NSF Product and Service Listings

These NSF Official Listings are current as of Monday, November 11, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=31590&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.


 
Hydranautics 
401 Jones Road
Oceanside, CA 92058 
United States 
760-901-2656
Visit this company's website


Facility : Oceanside, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Reverse Osmosis Element
CPA2[1] [2] CLD 23 MLTPL
CPA2 8540[1] [2] CLD 23 MLTPL
CPA2 DE[1] [2] CLD 23 MLTPL
CPA3[1] [2] CLD 23 MLTPL
CPA3 LD[1] [2] CLD 23 MLTPL
CPA3-D[3] 8" x 40" CLD 23 MLTPL
CPA4[1] [2] CLD 23 MLTPL
CPA5[1] [2] CLD 23 MLTPL
CPA5 LD[1] [2] CLD 23 MLTPL
CPA5 MAX[1] [2] CLD 23 MLTPL
CPA5 XLD[1] [2] CLD 23 MLTPL
CPA5-LD-4040[4] [5] [6] 4" x 40" CLD 23 MLTPL
CPA6 LD[1] [2] CLD 23 MLTPL
CPA6 MAX[1] [2] CLD 23 MLTPL
CPA7[1] [2] CLD 23 MLTPL
CPA7 LD[1] [2] CLD 23 MLTPL
CPA7 MAX[1] [2] CLD 23 MLTPL
ESNA1-LF[1] [2] CLD 23 MLTPL
ESNA1-LF LD[1] [2] CLD 23 MLTPL
ESNA1-LF2[1] [2] CLD 23 MLTPL
ESNA1-LF2 LD[1] [2] CLD 23 MLTPL
ESNA4[1] [2] CLD 23 MLTPL
ESNA4-LD[13] 8" x 40" CLD 23 MLTPL
ESNA4-LF[1] [2] CLD 23 MLTPL
ESPA1[1] [2] CLD 23 MLTPL
ESPA1 8540[1] [2] CLD 23 MLTPL
ESPA1 DE[1] [2] CLD 23 MLTPL
ESPA2[1] [2] CLD 23 MLTPL
ESPA2 8540[1] [2] CLD 23 MLTPL
ESPA2 DE[1] [2] CLD 23 MLTPL
ESPA2 LD[1] [2] CLD 23 MLTPL
ESPA2 MAX[1] [2] CLD 23 MLTPL
ESPA2 XLD[1] [2] CLD 23 MLTPL
ESPA2-1640[4] [6] [7] 16" x 40" CLD 23 MLTPL
ESPA2-4040[4] [5] [6] 4" x 40" CLD 23 MLTPL
ESPA2-LD-4040[4] [5] [6] 4" x 40" CLD 23 MLTPL
ESPA3[1] [2] CLD 23 MLTPL
ESPA4[1] [2] CLD 23 MLTPL
ESPA4 LD[1] [2] CLD 23 MLTPL
ESPA4 MAX[1] [2] CLD 23 MLTPL
ESPA4-4040[4] [5] [6] 4" x 40" CLD 23 MLTPL
ESPA4-LD-4040[4] [5] [6] 4" x 40" CLD 23 MLTPL
ESPAB[1] [2] CLD 23 MLTPL
ESPAB MAX[1] [2] CLD 23 MLTPL
ESPAB-1640[4] [6] [7] 16" x 40" CLD 23 MLTPL
HYDRACoRe10-LD[1] [2] CLD 23 MLTPL
HYDRACoRe50-LD[1] [2] CLD 23 MLTPL
LFC1[1] [2] CLD 23 MLTPL
LFC1-46HP[1] [2] CLD 23 MLTPL
LFC3[1] [2] CLD 23 MLTPL
LFC3-46HP[1] [2] CLD 23 MLTPL
LFC3-LD[1] [2] CLD 23 MLTPL
PROC10[1] [2] CLD 23 MLTPL
SANRO HS-4[8] [12] 4" x 40" CLD 23 MLTPL
SANRO HS-8[9] [12] 8" x 40" CLD 23 MLTPL
SANRO HS2-4[10] [12] 4" x 40" CLD 23 MLTPL
SANRO HS2-8[11] [12] 8" x 40" CLD 23 MLTPL
SWC1[1] [2] CLD 23 MLTPL
SWC2[1] [2] CLD 23 MLTPL
SWC3[1] [2] CLD 23 MLTPL
SWC3+[1] [2] CLD 23 MLTPL
SWC4[1] [2] CLD 23 MLTPL
SWC4 B[1] [2] CLD 23 MLTPL
SWC4 LD[1] [2] CLD 23 MLTPL
SWC4 MAX[1] [2] CLD 23 MLTPL
SWC4+[1] [2] CLD 23 MLTPL
SWC4B MAX[1] [2] CLD 23 MLTPL
SWC5[1] [2] CLD 23 MLTPL
SWC5 LD[1] [2] CLD 23 MLTPL
SWC5 MAX[1] [2] CLD 23 MLTPL
SWC5-1640[4] [6] [7] 16" x 40" CLD 23 MLTPL
SWC6[1] [2] CLD 23 MLTPL
SWC6 LD[1] [2] CLD 23 MLTPL
SWC6 MAX[1] [2] CLD 23 MLTPL

[1] Certification is for a minimum flow of 2,650 liters per day, and is based on flushing
    the unit for a minimum of 30 minutes at 145-155 psi prior to being placed into service.
[2] Certification is for 8" - 8.44" diameter models only.
[3] Model CPA3-D is Certified to a minimum daily flow of 11,000 gallons per day.  CPA3-D is
    flushed at a flow rate of 7 gallons per minute for 24 hours with water that has a
    chlorine concentration <0.1ppm, a pH between 2-10, Feedwater Turbidity: 1.0 NTU Max. and
    Feedwater SDI(15 minus): 5.0 max.
[4] Size is expressed as diameter by length.
[5] 4040 Elements are Certified for a minimum daily flow of 1,600 gallons.
[6] Certification is based on flushing the unit for a minimum of 30 minutes at 8 gallons per
    minute prior to being placed into service.
[7] 1640 Elements are Certified for a minimum daily flow of 28,900 gallons.
[8] Certified for a minimum flow of 1,850 gallons per day.
[9] Certified for a minimum flow of 7,500 gallons per day.
[10] Certified for a minimum flow of 2,380 gallons per day.
[11] Certified for a minimum flow of 9,500 gallons per day.
[12] 4" models require a flush of 3 gpm for 30 minutes with Deionized water prior to use.  8"
     models require a flush of 10 gpm for 30 minutes with Deionized water prior to use.
[13] Model ESNA4-LD is certified to a minimum daily flow of 8,000 gallons per day.  ESNA4-LD
     is flushed at a flow rate of 7 gallons per minute for 30 minutes with water that has a
     chlorine concentration <0.1ppm, a pH between 2-10, Feedwater Turbidity: 1.0 NTU Max. and
     Feedwater SDI (15 minus): 5.0 max.



Facility : Shiga, Japan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Filtration Devices/Components
ESPA DHF-M flat sheet membrane[1] [2] CLD 23 OTHER
ESPA DSF-M flat sheet membrane[1] [2] CLD 23 OTHER
ESPA-DHF flat sheet membrane[1] [2] CLD 23 OTHER
ESPA-DHR flat sheet membrane[1] [2] CLD 23 OTHER
ESPA-DSF flat sheet membrane[1] [2] CLD 23 OTHER
ESPA-XF-10 flat sheet membrane[1] [2] CLD 23 OTHER

[1] Certified for a minimum daily permeate flow of 1,000 gallons.  Product requires a
    potable water flush of 10 minutes at 100 PSI, followed by 20 minutes at 70 - 100 PSI
    before use.
[2] Certified for a maximum surface area of 440 sq. ft.

Reverse Osmosis Element
CPA2-4040[3] 4" x 40" CLD 23 MLTPL
CPA3 LD[4] 8" x 40" CLD 23 MLTPL
CPA5[4] 8" x 40" CLD 23 MLTPL
CPA5 LD[4] 8" x 40" CLD 23 MLTPL
CPA5 MAX[4] 8" x 40" CLD 23 MLTPL
CPA6A-LD[4] 8" x 40" CLD 23 MLTPL
CPA7-LD[4] 8" x 40" CLD 23 MLTPL
CPA7-LD-4040[3] 4" x 40" CLD 23 MLTPL
CPA7-MAX[4] [5] 8" x 40" CLD 23 MLTPL
ESNA1-4040[3] 4" x 40" CLD 23 MLTPL
ESPA1[4] 8" x 40" CLD 23 MLTPL
ESPA2[4] 8" x 40" CLD 23 MLTPL
ESPA2 LD[4] 8" x 40" CLD 23 MLTPL
ESPA2 LD MAX[4] 8" x 40" CLD 23 MLTPL
ESPA2 MAX[4] 8" x 40" CLD 23 MLTPL
ESPA2+[4] 8" x 40" CLD 23 MLTPL
ESPA2-4040[3] 4" x 40" CLD 23 MLTPL
ESPA4[4] 8" x 40" CLD 23 MLTPL
ESPA4 LD[4] 8" x 40" CLD 23 MLTPL
ESPA4 MAX[4] 8" x 40" CLD 23 MLTPL
ESPA4-4040[3] 4" x 40" CLD 23 MLTPL
ESPAB MAX[4] 8" x 40" CLD 23 MLTPL
LFC3-LD[4] 8" x 40" CLD 23 MLTPL
LFC3-LD-4040[3] 4" x 40" CLD 23 MLTPL
PROC10[4] [5] 8" x 40" CLD 23 MLTPL
PROC30[4] [5] 8" x 40" CLD 23 MLTPL
SWC4 B[4] 8" x 40" CLD 23 MLTPL
SWC4 MAX[4] 8" x 40" CLD 23 MLTPL
SWC4+[4] 8" x 40" CLD 23 MLTPL
SWC4B MAX[4] 8" x 40" CLD 23 MLTPL
SWC4B(B)[4] 8" x 40" CLD 23 MLTPL
SWC5[4] 8" x 40" CLD 23 MLTPL
SWC5 LD[4] 8" x 40" CLD 23 MLTPL
SWC5 MAX[4] 8" x 40" CLD 23 MLTPL
SWC5-LD-4040[6] 4" x 40" CLD 23 MLTPL
SWC6[4] 8" x 40" CLD 23 MLTPL
SWC6 LD[4] 8" x 40" CLD 23 MLTPL
SWC6 MAX[4] 8" x 40" CLD 23 MLTPL

[3] Certification is for the following minimum daily permeate flow, and is based on flushing
    the unit with RO water for a minimum of 30 minutes at 36 gpm prior to being placed into
    service.
    CPA2-4040    - 1,910 gallons
    ESPA2-4040   - 1,615 gallons
    ESPA4-4040   - 2,125 gallons
    CPA7-LD-4040 - 1,955 gallons
    LFC3-LD-4040 - 1,785 gallons
    ESNA1-4040   - 1,785 gallons
[4] All models are flushed at a rate of 53 gpm for 30 minutes with RO Water.
[5] The PROC10, PROC30 and CPA7-MAX models are certified for a minimum daily flow of 9,350
    gallons per day. All other models are certified for a minimum flow of 2,650 liters per
    day.
[6] SWC5-LD-4040 is flushed at a rate of 15 gpm for 30 minutes with RO water.


Number of matching Manufacturers is 1
Number of matching Products is 118
Processing time was 0 seconds