NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=1P550&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Penetron International, Ltd. 
45 Research Way
Suite 203 
East Setauket, NY 11733 
United States 
631-941-9700
Visit this company's website


Facility : Allentown, PA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Tank
Penetron[1] [2] >= 60,000 gal. CLD 23 CMNT 

[1] Number of Coats: 1-2
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 200
    Maximum Thinner: None
    Recoat Cure Time and Temperature: Immediate
    Final Cure Time and Temperature: 48 hours at ambient temperature
    Special Comments: 2.0 parts powder is mixed with 0.8 parts water, by volume, to make the
    coating
[2] Certified for use as a crack or void repair material. Repaired area not to exceed 5% of
    the surface area for pipes 6" and greater and for tanks 1,000 gallons and greater.

Concrete Admixtures
PENETRON ADMIX [3] CLD 23 CMNT
PENETRON ADMIX Liquid [3] CLD 23 CMNT
Penetron Admix Liquid with Tracer [3] CLD 23 CMNT
Penetron Admix with Tracer [3] CLD 23 CMNT 

[3] Penetron Admix and Penetron Admix with Tracer are Certified for a level not to exceed 1%
    by mass of cement.
    Penetron Admix Liquid and Penetron Admix Liquid with Tracer are Certified for a level
    not to exceed 16 fl. oz. per 100 lbs. of cement. 
    Certified for use in pipes 12" and greater, tanks 1,000 gallons and greater.



Facility : Tamil Nadu, India

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Tank
Penetron[1] [2] >= 60,000 gal. CLD 23 CMNT 

[1] Number of Coats: 1-2
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 200
    Maximum Thinner: None
    Recoat Cure Time and Temperature: Immediate
    Final Cure Time and Temperature: 48 hours at ambient temperature
    Special Comments: 2.0 parts powder is mixed with 0.8 parts water, by volume, to make the
    coating
[2] Also Certified for use as a crack or void repair material. Repaired area not to exceed
    5% of the surface area for pipes 6" and greater and for tanks 1,000 gallons and greater.

Concrete Admixtures
PENETRON Admix [3] CLD 23 CMNT
Penetron Admix with Tracer [3] CLD 23 CMNT 

[3] Penetron Admix and Penetron Admix with Tracer are Certified for a level not to exceed 1%
    by mass of cement. 
    Certified for use in pipes 12" and greater, tanks 1,000 gallons and greater.

Number of matching Manufacturers is 1
Number of matching Products is 8
Processing time was 0 seconds