NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 13, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=29830&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
BASF Construction Chemicals 
23700 Chagrin Boulevard
Cleveland, OH 44122 
United States 
800-628-9990 
216-839-7000
Visit this company's website


Facility : Cucamonga, CA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures[1]
MasterGlenium 7620 [2] CLD 23 CMNT
MasterGlenium 7920 [2] CLD 23 CMNT
MasterGlenium 7925 [2] CLD 23 CMNT
MasterLife® SRA 035 [3] CLD 23 CMNT
MasterPozzolith 322 [4] CLD 23 CMNT
MasterPozzolith 700 [5] CLD 23 CMNT
MasterSure Z 60 [6] CLD 23 CMNT
Pozzolith 322N [4] CLD 23 CMNT
Pozzolith® 700N [5] CLD 23 CMNT
RheoTEC Z-60 [6] CLD 23 CMNT

[1] All Listed products from this facility are NSF Certified, whether or not they bear the
    NSF Mark.
[2] Certified for a level not to exceed 15 fluid oz. per 100 pounds of cement.
    Certified for use in tanks 200 gallons and greater and pipes 6" in diameter and greater.
[3] Certified for a maximum use level of 1.5 gallons per cubic yard of concrete.  Certified
    for use in tanks 200,000 gallons and greater and pipes 120 inches and greater.
[4] Certified for a maximum use level of 7 fluid ounces per 100 pounds of cement. Certified
    for use in tanks 1500 gallons and greater and pipes and fittings 36" and greater.
[5] Certified for a maximum use level of 5 fluid ounces per 100 pounds of cement.  Certified
    for use in tanks 200 gallons and greater and pipes and fittings 8 inches and greater.
[6] Certified for use in tanks 200 gallons and greater and pipes and fittings 6" and
    greater.
    Certified for a maximum use level of 12 fluid ounces per 100 pounds of cement.



Facility : Newark, CA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Patching Materials
MasterSeal 590 [1] CLD 23 CMNT
Waterplug [1] CLD 23 CMNT

[1] Certified for use as patching material up to 10% if the surface area in tanks 50 gallons
    or greater.


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Tank
MasterSeal 581 Gray[1] >= 6000 gal. CLD 23 CMNT
MasterSeal 581 White[2] >= 6000 gal. CLD 23 CMNT
Thoroseal Gray[1] >= 6000 gal. CLD 23 CMNT
Thoroseal White[2] >= 6000 gal. CLD 23 CMNT

[1] Colors: Gray
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 35
    Recoat Cure Time and Temperature: 24 hours at 73°F
    Final Cure Time and Temperature: 7 days at 73°F
    Special Comments: Mix ratio of Part A:Part B is 100:30 by weight. Part B is prepared by
    mixing 1 part Acryl 60 with 3 parts water.
[2] Colors: White
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 35
    Recoat Cure Time and Temperature: 24 hours at 73°F
    Final Cure Time and Temperature: 7 days at 73°F
    Special Comments: Mix ratio of Part A:Part B is 100:30 by weight. Part B is prepared by
    mixing 1 part Acryl 60 with 3 parts water.

Concrete Admixtures[3]
MasterLife 300D [4] [5] CLD 23 CMNT
MasterLife 300D NF[6] [5] CLD 23 CMNT
MasterLife 300D Red[4] [5] CLD 23 CMNT
Rheomac 300D[4] [5] CLD 23 CMNT
Rheomac 300D Red[4] [5] CLD 23 CMNT

[3] All Listed products from this facility are NSF Certified, whether or not they bear the
    NSF Mark.
[4] Certified for a level not to exceed 2.5% of cement content by mass.
[5] Certified for use in tanks 200 gallons and greater and pipes and fittings 6" and greater.
[6] Certified for a level not to exceed 1% of cement content by mass.



Facility : Reynolds, GA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures
Delvo Stabilizer[1] [2] CLD 23 CMNT
MasterLIFE SRA 20[3] [4] CLD 23 CMNT
MasterSet DELVO[1] [2] CLD 23 CMNT

[1] Certified for a level not to exceed 5 fluid oz. per 100 pounds of cement.
[2] Certified for use in pipes 4" and greater, tanks 200 gallons and greater.
[3] Certified for a maximum use level not to exceed 1.5 gallons per cubic yard of concrete.
[4] Certified for use in pipes 120" and greater, and tanks 200,000 gallons and greater.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.


Facility : Williamson, NY

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures
MasterLife CRA 007 [1] CLD 23 CMNT

[1] Certified for a maximum use level not to exceed 2 gallons per cubic yard of concrete. 
    Certified for use in tanks 1,000,000 gallons and greater.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.


Facility : Streetsboro, OH

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Grouts
MasterFlow 1205[1] [2] CLD 23 CMNT
Masterflow 928[3] [4] CLD 23 CMNT

[1] Certified using a moist cure of 24 hours at ambient temperature.
[2] Certified for use in pipes >=4 inches in diameter with a maximum surface area to volume
    ratio of 0.3 square inches/L.
[3] Certified using a moist cure of 7 days at ambient temperature.
[4] Certified for 25% of a 50,000 gallon tank and greater.

Patching Materials
MasterEmaco S 210 SP [5] CLD 23 CMNT
MasterEmaco S 211 SP [5] CLD 23 CMNT
ShotPatch 21 [5] CLD 23 CMNT
ShotPatch 21F [5] CLD 23 CMNT

[5] Certified for use as a patching material for up to 35% of the surface area in pipes 60"
    or greater or up to 35% of the surface area in tanks 10,000 gallons and greater.



Facility : Allentown, PA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures[1]
Glenium 3030 NS [2] CLD 23 CMNT
Glenium 3400 NV [3] CLD 23 CMNT
MB AE 90 [4] CLD 23 CMNT
MB VR Standard [4] CLD 23 CMNT
MasterAir AE 90 [4] CLD 23 CMNT
MasterAir VR 10 [4] CLD 23 CMNT
MasterGlenium 3030 [2] CLD 23 CMNT
MasterGlenium 3400 [3] CLD 23 CMNT
MasterGlenium 7620 [5] CLD 23 CMNT
MasterGlenium 7920 [5] CLD 23 CMNT
MasterGlenium 7925 [5] CLD 23 CMNT
MasterPolyHeed 997 [6] CLD 23 CMNT
MasterPozzolith 200 [7] CLD 23 CMNT
MasterRheobuild 1000 [8] CLD 23 CMNT
MasterSet AC 534 [9] CLD 23 CMNT
MasterSet R 100 [7] CLD 23 CMNT
PolyHeed 997 [6] CLD 23 CMNT
Pozzolith 100XR [7] CLD 23 CMNT
Pozzolith 200N [7] CLD 23 CMNT
Pozzolith NC 534 [9] CLD 23 CMNT
Rheobuild 1000 [8] CLD 23 CMNT

[1] All Listed products from this facility are NSF Certified, whether or not they bear the
    NSF Mark.
[2] Maximum use level not to exceed 18 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 4" and greater, and in tanks 200 gallons and greater.
[3] Maximum use level not to exceed 12 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 6" and greater, and in tanks 100 gallons and greater.
[4] Certified for a level not to exceed 1.5 fluid oz. per 100 pounds of cement.  Certified
    for use in pipes 8" and greater, tanks 200 gallons and greater.
[5] Certified for a level not to exceed 15 fluid oz. per 100 pounds of cement.  Certified
    for use in tanks 200 gallons and greater and pipes 6" in diameter and greater.
    
    
[6] Maximum use level not to exceed 15 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 20" and greater, and in tanks 400 gallons and greater.
[7] Maximum use level not to exceed 5 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 20" and greater.
[8] Maximum use level not to exceed 20 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 6" and greater.
[9] Maximum use level not to exceed 30 fl. oz. per 100 lbs. of cement.  Certified for use in
    pipes 10" and greater, tanks 200 gallons and greater, and fittings 6" in diameter and
    greater.



Facility : Bristol, PA

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Patching Materials
MasterSeal 590 [1] CLD 23 CMNT
Waterplug [1] CLD 23 CMNT

[1] Certified for use as a patching material up to 12% of the surface area in a 2000 gallon
    tank.


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Tank[1]
MasterSeal 581 Gray[2] >= 10,000 gal. CLD 23 CMNT
MasterSeal 581 White[3] >= 10,000 gal. CLD 23 CMNT
Thoroseal Gray[2] >= 10,000 gal. CLD 23 CMNT
Thoroseal White[3] >= 10,000 gal. CLD 23 CMNT

[1] MasterEmaco A 660 may be used with MasterSeal 581 at a rate of one part MasterEmaco A
    660:3 parts water.
[2] Colors: Gray
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 35 wet mils
    Recoat/Cure Time: 24 hours at 73°F
    Final Cure Time: 7 days at 73°F
    Special Comments: Mix ratio of A:B is 100:30. Part B is prepared by mixing 1 part Acryl
    60 with 3 parts water.
[3] Colors: White
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 35 wet mils
    Recoat/Cure Time: 24 hours at 73°F
    Final Cure Time: 7 days at 73°F
    Special Comments: Mix ratio of A:B is 100:30. Part B is prepared by mixing 1 part Acryl
    60 with 3 parts water.



Facility : Houston, TX

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Patching Materials [5]
Emaco S88 CI [1] CLD 23 CMNT
MasterEmaco S 210 SP [2] CLD 23 CMNT
MasterEmaco S 211 SP [2] CLD 23 CMNT
MasterEmaco S 488 Cl [1] CLD 23 CMNT
Masterflow 928[3] [4] CLD 23 CMNT
ShotPatch 21 [2] CLD 23 CMNT
ShotPatch 21F [2] CLD 23 CMNT

[1] Certified for 0.5% coverage of a tank 500,000 gallons or greater.
[2] Certified for use with a maximum of 14% coverage with pipe sizes of 20" and greater, and
    25% coverage with tank sizes of 1000 gallons and greater.
[3] Certified using a moist cure of 7 days at ambient temperature.
[4] Certified for 15% of a 4000 gallon tank and greater.
[5] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are certified.



Facility : Lancaster, TX

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures
Glenium 7500 [1] CLD 23 CMNT
Glenium 7700 [2] CLD 23 CMNT
MasterGlenium 1466 [3] CLD 23 CMNT
MasterGlenium 7500 [1] CLD 23 CMNT
MasterGlenium 7700 [2] CLD 23 CMNT

[1] Certified for a level not to exceed 15 fluid oz. per 100 pounds of cement.  Certified
    for use in pipes 18" in diameter and greater, tanks 200 gallons and greater.
[2] Certified for a level not to exceed 15 fluid oz. per 100 pounds of cement.  Certified
    for use in pipes 6" and greater, tanks 200 gallons and greater.
[3] Certified for a maximum use level of 10 fluid oz. per 100 pounds of cement.  Certified
    for use in tanks 200 gallons and greater and pipes and fittings 6" diameter and greater.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.


Facility : Nisku, Alberta, Canada

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures[1]
MasterAir AE 200[2] [3] CLD 23 CMNT
MasterPozzolith 210[4] [5] CLD 23 CMNT
MasterSet R 122[4] [5] CLD 23 CMNT
MasterSet R 961[4] [5] CLD 23 CMNT
Micro Air®[2] [3] CLD 23 CMNT
Pozzolith 122R[4] [5] CLD 23 CMNT
Pozzolith 961R[4] [5] CLD 23 CMNT

[1] All Listed products from this facility are NSF Certified, whether or not they bear the
    NSF Mark.
[2] Certified for a maximum use level of 1.5 fl. oz. per 100 pounds of cement.
[3] Certified for use in tanks 200 gallons and greater and pipes and fittings 8" and greater.
[4] Certified for a maximum use level of 5 fl. oz. per 100 pounds of cement.
[5] Certified for use in pipes 16" diameter and greater, tanks 200 gallons and greater.


Number of matching Manufacturers is 1
Number of matching Products is 77
Processing time was 0 seconds