NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=1F510&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Xiamen Maifeng Seal Products Co., Ltd. 
No. 2288 Tongan Avenue
Tongan Region, Xiamen City 
Fujian 361100 
China 
86 592 7111403
Visit this company's website


Facility : Fujian, China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials[1]
EP5118F [2] C. HOT EPDM
EP6118F [2] C. HOT EPDM
EP7068PF [2] C. HOT EPDM
EP7118F [2] C. HOT EPDM
EP8018F [2] C. HOT EPDM
N7118F [2] C. HOT NBR
S7008F [2] C. HOT SLC
SIL 6008F [2] C. HOT SLC
VT7518F [2] C. HOT FE 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certification for a maximum surface area to volume ratio of 2.0 sq. in./L.

O-Rings[1]
EP5118F [2] C. HOT EPDM
EP6118F [2] C. HOT EPDM
EP7068PF [2] C. HOT EPDM
EP7118F [2] C. HOT EPDM
EP8018F [2] C. HOT EPDM
N7118F [2] C. HOT NBR
S7008F [2] C. HOT SLC
SIL 6008F [2] C. HOT SLC
VT7518F [2] C. HOT FE 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certification for a maximum surface area to volume ratio of 2.0 sq. in./L.


Mechanical Plumbing Devices

Trade Designation      

Gasket/Sealing Materials[1]
E7008F[2]      
EP5118F[2]      
EP6118F[2]      
EP7118F[2]      
EP8018F      
EP9118F[2] [G]      
N6118F[2]      
N7008F[2]      
N7118F[2]      
S7008F[2]      
SIL4008F[2]      
SIL5008F[2]       

[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

O-Rings[1]
E7008F[2]      
EP5118F[2]      
EP6118F[2]      
EP7118F[2]      
EP8018F      
EP9118F[2] [G]      
N6118F[2]      
N7008F[2]      
N7118F[2]      
S7008F[2]      
SIL4008F[2]      
SIL5008F[2]       

[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Water Bladders
CIIR6508F [1] CLD 23 BUTYL 

[1] Certified for maximum surface area to volume ratio of 8.5 square inches per liter.

Number of matching Manufacturers is 1
Number of matching Products is 43
Processing time was 0 seconds