NSF Product and Service Listings
These NSF Official Listings are current as of Monday, September 23, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=1W990&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
ITG SRL | |
Via Fusline 36 | |
25036 Palazzolo Sull'Oglio (Brescia) | |
Italy | |
39 030 7403534 |
Facility : Palazzolo Sull'Oglio (Brescia), Italy
Mechanical Plumbing Devices
Trade Designation | ||||
Gasket/Sealing Materials[1] |
||||
EPDM[2] |
||||
PX70N-0201 | ||||
[2] Certified for a maximum surface area to volume rato of 2.0 sq. in./L. |
||||
HTV[2] |
||||
HT45BL2-0201 | ||||
HT50BL2-0201 | ||||
HT55BL2-0202 | ||||
HT60BL2-0201 | ||||
[2] Certified for a maximum surface area to volume rato of 2.0 sq. in./L. |
||||
LSR[2] [3] |
||||
LS40T-0301 | ||||
LS50T-0301 | ||||
LS60T-0301 | ||||
LS70T-0301 | ||||
LS80T-0301 | ||||
[2] Certified for a maximum surface area to volume rato of 2.0 sq. in./L. [3] Certified for the following colors: black, blue, green, grey, red, white, and clear. |
||||
NBR |
||||
NB55N-0201[4] | ||||
NB60N-0203[4] | ||||
NB65N-0201[4] | ||||
NB70N-0203[4] | ||||
NB75N-0201[5] | ||||
NB80N-0203[5] | ||||
NB85N-0202[5] | ||||
[4] Certified for a maximum surface area to volume ratio of 0.25 sq. in./L. [5] Certified for a maximum surface area to volume ratio of 0.3 sq. in./L. |
||||
[1] This product does not require a Q statistic. It is made from material or materials that do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3. |
Number of matching Manufacturers is 1
Number of matching Products is 17
Processing time was 0 seconds