NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=39770&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Romac Industries, Inc. | |
| 21919 20th Avenue S.E. | |
| Suite 100 | |
| Bothell, WA 98021-4404 | |
| United States | |
| 425-951-6200 | |
| Visit this company's website |
Facility : Goodyear, AZ
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Couplings |
||||
| Alpha Flanged Coupling Adapter | >= 4" | CLD 23 | MLTPL | |
| Alpha Restraint Joint | >= 4" | CLD 23 | MLTPL | |
| Alpha Wide Range End Cap Coupling | >= 4" | CLD 23 | MLTPL | |
| Alpha Wide Range Restraint Coupling | >= 4" | CLD 23 | MLTPL | |
| Macro HP FCA (Flanged Coupling Adapter) | >= 4" | CLD 23 | MLTPL | |
| Macro HP Two Bolt Coupling | >= 2" | CLD 23 | MLTPL | |
|
Fittings |
||||
| Alpha Elbow Fittings | >= 4" | CLD 23 | MLTPL | |
| Alpha Tee Fittings | >= 6" | CLD 23 | MLTPL | |
Facility : Dallas, NC
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Tapping Sleeves/Service Saddles [G] |
||||
| 101N-H Service Saddle with Nylon coating for HDPE Pipe[1] | >= 2" | CLD 23 | MLTPL | |
| 101NS Service Saddle with Nylon coating[1] | >= 1 1/2" | CLD 23 | MLTPL | |
| 101NU Service Saddle with Nylon coating[1] | 4" - 16" | CLD 23 | MLTPL | |
| 202N-H Service Saddle with Nylon coating for HDPE Pipe[1] | >= 2" | CLD 23 | MLTPL | |
| 202NS Service Saddle with Nylon coating[1] | >= 2" | CLD 23 | MLTPL | |
| 202NU Service Saddle with Nylon coating[1] [2] | >= 2" | CLD 23 | MLTPL | |
| 304 Stainless Steel Service Saddle[1] | >= 2" | CLD 23 | MLTPL | |
| 305 Stainless Steel Service Saddle[1] | >= 10" | CLD 23 | MLTPL | |
| 305-H Stainless Steel Service Saddle for HDPE Pipe[1] | >= 10" | CLD 23 | MLTPL | |
| 306 Stainless Steel Service Saddle[1] | >= 2" | CLD 23 | MLTPL | |
| 306-H Stainless Steel Service Saddle for HDPE Pipe[1] | >= 2" | CLD 23 | MLTPL | |
| FTS419 Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS419-MJ Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS419-T Fabricated Steel Tapping Saddle | >= 4" | CLD 23 | MLTPL | |
| FTS420 Fabricated Steel Tapping Sleeve | >= 6" | CLD 23 | MLTPL | |
| FTS420 Fabricated Steel Tapping Sleeve | >= 3" | CLD 23 | MLTPL | |
| FTS420-MJ Fabricated Steel Tapping Sleeve | >= 6" | CLD 23 | MLTPL | |
| FTS420-T Fabricated Steel Tapping Saddle | >= 6" | CLD 23 | MLTPL | |
| FTS421 Fabricated Steel Tapping Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS421-T Fabricated Steel Tapping Saddle for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS422 Fabricated Steel Tapping Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS422-T Fabricated Steel Tapping Saddle for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS423-H Fabricated Steel Tapping Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| FTS423-MJ Fabricated Steel Repair Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| FTS423-T Fabricated Steel Repair Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| FTS425 Fabricated Steel Tapping Split Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS425II Fabricated Steel Tapping Split Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS435 Fabricated Steel Tapping Sleeve for Concrete Steel Cylinder Pipe | >= 12" | CLD 23 | MLTPL | |
| FTS445 Fabricated Steel Tapping Sleeve for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
| FTS445-T Fabricated Steel Tapped Sleeve for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
| FTS465 Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS465-T Fabricated Steel Tapping Saddle | >= 4" | CLD 23 | MLTPL | |
| SST III Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| SST III-MJ Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| SST Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| SST-H Stainless Steel Tapping Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| SST-MJ Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS419 Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS419-MJ Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS419-T Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS420 Stainless Steel Tapping Sleeve | >= 6" | CLD 23 | MLTPL | |
| STS420-MJ Stainless Steel Tapping Sleeve | >= 6" | CLD 23 | MLTPL | |
| STS420-T Stainless Steel Tapping Saddle | >= 6" | CLD 23 | MLTPL | |
| STS421 Stainless Steel Tapping Sleeve for High Pressure Applications | >= 6" | CLD 23 | MLTPL | |
| STS421-T Stainless Steel Tapping Saddle for High Pressure Applications | >= 6" | CLD 23 | MLTPL | |
| STS422 Stainless Steel Tapping Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| STS422-T Stainless Steel Tapping Saddle for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| STS423 Stainless Steel Tapping Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| STS423-MJ Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS423-T Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS445 Stainless Steel Tapping Sleeve for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
| STS445-T Stainless Steel Tapping Saddle for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
[1] The service saddles accommodate from 1 1/2" - 30" diameter pipe and have from 1/2" - 3"
outlets, depending on model.
[2] The trade name "202NU Service Saddle with Nylon coating" is also identified as "202 NU -
OD Size x Tap Size & Type OD RANGE Min Pipe Size - Max Pipe Size" on product labels.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Repair Clamps or Couplings[1] [G] |
||||
| 501 Straight Coupling | >= 2" | CLD 23 | MLTPL | |
| CL1 Cast Lug Repair Clamp | >= 2" | CLD 23 | MLTPL | |
| CL2 Cast Lug Repair Clamp | >= 4" | CLD 23 | MLTPL | |
| CL3 Cast Lug Repair Clamp | >= 10" | CLD 23 | MLTPL | |
| EC501 End Cap Coupling | >= 4" | CLD 23 | MLTPL | |
| RC501 Reducing Coupling | >= 3" | CLD 23 | MLTPL | |
| XR501 Extended Range Coupling | >= 4" | CLD 23 | MLTPL | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Fort Worth, TX
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Tapping Sleeves/Service Saddles[1] [G] |
||||
| FTS419 Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS419-MJ Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS419-T Fabricated Steel Tapping Saddle | >= 4" | CLD 23 | MLTPL | |
| FTS420 Fabricated Steel Tapping Sleeve | >= 3" | CLD 23 | MLTPL | |
| FTS420-MJ Fabricated Steel Tapping Sleeve | >= 6" | CLD 23 | MLTPL | |
| FTS420-T Fabricated Steel Tapping Saddle | >= 6" | CLD 23 | MLTPL | |
| FTS421 Fabricated Steel Tapping Sleeve for High Pressure Applications | >= 6" | CLD 23 | MLTPL | |
| FTS421-T Fabricated Steel Tapping Saddle for High Pressure Applications | >= 6" | CLD 23 | MLTPL | |
| FTS422 Fabricated Steel Tapping Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS422-T Fabricated Steel Tapping Saddle for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS423-H Fabricated Steel Tapping Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| FTS423-MJ Fabricated Steel Repair Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| FTS423-T Fabricated Steel Repair Sleeve with Tapped Outlet for HDPE | >= 4" | CLD 23 | MLTPL | |
| FTS425 Fabricated Steel Tapping Split Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS425II Fabricated Steel Tapping Split Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS435 Fabricated Steel Tapping Sleeve for Concrete Steel Cylinder Pipe | >= 12" | CLD 23 | MLTPL | |
| FTS445 Fabricated Steel Tapping Sleeve for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
| FTS445-T Fabricated Steel Tapped Sleeve for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
| FTS465 Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS465-T Fabricated Steel Tapping Saddle | >= 4" | CLD 23 | MLTPL | |
| SST III Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| SST III-MJ Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| SST Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| SST-H Stainless Steel Tapping Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| SST-MJ Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS419 Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS419-MJ Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS419-T Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS420 Stainless Steel Tapping Sleeve | >= 6" | CLD 23 | MLTPL | |
| STS420-MJ Stainless Steel Tapping Sleeve | >= 6" | CLD 23 | MLTPL | |
| STS420-T Stainless Steel Tapping Saddle | >= 6" | CLD 23 | MLTPL | |
| STS421 Stainless Steel Tapping Sleeve for High Pressure Applications | >= 6" | CLD 23 | MLTPL | |
| STS421-T Stainless Steel Tapping Saddle for High Pressure Applications | >= 6" | CLD 23 | MLTPL | |
| STS422 Stainless Steel Tapping Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| STS422-T Stainless Steel Tapping Saddle for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| STS423 Stainless Steel Tapping Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| STS423-MJ Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS423-T Stainless Steel Tapping Sleeve with Tapped Outlet | >= 4" | CLD 23 | MLTPL | |
| STS445 Stainless Steel Tapping Sleeve for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
| STS445-T Stainless Steel Tapping Saddle for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
[1] These tapping sleeves can accommodate from 4" - 96" diameter pipe and a 3" - 42" branch
outlet.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Couplings[1] [G] |
||||
| 501 Straight Coupling | >= 2" | CLD 23 | MLTPL | |
| EC501 End Cap Coupling | >= 4" | CLD 23 | MLTPL | |
| RC501 Reducing Coupling | >= 3" | CLD 23 | MLTPL | |
| XR501 Extended Range Coupling | >= 4" | CLD 23 | MLTPL | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Bothell, WA
Joining and Sealing Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Gasket/Sealing Materials [G] |
||||
| 9RST-E80-ORM | [1] | CLD 23 | EPDM | |
| 9RST-N2-2 | [2] | CLD 23 | NBR | |
| 9RST-N3-3 | [3] | CLD 23 | NBR | |
| 9RST-S55-ORM | [4] | CLD 23 | SBR | |
| 9RST-S60-ORM | [5] | CLD 23 | SBR | |
| 9RST-S65 | >= 4" | CLD 23 | SBR | |
| 9RST-S65-ORM | [5] | CLD 23 | SBR | |
| 9RST-S70-ORM | [5] | CLD 23 | SBR | |
| 9RST-S75-ORM | [5] | CLD 23 | SBR | |
| 9RST-S80-ORM | [5] | CLD 23 | SBR | |
| A/C Common Groove Transition Gasket | [2] | CLD 23 | NBR | |
| MJ Gasket | [3] | CLD 23 | NBR | |
| Mat Gasket | [2] | CLD 23 | NBR | |
| Piranha Restraint Gasket | [3] | CLD 23 | NBR | |
| Piranha Restraint Gasket | >= 4" | CLD 23 | SBR | |
| Piranha Restraint Gasket (Dual Durometer) | [3] | CLD 23 | NBR | |
| Tapping Flange Gasket | [3] | CLD 23 | NBR | |
| Threaded Flange Gasket | [3] | CLD 23 | NBR | |
[1] Certified for a maximum surface area to volume ratio of 4.6 sq. in./L in couplings < 4"
and 0.65 sq. in./L in couplings 4" and greater.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.5 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 4.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 1.0 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
|
O-Rings [G] |
||||
| 9RST-E80-ORM | [1] | CLD 23 | EPDM | |
| 9RST-N3-3 | [3] | CLD 23 | NBR | |
| 9RST-S55-ORM | [5] | CLD 23 | SBR | |
| 9RST-S60-ORM | [5] | CLD 23 | SBR | |
| 9RST-S65-ORM | [5] | CLD 23 | SBR | |
| 9RST-S70-ORM | [5] | CLD 23 | SBR | |
| 9RST-S75-ORM | [5] | CLD 23 | SBR | |
| 9RST-S80-ORM | [5] | CLD 23 | SBR | |
[1] Certified for a maximum surface area to volume ratio of 4.6 sq. in./L in couplings < 4"
and 0.65 sq. in./L in couplings 4" and greater.
[3] Certified for a maximum surface area to volume ratio of 2.5 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 1.0 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Tapping Sleeves/Service Saddles [G] |
||||
| 101N-H Service Saddle with Nylon coating for HDPE pipe[1] | >= 2" | CLD 23 | MLTPL | |
| 101NS Service Saddle with Nylon coating[1] | >= 1 1/2" | CLD 23 | MLTPL | |
| 101NU Service Saddle with Nylon coating[1] | 4" - 16" | CLD 23 | MLTPL | |
| 202N-H Service Saddle with Nylon coating for HDPE pipe[1] | >= 2" | CLD 23 | MLTPL | |
| 202NS Service Saddle with Nylon coating[1] | >= 2" | CLD 23 | MLTPL | |
| 202NU Service Saddle with Nylon coating[1] [2] | >= 2" | CLD 23 | MLTPL | |
| 304 Stainless Steel Service Saddle[1] | >= 2" | CLD 23 | MLTPL | |
| 305 Stainless Steel Service Saddle[1] | >= 10" | CLD 23 | MLTPL | |
| 305-H Stainless Steel Service Saddle for HDPE Pipe[1] | >= 10" | CLD 23 | MLTPL | |
| 306 Stainless Steel Service Saddle[1] | >= 2" | CLD 23 | MLTPL | |
| 306-H Stainless Steel Service Saddle for HDPE Pipe[1] | >= 2" | CLD 23 | MLTPL | |
| FTS419 Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS419-MJ Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS419-T Fabricated Steel Tapping Saddle | >= 4" | CLD 23 | MLTPL | |
| FTS420 Fabricated Steel Tapping Sleeve | >= 6" | CLD 23 | MLTPL | |
| FTS420-MJ Fabricated Steel Tapping Sleeve | >= 6" | CLD 23 | MLTPL | |
| FTS420-T Fabricated Steel Tapping Saddle | >= 6" | CLD 23 | MLTPL | |
| FTS421 Fabricated Steel Tapping Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS421-T Fabricated Steel Tapping Saddle for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS422 Fabricated Steel Tapping Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS422-T Fabricated Steel Tapping Saddle for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS423-H Fabricated Steel Tapping Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| FTS423-MJ Fabricated Steel Repair Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| FTS423-T Fabricated Steel Repair Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| FTS425 Fabricated Steel Tapping Split Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS425II Fabricated Steel Tapping Split Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FTS435 Fabricated Steel Tapping Sleeve for Concrete Steel Cylinder Pipe | >= 12" | CLD 23 | MLTPL | |
| FTS445 Fabricated Steel Tapping Sleeve for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
| FTS445-T Fabricated Steel Tapped Sleeve for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
| FTS465 Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| FTS465-T Fabricated Steel Tapping Saddle | >= 4" | CLD 23 | MLTPL | |
| SST III Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| SST III-MJ Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| SST Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| SST-H Stainless Steel Tapping Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| SST-MJ Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS419 Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS419-MJ Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS419-T Fabricated Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS420 Stainless Steel Tapping Sleeve | >= 6" | CLD 23 | MLTPL | |
| STS420-MJ Stainless Steel Tapping Sleeve | >= 6" | CLD 23 | MLTPL | |
| STS420-T Stainless Steel Tapping Saddle | >= 6" | CLD 23 | MLTPL | |
| STS421 Stainless Steel Tapping Sleeve for High Pressure Applications | >= 6" | CLD 23 | MLTPL | |
| STS421-T Stainless Steel Tapping Saddle for High Pressure Applications | >= 6" | CLD 23 | MLTPL | |
| STS422 Stainless Steel Tapping Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| STS422-T Stainless Steel Tapping Saddle for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| STS423 Stainless Steel Tapping Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| STS423-MJ Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS423-T Stainless Steel Tapping Sleeve | >= 4" | CLD 23 | MLTPL | |
| STS445 Stainless Steel Tapping Sleeve for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
| STS445-T Stainless Steel Tapping Saddle for Weld-on Outlets | >= 4" | CLD 23 | MLTPL | |
[1] The service saddles accommodate from 1 1/2" - 30" diameter pipe and have from 1/2" - 3"
outlets, depending on model.
[2] The trade name "202NU Service Saddle with Nylon coating" is also identified as "202 NU -
OD Size x Tap Size & Type OD RANGE Min Pipe Size - Max Pipe Size" on product labels.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Couplings[G] |
||||
| 400 RG Restrained Coupling | >= 12" | CLD 23 | MLTPL | |
| 400 RG-PVC Restrained Coupling | >= 12" | CLD 23 | MLTPL | |
| Alpha Flanged Coupling Adapter | >= 4" | CLD 23 | MLTPL | |
| Alpha Restraint Joint | >= 4" | CLD 23 | MLTPL | |
| Alpha Wide Range End Cap Coupling | >= 4" | CLD 23 | MLTPL | |
| Alpha Wide Range Restraint Coupling | >= 4" | CLD 23 | MLTPL | |
| FC400 Fabricated Steel Flange Coupling Adapter | >= 12" | CLD 23 | MLTPL | |
| FJ Restraint Flexible Expansion Joint | 3" - 12" | CLD 23 | MLTPL | |
| Macro HP FCA (Flanged Coupling Adapter) | >= 4" | CLD 23 | MLTPL | |
| Macro HP Two Bolt Coupling | >= 2" | CLD 23 | MLTPL | |
| RC400 Fabricated Steel Reducing Coupling | >= 14" | CLD 23 | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
|
Fittings[G] |
||||
| GripRing Pipe Restraint | >= 4" | CLD 23 | MLTPL | |
| Piranha Restraint Gasket | >= 4" | CLD 23 | MLTPL | |
| Romac Field Flange | >= 4" | CLD 23 | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
|
Repair Clamps or Couplings[1] [G] |
||||
| 400 Fabricated Steel Coupling | >= 12" | CLD 23 | MLTPL | |
| 416 Bell Joint Leak Clamp | >= 12" | CLD 23 | MLTPL | |
| 418 Bell Joint Leak Clamp | >= 12" | CLD 23 | MLTPL | |
| 501 Long Barrel Coupling | >= 2" | CLD 23 | MLTPL | |
| 501 Straight Coupling | >= 2" | CLD 23 | MLTPL | |
| 501 Transition Coupling | >= 2" | CLD 23 | MLTPL | |
| 511 Coupling | >= 1/2" | CLD 23 | MLTPL | |
| 516 Bell Joint Leak Clamp | >= 4" | CLD 23 | MLTPL | |
| 517 Bell Joint Leak Clamp | >= 4" | CLD 23 | MLTPL | |
| C Stainless Steel Repair Clamp | >= 1/2" | CLD 23 | MLTPL | |
| CC Stainless Steel Double Section Repair Clamp | >= 10" | CLD 23 | MLTPL | |
| CLC Collar Leak Clamp | >= 2" | CLD 23 | MLTPL | |
| DJ400 Dismantling Joint | >= 3" | CLD 23 | MLTPL | |
| DJ405 Dismantling Joint | >= 3" | CLD 23 | MLTPL | |
| EC501 End Cap Coupling | >= 4" | CLD 23 | MLTPL | |
| ECF400 Equipment Connection Fitting | >= 4" | CLD 23 | MLTPL | |
| EJ401 Expansion Joint | >= 3" | CLD 23 | MLTPL | |
| EJ403 Expansion Joint | >= 3" | CLD 23 | MLTPL | |
| FCA501 Flange Coupling Adapter | >= 3" | CLD 23 | MLTPL | |
| FCG Flanged Coupling Adapter | >= 3" | CLD 23 | MLTPL | |
| FS419 Fabricated Steel Repair Sleeve | >= 3" | CLD 23 | MLTPL | |
| FS420 Fabricated Steel Repair Sleeve | >= 3" | CLD 23 | MLTPL | |
| FS421 Fabricated Steel Repair Sleeve for High Pressure Applications | >= 6" | CLD 23 | MLTPL | |
| FS422 Fabricated Steel Repair Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| FS423-H Fabricated Steel Repair Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| FS425 Fabricated Steel Repair Split Sleeve | >= 4" | CLD 23 | MLTPL | |
| FS425II Fabricated Steel Repair Split Sleeve | >= 4" | CLD 23 | MLTPL | |
| FS425S Fabricated Steel Repair Split Sleeve | >= 4" | CLD 23 | MLTPL | |
| FS435 Fabricated Steel Repair Sleeve for Concrete Steel Cylinder Pipe | >= 12" | CLD 23 | MLTPL | |
| RC501 Reducing Coupling | >= 3" | CLD 23 | MLTPL | |
| RFCA PVC Restrained Flanged Coupling Adapter for PVC | >= 3" | CLD 23 | MLTPL | |
| RFCA Restrained Flanged Coupling Adapter | >= 3" | CLD 23 | MLTPL | |
| SC Stainless Steel Repair Clamp | >= 1/2" | CLD 23 | MLTPL | |
| SCC Stainless Steel Repair Clamp | >= 1/2" | CLD 23 | MLTPL | |
| SCS Stainless Steel Repair Clamp | >= 1/2" | CLD 23 | MLTPL | |
| SL1 Stainless Steel Repair Clamp | >= 4" | CLD 23 | MLTPL | |
| SL2 Stainless Steel Repair Clamp | >= 4" | CLD 23 | MLTPL | |
| SS1 Stainless Steel Repair Clamp | >= 2" | CLD 23 | MLTPL | |
| SS1-H Stainless Steel Repair Clamp for HDPE Pipe | >= 2" | CLD 23 | MLTPL | |
| SS2 Stainless Steel Repair Clamp | >= 4" | CLD 23 | MLTPL | |
| SS2-H Stainless Steel Repair Clamp for HDPE Pipe | >= 4" | CLD 23 | MLTPL | |
| SS3 Stainless Steel Repair Clamp | >= 10" | CLD 23 | MLTPL | |
| SS3-H Stainless Steel Repair Clamp for HDPE Pipe | >= 10" | CLD 23 | MLTPL | |
| SS419 Stainless Steel Repair Sleeve | >= 3" | CLD 23 | MLTPL | |
| SS420 Stainless Steel Repair Sleeve | >= 3" | CLD 23 | MLTPL | |
| SS421 Stainless Steel Repair Sleeve for High Pressure Application | >= 6" | CLD 23 | MLTPL | |
| SS422 Stainless Steel Repair Sleeve for High Pressure Applications | >= 4" | CLD 23 | MLTPL | |
| SS423-H Stainless Steel Repair Sleeve for HDPE | >= 4" | CLD 23 | MLTPL | |
| TC400 Fabricated Steel Transition Coupling | >= 12" | CLD 23 | MLTPL | |
| The Romac A/CME Repair Band | >= 4" | CLD 23 | MLTPL | |
| XR501 Extended Range Coupling | >= 4" | CLD 23 | MLTPL | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Sultan, WA
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Couplings[G] |
||||
| Alpha Flanged Coupling Adapter | >= 4" | CLD 23 | MLTPL | |
| Alpha Wide Range End Cap Coupling | >= 4" | CLD 23 | MLTPL | |
| Alpha Wide Range Restraint Coupling | >= 4" | CLD 23 | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
|
Fittings[G] |
||||
| Alpha Elbow Fittings | >= 4" | CLD 23 | MLTPL | |
| Alpha Tee Fittings | >= 6" | CLD 23 | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 258
Processing time was 0 seconds
