NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=21230&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Lavelle Industries, Inc. | |
665 McHenry Street | |
Burlington, WI 53105 | |
United States | |
262-757-2210 | |
Visit this company's website |
Facility : Burlington, WI
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
F35019 Chlorazone® Black[1] | [2] | C. HOT | EPDM | |
F35304 Chlorazone® Red | [2] | C. HOT | EPDM | |
F36025[1] | [2] | C. HOT | EPDM | |
F36035[1] | [2] | C. HOT | EPDM | |
F36308 Chlorazone®[3] | [2] | C. HOT | EPDM | |
F37016[1] | [2] | C. HOT | EPDM | |
F37018[4] | [2] | CLD 23 | EPDM | |
F37028 | [2] | C. HOT | EPDM | |
F37300 Chlorazone®[3] | [2] | C. HOT | EPDM | |
F38008[5] | [2] | CLD 23 | EPDM | |
F38009[5] | [2] | CLD 23 | EPDM | |
F38012 | [2] | C. HOT | EPDM | |
F38013 | [2] | C. HOT | EPDM | |
F38015 | [2] | C. HOT | EPDM | |
F39300 Chlorazone® Red[3] | [2] | C. HOT | EPDM | |
F95301[6] | [2] | CLD 23 | BUTYL | |
[1] This product has also been evaluated for use in Mechanical Device applications with a maximum surface area to volume ratio of 2.0 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [3] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 2.0 sq. in./L. [4] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 0.4 sq. in./L. [5] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 1.0 sq. in./L. [6] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 0.5 sq. in./L. |
Mechanical Plumbing Devices
Trade Designation | ||||
Gasket/Sealing Materials[1] [2] |
||||
F36025 | ||||
F37016 | ||||
[1] Certified as a faucet component for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] This product does not require a Q statistic. It is made from material or materials that do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3. |
Number of matching Manufacturers is 1
Number of matching Products is 18
Processing time was 0 seconds