NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=40940&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Neptune Technology Group, Inc. | |
| 1600 Alabama Highway 229 | |
| Tallassee, AL 36078 | |
| United States | |
| 334-283-7321 |
Facility : Tallassee, AL
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Water Meters[1] [G] |
||||
| Mach10 EU1XXXXB1X[2] | .625" - 1" | CLD 23 | MLTPL | |
| Mach10 EU1XXXXB2X[2] | .625" - 1" | CLD 23 | MLTPL | |
| Neptune Aquity Meter | 5/8" - 2" | CLD 23 | MLTPL | |
| Neptune HP Tru/Flo Compound Meters | 2" | CLD 23 | MLTPL | |
| Neptune HP Turbine Meters | 1.5" - 2" | CLD 23 | MLTPL | |
| Neptune HP Turbine Meters | 3" - 10" | CLD 23 | MLTPL | |
| Neptune MACH 10[3] | 5/8" - 12" | CLD 23 | MLTPL | |
| Neptune Strainers | 1.5" - 10" | CLD 23 | MLTPL | |
| Neptune T-10 Meters | 5/8" - 2" | CLD 23 | MLTPL | |
| Neptune Tru/Flo Compound Meters | 3" - 6" | CLD 23 | MLTPL | |
| Neptune® HP Fire Service Turbine Meter | 3" - 10" | CLD 23 | MLTPL | |
| Neptune® HP Fire Service Turbine S Meter | 3" - 10" | CLD 23 | MLTPL | |
| Neptune® HP Protectus III Meter Assembly | 4" - 10" | CLD 23 | MLTPL | |
| Neptune® HP Protectus III S Meter Assembly | 4" - 10" | CLD 23 | MLTPL | |
| Neptune® High Performance Fire Service Turbine Meter | 3" - 10" | CLD 23 | MLTPL | |
| Neptune® High Performance Fire Service Turbine S Meter | 3" - 10" | CLD 23 | MLTPL | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[2] EU1XXXXBXX:
X1 - Size
X2 - Technology
X3 - Consumption Rate
X4 - Options
B - Mach10
X5 - Pressure (1 - No, 2 - Yes)
X6 - Switch
[3] The trade name may be followed by an alpha character (A-I), which denotes the following
connection size x
length and type:
- 1-1/2 x 13 flange
- 1-1/2 x 10 flange
- 1-1/2 x 12-5/8 screw
- 1-1/2 x 12-5/8 thread
- 2 x 17 flange
- 2 x 10 flange
- 2 x 15-1/4 flange
- 2 x 15-1/4 screw
- 2 x 15-1/4 thread
- 3 x 12 flange
- 3 x 17 flange
- 4 x 14 flange
- 4 x 20 flange
- 6 x 18 flange
- 6 x 24 flange
- 8 x 20 flange
- 10 x 26 flange
- 12 x 19 flange
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 16
Processing time was 0 seconds
