NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=21710&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Hempel (USA), Inc. 
600 Conroe Park North
Conroe, TX 77303 
United States 
800-678-6641 
936-523-6000


Facility : Conroe, TX

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
Hempadur Multi-Strength 35535[1] >= 3" CLD 23 EPOXY 

[1] Colors: 35535-10504 Grey, 35535-51324 Red
    Number of Coats: 1-2
    Sequence of Coats: 1 coat: red 51324 or grey 10504 2 coats: red 51324 then grey 10504
    Maximum Field Use Dry Film Thickness (in mils): 1 coat application: 20; 2 coat
    application: 20 (12 mils red, 8 mils grey)
    Recoat Cure Time and Temperature: 24 hours at 20°C
    Final Cure Time and Temperature: 7 days at 20°C
    Special Comments: Mix ratio of base:cure agent is 3:1 by volume; 10 minute induction
    period.

Coatings - Pipe
Hempadur Multi-Strength 35535[1] >= 48" CLD 23 EPOXY 

[1] Colors: 35535-10504 Grey, 35535-51324 Red
    Number of Coats: 1-2
    Sequence of Coats: 1 coat: red 51324 or grey 10504 2 coats: red 51324 then grey 10504
    Maximum Field Use Dry Film Thickness (in mils): 1 coat application: 20; 2 coat
    application: 20 (12 mils red, 8 mils grey)
    Recoat Cure Time and Temperature: 24 hours at 20°C
    Final Cure Time and Temperature: 7 days at 20°C
    Special Comments: Mix ratio of base:cure agent is 3:1 by volume; 10 minute induction
    period.

Coatings - Tank
Hempadur Multi-Strength 35535[1] >= 1000 gal. CLD 23 EPOXY 

[1] Colors: 35535-10504 Grey, 35535-51324 Red
    Number of Coats: 1-2
    Sequence of Coats: 1 coat: red 51324 or grey 10504 2 coats: red 51324 then grey 10504
    Maximum Field Use Dry Film Thickness (in mils): 1 coat application: 20; 2 coat
    application: 20 (12 mils red, 8 mils grey)
    Recoat Cure Time and Temperature: 24 hours at 20°C
    Final Cure Time and Temperature: 7 days at 20°C
    Special Comments: Mix ratio of base:cure agent is 3:1 by volume; 10 minute induction
    period.

Coatings - Valve
Hempadur Multi-Strength 35535[1] >= 2" CLD 23 EPOXY 

[1] Colors: 35535-10504 Grey, 35535-51324 Red
    Number of Coats: 1-2
    Sequence of Coats: 1 coat: red 51324 or grey 10504 2 coats: red 51324 then grey 10504
    Maximum Field Use Dry Film Thickness (in mils): 1 coat application: 20; 2 coat
    application: 20 (12 mils red, 8 mils grey)
    Recoat Cure Time and Temperature: 24 hours at 20°C
    Final Cure Time and Temperature: 7 days at 20°C
    Special Comments: Mix ratio of base:cure agent is 3:1 by volume; 10 minute induction
    period.

Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds