NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=31820&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Trelleborg Sealing Solutions Plymouth LLC | |
1100 Xenium Lane North | |
Plymouth, MN 55441 | |
United States | |
800-927-1422 | |
952-927-1400 | |
Visit this company's website |
Facility : # 1 China
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials[1] |
||||
558CK | [2] | C. HOT | EPDM | |
559GT | [2] | C. HOT | EPDM | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.0 sq. in./L. [2] Certified for maximum surface area to volume ratio of 2.0 sq. in./L. |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Facility : Mason City, IA
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
O-Rings [2] |
||||
210N | [1] | CLD 23 | NBR | |
212N | [1] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified. |
Facility : Litchfield, MN
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
515CG[2] | [1] | C. HOT | PVDF | |
534DF | [1] | CLD 23 | NBR | |
534HC[2] | [1] | CLD 23 | NBR | |
536EG[11] | [4] | CLD 23 | NBR | |
558CH[3] | [4] | C. HOT | EPDM | |
558CK[2] | [1] | C. HOT | EPDM | |
558CM[2] | [1] | C. HOT | EPDM | |
558EC[3] | [4] | C. HOT | EPDM | |
559GT[2] | [1] | C. HOT | EPDM | |
559N[5] | [6] | C. HOT | EPDM | |
559PE[7] | [8] | C. HOT | EPDM | |
559TM[9] | [1] | C. HOT | EPDM | |
559YU[2] | [1] | C. HOT | EPDM | |
560CF[2] | [1] | C. HOT | EPDM | |
560RJ[10] | [6] | C. HOT | EPDM | |
560YH | [1] | C. HOT | EPDM | |
561NZ[2] | [1] | C. HOT | EPDM | |
561TX[2] | [1] | C. HOT | EPDM | |
565CZ | [1] | C. HOT | EPDM | |
574J[2] | [1] | C. HOT | HNBR | |
574TA[2] | [1] | C. HOT | HNBR | |
76155 | [1] | C. HOT | SLC | |
76156 | [1] | C. HOT | SLC | |
76157 | [1] | C. HOT | SLC | |
76187D | [1] | C. HOT | SLC | |
Quniton 560CF[2] | [1] | C. HOT | EPDM | |
Quniton(R) 558CH[3] | [4] | C. HOT | EPDM | |
Quniton[R] 558EC[3] | [4] | C. HOT | EPDM | |
Quniton[R] 559PE[7] | [8] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 2.0 sq. in./L. [3] This product was also evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 3.0 sq. in./L. [4] Certified for a maximum surface area to volume ratio of 14.0 square inches/L. [5] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 1.0 sq. in./L. [6] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L. [7] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 8 sq. in./L. [8] Certified for a maximum surface area to volume ratio of 14 sq. in./L. [9] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 4 sq. in./L. [10] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.5 sq. in./L. [11] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 4 square inches/L. |
||||
O-Rings |
||||
515CG[2] | [1] | C. HOT | PVDF | |
536EG[11] | [4] | C. HOT | NBR | |
574J[2] | [1] | C. HOT | HNBR | |
76187D | [1] | C. HOT | SLC | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 2.0 sq. in./L. [4] Certified for a maximum surface area to volume ratio of 14.0 square inches/L. [11] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 4 square inches/L. |
NOTE: Only products manufactured at an NSF authorized facility and bearing the NSF Mark are considered Certified.
Facility : Ashtabula, OH
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
558CH[1] | [2] | C. HOT | EPDM | |
558CK[3] | [4] | C. HOT | EPDM | |
558EC[1] | [2] | C. HOT | EPDM | |
559GT[3] | [4] | C. HOT | EPDM | |
559PE[5] | [2] | C. HOT | EPDM | |
[1] This product was also evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 3.0 sq. in./L. [2] Certification requested for a maximum surface area to volume ratio of 14.0 square inches/L. [3] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.0 square inches/L [4] Certification requested for a maximum surface area to volume ratio of 2.0 square inches/liter. [5] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 5.5 sq.in./L |
Facility : Guangdong, China
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
217AB[1] | [2] | C. HOT | SLC | |
76155 | [3] | C. HOT | SLC | |
76156 | [3] | C. HOT | SLC | |
76157 | [3] | C. HOT | SLC | |
[1] This product has been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 4.0 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L. [3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. |
Facility : Jiangsu, China
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
366SM | [1] | C. HOT | NBR | |
515CG[2] | [1] | C. HOT | PVDF | |
534HC[2] | [1] | CLD 23 | NBR | |
536EG[3] | [4] | CLD 23 | NBR | |
557WE[5] | [6] | C. HOT | EPDM | |
557WG[5] | [6] | C. HOT | EPDM | |
557WM[5] | [6] | C. HOT | EPDM | |
558CH[7] | [4] | C. HOT | EPDM | |
558CK[2] | [1] | C. HOT | EPDM | |
558CM[2] | [1] | C. HOT | EPDM | |
558EC[7] | [4] | C. HOT | EPDM | |
559GT[2] | [1] | C. HOT | EPDM | |
559N[8] | [9] | C. HOT | EPDM | |
559PE[7] | [4] | C. HOT | EPDM | |
559TM[3] | [1] | C. HOT | EPDM | |
559YU[2] | [1] | C. HOT | EPDM | |
560CF[2] | [1] | C. HOT | EPDM | |
560RJ[10] | [9] | C. HOT | EPDM | |
560YH | [1] | C. HOT | EPDM | |
561NZ[2] | [1] | C. HOT | EPDM | |
561TX[2] | [1] | C. HOT | EPDM | |
565CZ | [1] | C. HOT | EPDM | |
71105B[2] | [1] | CLD 23 | SLC | |
76155 | [1] | C. HOT | SLC | |
76156 | [1] | C. HOT | SLC | |
76157 | [1] | C. HOT | SLC | |
862KA[4] | [7] | C. HOT | EPDM | |
Quniton[R] 559PE[7] | [4] | C. HOT | EPDM | |
Quniton[R] 560CF[2] | [1] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.0 sq. in./L. [3] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 3.63 sq. in./L. [4] Certified for a maximum surface area to volume ratio of 14.0 sq. in./L. [5] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 10 square inches/L. [6] Certified for a maximum surface area to volume ratio of 10 square inches/L. [7] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 8.0 sq. in./L. [8] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 1.0 sq. in./L. [9] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L. [10] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.5 sq. in./L. |
||||
O-Rings |
||||
515CG[2] | [1] | C. HOT | PVDF | |
536EG[3] | [4] | CLD 23 | NBR | |
557WE[5] | [6] | C. HOT | EPDM | |
557WG[5] | [6] | C. HOT | EPDM | |
557WM[5] | [6] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.0 sq. in./L. [3] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 3.63 sq. in./L. [4] Certified for a maximum surface area to volume ratio of 14.0 sq. in./L. [5] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 10 square inches/L. [6] Certified for a maximum surface area to volume ratio of 10 square inches/L. |
Facility : Reynosa, Tamaulipas, Mexico
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
366SM | [1] | C. HOT | NBR | |
515CG[2] | [1] | C. HOT | PVDF | |
534DF | [1] | CLD 23 | NBR | |
534HC[2] | [1] | CLD 23 | NBR | |
536EG[3] | [4] | CLD 23 | NBR | |
557WE[5] | [6] | C. HOT | EPDM | |
557WG[5] | [6] | C. HOT | EPDM | |
557WM[5] | [6] | C. HOT | EPDM | |
558BM | [1] | CLD 23 | EPDM | |
558CH[3] | [4] | C. HOT | EPDM | |
558CK[2] | [1] | C. HOT | EPDM | |
558CM[2] | [1] | C. HOT | EPDM | |
558EC[3] | [4] | C. HOT | EPDM | |
559GT[2] | [1] | C. HOT | EPDM | |
559N[7] | [8] | C. HOT | EPDM | |
559PE[2] | [4] | C. HOT | EPDM | |
559TM[2] | [1] | C. HOT | EPDM | |
559YU[2] | [1] | C. HOT | EPDM | |
560CF[2] | [1] | C. HOT | EPDM | |
560RJ[9] | [8] | C. HOT | EPDM | |
560YH | [1] | C. HOT | EPDM | |
561NZ[2] | [1] | C. HOT | EPDM | |
561TX[2] | [1] | C. HOT | EPDM | |
565CZ | C. HOT | EPDM | ||
71105B[2] | [1] | CLD 23 | SLC | |
912V[11] | [10] | C. HOT | EPDM | |
Quniton[R] 558CH[3] | [4] | C. HOT | EPDM | |
Quniton[R] 558EC[3] | [4] | C. HOT | EPDM | |
Quniton[R] 559PE[2] | [4] | C. HOT | EPDM | |
Quniton[R] 560CF[2] | [1] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.0 sq. in./L. [3] This product was also evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 4.0 sq. in./L. [4] Certified for a maximum surface area to volume ratio of 14.0 sq. in./L. [5] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 10 square inches/L. [6] Certified for a maximum surface area to volume ratio of 10 square inches/L. [7] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 1.0 sq. in./L. [8] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L. [9] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.5 sq. in./L. [10] Certified for a maximum surface area to volume ratio of 5.0 square inches/L. [11] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 5.0 square inches/L. |
||||
O-Rings |
||||
515CG[2] | [1] | C. HOT | PVDF | |
536EG[3] | [4] | C. HOT | NBR | |
557WE[5] | [6] | C. HOT | EPDM | |
557WG[5] | [6] | C. HOT | EPDM | |
557WM[5] | [6] | C. HOT | EPDM | |
912V[11] | [10] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.0 sq. in./L. [3] This product was also evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 4.0 sq. in./L. [4] Certified for a maximum surface area to volume ratio of 14.0 sq. in./L. [5] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 10 square inches/L. [6] Certified for a maximum surface area to volume ratio of 10 square inches/L. [10] Certified for a maximum surface area to volume ratio of 5.0 square inches/L. [11] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 5.0 square inches/L. |
NOTE: Only products manufactured at an NSF authorized facility and bearing the NSF Mark are considered Certified.
Number of matching Manufacturers is 1
Number of matching Products is 116
Processing time was 0 seconds