NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=3X610&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Georg Fischer Central Plastics LLC | |
39605 Independence | |
Shawnee, OK 74801 | |
United States | |
800-654-3872 | |
405-273-6302 | |
Visit this company's website |
Facility : Shawnee, OK
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Service Saddles [G] |
||||
+GF+ | [1] | CLD 23 | MLTPL | |
Central | [1] | CLD 23 | MLTPL | |
[1] Certification includes the following products and sizes: Conventional Branch Saddle (Large Rectangular Base): 2" - 48" main x 1/2" - 24" outlet Conventional Branch Saddle (Round Base): 2" - 48" main x 1/2" - 24" outlet Conventional Branch Saddle (Rectangular Base): 2" - 48" main x 1/2" - 24" outlet Electrofusion Branch Saddle (IPS Butt outlet): 6" - 48" main x 6" - 8" outlet Electrofusion Branch Saddle (Under-Clamp Type Wide-Body): 2" - 48" main x 2" - 8" outlet Electrofusion Transition Saddle: 2" - 12" main x 1/2" - 2" threaded outlet [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
Tapping Tee [G] |
||||
+GF+ | [2] | CLD 23 | MLTPL | |
Central | [2] | CLD 23 | MLTPL | |
[2] Certification includes the following products and sizes: Conventional Tapping Tee: 1 1/4" - 12" main x 1/2" - 1 1/4" outlet Conventional High Volume (HV) Tapping Tee: 2" - 12" main x 1 1/4" - 2" outlet Electrofusion High Volume (HV) Tapping Tee: 2" - 12" main x 1 1/4" - 2" outlet Electrofusion Tapping Tee: 1 1/4" - 12" main x 1/2" - 1 1/4" outlet [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings |
||||
+GF+ | 1/2" - 24" | CLD 23 | HDPE | |
Central[1] [G] | 1/2" - 24" | CLD 23 | HDPE | |
Design-Flow DIPS 22.5° 2 Segment Elbow Fabricated (1/16" Bend)[2] [G] | 4" - 30" | CLD 23 | PE | |
Design-Flow DIPS 45° 2 Segment Elbow Fabricated (1/16" Bend)[2] [G] | 4" - 30" | CLD 23 | PE | |
Design-Flow DIPS 45° 3 Segment Elbow Fabricated (1/8 Bend)[2] [G] | 4" - 30" | CLD 23 | PE | |
Design-Flow DIPS 90° 3 Segment Elbow Fabricated (1/4 Bend)[2] [G] | 4" - 30" | CLD 23 | PE | |
Design-Flow DIPS 90° 5 Segment Elbow Fabricated (1/4 Bend)[2] [G] | 4" - 30" | CLD 23 | PE | |
Design-Flow DIPS Fabricated 45° Lateral Wye Unreinforced[2] [G] | 4" - 30" | CLD 23 | PE | |
Design-Flow Fabricated Line Cross - DIPS[2] [G] | 4" - 30" | CLD 23 | PE | |
Design-Flow Fabricated Line Cross - IPS[2] [G] | 2" - 54" | CLD 23 | PE | |
Design-Flow Hydrant Tee / Swivel Tee[2] [G] | 6" | CLD 23 | PE | |
Design-Flow IPS 22.5° 2 Segment Elbow Fabricated (1/16" Bend)[2] [G] | 2" - 54" | CLD 23 | PE | |
Design-Flow IPS 45° 2 Segment Elbow Fabricated (1/8 Bend)[2] [G] | 4" - 54" | CLD 23 | PE | |
Design-Flow IPS 45° 3 Segment Elbow Fabricated (1/8 Bend)[2] [G] | 2" - 54" | CLD 23 | PE | |
Design-Flow IPS 90° 3 Segment Elbow Fabricated (1/4 Bend)[2] [G] | 4" - 54" | CLD 23 | PE | |
Design-Flow IPS 90° 5 Segment Elbow Fabricated (1/4 Bend)[2] [G] | 2" - 54" | CLD 23 | PE | |
Design-Flow IPS Fabricated 45° Lateral Wye Unreinforced[2] [G] | 2" - 54" | CLD 23 | PE | |
Design-Flow IPS Fabricated True Equal Wye Unreinforced[2] [G] | 4" - 24" | CLD 23 | PE | |
Design-Flow Parallel Tee[2] [G] | 6" | CLD 23 | PE | |
Desing-Flow DIPS Fabricated Line Tee[2] [G] | 4" - 30" | CLD 23 | PE | |
Desing-Flow IPS Fabricated Line Tee[2] [G] | 4" - 54" | CLD 23 | PE | |
[1] Certification includes Polyethylene Butt Fusion Fittings and Polyethylene Electrofusion Fittings. [2] Design-Flow trade name may be followed by a suffix of #341-351, #353-#355. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Schaffhausen, Switzerland
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1] [G] |
||||
Central | 14" - 24" | CLD 23 | HDPE | |
+GF+ | 14" - 24" | CLD 23 | HDPE | |
[1] Certification includes Polyethylene Butt Fusion Fittings 45° Elbow, 90° Elbow, End Caps, Tees, Flange Adapter/Stub Ends, Reducer, and MJ Adapters and Polyethylene Electrofusion Fittings couplings. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Number of matching Manufacturers is 1
Number of matching Products is 27
Processing time was 0 seconds