NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=33160&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Hutchinson Seal de Mexico S.A. de C.V. 
National O-Ring Division
Calle Pelicanos 313 
Col. Lomas de San Fernando, Ensenada 
Baja California C.P. 22785,  
Mexico 
52 646 152 2900


Facility : Ensenada Baja California, Mexico

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
D31 NBR [1] CLD 23 NBR
E08 EPDM [1] C. HOT EPDM
E09 EPDM [1] C. HOT EPDM
E14 EPDM [2] C. HOT EPDM
E16 EPDM [2] C. HOT EPDM
E20 EPDM [1] C. HOT EPDM
E37 EPDM [1] C. HOT EPDM
O-Rings and Molded Shapes [1] CLD 23 NBR 

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.5 sq. in./L.

O-Rings
D31 NBR [1] CLD 23 NBR
O-Rings and Molded Shapes [1] CLD 23 NBR 

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.


Mechanical Plumbing Devices

Trade Designation      

Gasket/Sealing Materials[1]
E08 EPDM[2]      
E09 EPDM[2]      
E20[2]      
E37 EPDM[2]      
EPDM Compound E14[2]      
EPDM Compound E16[2]       

[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.


[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

Number of matching Manufacturers is 1
Number of matching Products is 16
Processing time was 0 seconds