] 1" - 12" CLD 23 GALV
7061 DI GRV STANDARD REDUCING TEE[G] [2] CLD 23 GALV
7064 DI REDUCING THREADED BRANCH TEE[G] 2"x2"x¾" 12"x10" CLD 23 GALV
707 CI THREADED 22-1/2 ELBOW[G] 1 1/2" - 2" CLD 23 GALV
7072 DI GRV CONCENTRIC REDUCER[G] 1 ¼" x 1"-12" x 10" CLD 23 GALV
7074 DI GRV CAP[G] 1" - 12" CLD 23 GALV
7077 DI GRV SWAGED NIPPLES[G] 2" x 1" - 6" x 5" CLD 23 GALV
7078 DI GRV SWAGED NIPPLES[G] 2" x 1" - 6" x 5" CLD 23 GALV
7079 DI GRV SWAGED NIPPLES[G] 2" x 1" - 6" x 5" CLD 23 GALV
7086 DI GRV HOSE NIPPLE[G] 1" - 12" CLD 23 GALV
718 CI THREADED 90 STREET ELBOW[G] 1 1/2" - 2" CLD 23 GALV
719 CI THREADED 45 STREET ELBOW[G] 1 1/2" - 2" CLD 23 GALV
722 CI THREADED TEE[G] 1 1/2" - 2" CLD 23 GALV
726 CI THD 90 SHORT TURN Y-BRANCH TEE[G] 1 1/2" - 4" CLD 23 GALV
734 CI THREADED 45 Y-BRANCH[G] 1 1/2" - 4" CLD 23 GALV
735 CI THREADED 45 REDUCING Y-BRANCH[G] 2"x2"x1½" - 4"x4"x3" CLD 23 GALV
752 CI THREADED P-TRAP[G] 1 1/2" - 3" CLD 23 GALV
753 CI COUPLING[G] 1 1/2" CLD 23 GAC
7788 Gruvlok Flange Adapter[G] 2" - 12" CLD 23 GALV
801 CI (GALV) FLANGED 90 ELBOW 1 1/2" - 12" CLD 23 GALV
802 CI (GALV) FLANGED 45 ELBOW 1 1/2" - 12" CLD 23 GALV
803 CI (GALV) FLANGED REDUCING 90 ELBOW 2½" x 2" - 12" x 10" CLD 23 GALV
804 CI (GALV) FLANGED LONG RADIUS 90 ELBOW 2" - 12" CLD 23 GALV
804R CI (GALV) FLANGED LONG RADIUS. REDUCING 90 ELBOW 4" x 3" - 10" x 8" CLD 23 GALV
805 CI (GALV) FLANGED BASE 90 ELBOW 3" - 12" CLD 23 GALV
808 CI (GALV) FLANGED SIDE OUTLET 90 ELBOW 4" - 8" CLD 23 GALV
811 CI (GALV) FLANGED TEE 1 1/2" - 12" CLD 23 GALV
812 CI (GALV) FLANGED REDUCING TEE 3"x2x1½"-12"x12x10" CLD 23 GALV
821 CI (GALV) FLANGED CROSS 2" - 10" CLD 23 GALV
823 CI (GALV) FLANGED LATERAL 2" - 8" CLD 23 GALV
825 CI (GALV) FLANGED CONCENTRIC REDUCER 2" x 1½" - 12" x 10" CLD 23 GALV
826 CI (GALV) FLANGED ECCENTRIC REDUCER 3" x 2" - 12" x 10" CLD 23 GALV
GALV MI 90 F DROP ELL 1/2 - 3/4[G] 1/2" - 3/4" CLD 23 GALV
Gruvlok Figure 6012 Copper Flange Adapter[G] 2" - 8" C. HOT EPDM
Gruvlok Figure 7000 Lightweight Flexible Coupling[G] 1" - 12" C. HOT EPDM
Gruvlok Figure 7001 Standard Coupling[G] 1" - 12" C. HOT EPDM
Gruvlok Figure 7005 Roughneck Coupling[G] 1" - 16" C. HOT EPDM
Gruvlok Figure 7010 Reducing Coupling[G] 1" - 12" C. HOT EPDM
Gruvlok Figure 7012 Flange Adaptor[G] 2" - 12" C. HOT EPDM
Gruvlok Figure 7013 Flange Adaptor (#300)[G] 2" - 12" C. HOT EPDM
Gruvlok Figure 7305 HDPE Coupling[G] 2" - 12" C. HOT EPDM
Gruvlok Figure 7307 HDPE Transition Coupling[G] 2" - 12" C. HOT EPDM
Gruvlok Figure 7400 Rigidlite Coupling[G] 1" - 12" C. HOT EPDM
Gruvlok Figure 7401 Rigidlok Coupling[G] 1" - 12" C. HOT EPDM
Slidelok Figure 74 Coupling[G] 2" - 12" C. HOT EPDM

[1] 1/8" x 1/8" x 1/8" - 6" x 6" x 4"
[2] 1 1/4" x 1 1/4" x 1" - 12" x 12" x 10"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : Green Bay, WI

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
AnvilPress Figure 477 Transition Nipple (Groove x Male Press) 1" - 2" C. HOT SS
Gruvlok Figure 652 Copper Concentric Reducer[1] [2] 2" x 1" - 4" x 2" C. HOT CU
Gruvlok Figure A7050SS 90° Elbow[3] 1" - 12" C. HOT SS
Gruvlok Figure A7051SS 45° Elbow[3] 1" - 12" C. HOT SS
Gruvlok Figure A7060SS Standard Tee[3] 1" - 12" C. HOT SS
Gruvlok Figure A7061SS Reducing Tee[3] 1" - 12" C. HOT SS
Gruvlok Figure A7072SS Concentric Reducer[3] 1" - 12" C. HOT SS
Gruvlok Figure A7073SS Eccentric Reducer[3] 1" - 12" C. HOT SS
Gruvlok Figure A7074SS End Cap[3] 1" - 12" C. HOT SS
Gruvlok Figure A7084SS #150 Flange Adapter[3] 1" - 12" C. HOT SS

[1] Certification does not include any additional fittings or gaskets.
[2] Copper tube (Alloy C12200) is Certified by NSF to NSF/ANSI/CAN 61 for use in drinking
    water supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5
    may require corrosion control to limit leaching of copper into the drinking water.
[3] The "A" prefix in the product trade names may be removed to denote domestic
    identification.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 143
Processing time was 0 seconds