NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=3B450&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
BodeDynamic GmbH 
Kirchweg 114
24558 Henstedt-Ulzburg 
Germany 
49 419 3982 0
Visit this company's website


Facility : A China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
70EP101p[1] [2] C. HOT EPDM
70EP111p[3] [2] C. HOT EPDM
70EP124p[1] [2] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.

O-Rings
70EP101p[1] [2] C. HOT EPDM
70EP111p[3] [2] C. HOT EPDM
70EP124p[1] [2] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.



Facility : B China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials[1]
70EP101p [2] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

O-Rings[1]
70EP101p [2] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.



Facility : E China

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
70EP101p[1] [2] C. HOT EPDM
70EP111p[3] [2] C. HOT EPDM
70EP124p[4] [2] C. HOT EPDM
70EP133P[5] [2] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.1 sq. in./L.
    
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.7 sq. in./L.

O-Rings
70EP101p[1] [2] C. HOT EPDM
70EP111p[3] [2] C. HOT EPDM
70EP124p[4] [2] C. HOT EPDM
70EP133P[5] [2] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.1 sq. in./L.
    
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.7 sq. in./L.



Facility : Plant G Thailand

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
70EP101p[1] [2] C. HOT EPDM
70EP111p[3] [4] [2] C. HOT EPDM
70EP144p[1] [5] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[4] his product has also been evaluated with the use of a lubricant, Mountfit SAGB 4025.
[5] Certified for a maximum surface area to volume ratio of 6.0 square inches/L.

O-Rings
70EP101p[1] [2] C. HOT EPDM
70EP111p[3] [4] [2] C. HOT EPDM 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.5 sq. in./L.
[4] his product has also been evaluated with the use of a lubricant, Mountfit SAGB 4025.

Number of matching Manufacturers is 1
Number of matching Products is 21
Processing time was 0 seconds