NSF Product and Service Listings

These NSF Official Listings are current as of Friday, April 18, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=49950&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.


 
Watts Regulator Company 
815 Chestnut Street
North Andover, MA 01845 
United States 
978-689-6165
Visit this company's website

Facility : # 1 Zhejiang, China

Mechanical Plumbing Devices

Trade Designation      

Supply Stops[G]
LF-PBQT-090[1] [3]      
LF-PBQT-100[1] [3]      
LF-PBQT-110[1] [3]      
LF-PBQT-113[1] [3]      
LF-PBQT-118[1] [3]      
LF-PBQT-122[1] [3]      
LF-PBQT-210[1] [3]      
LF-PBQT-213[1] [3]      
LF-PBQT-218[1] [3]      
LF-PBQT-222[1] [3]      
LF-PBQT-290[1] [3]      
LF-PBQT-310[1] [3]      
LF-PBQT-600[1] [3]      
LF-PBQT-610[1] [3]      
LF-PBQT-710[1] [3]      
LF-PBQT-810[1] [3]      
LF-PBQTB-250[1] [3]      
LF-PBQTC-270[1] [3]      
LF-PBQTC-670[1] [3]      
LF-PBQTP-650[1] [3]      
LF-PBQTR-615[1] [3]      
LF389000X[1] [2]      
LF389200X[1] [2]      
LF389400X[1] [2]      
LF88900X[1] [2]      
LF88901X[1] [2]      
LF89000X[1] [2]      
LF89001X[1] [2]      
LF89020X[1] [2]      
LF89030X[1] [2]      
LF89120X[1] [2]      
LF89121X[1] [2]      
LF89200X[1] [2]      
LF89201X[1] [2]      
LF89215X[1] [2]      
LF89240X[1] [2]      
LF89241X[1] [2]      
LF89400X[1] [2]      
LF89401X[1] [2]      
LF89415X[1] [2]      
LF89501X[1] [2]      
LF89601X[1] [2]      
LFBV38900X[1] [3]      
LFBV38940X[1] [3]      
LFBV88900X[1] [3]      
LFBV88901X[1] [3]      
LFBV89000X[1] [3]      
LFBV89001X[1] [3]      
LFBV89020X[1] [3]      
LFBV89115X[1] [3]      
LFBV89120X[1] [3]      
LFBV89121X[1] [3]      
LFBV89131X[1] [3]      
LFBV89200X[1] [3]      
LFBV89201X[1] [3]      
LFBV89240X[1] [3]      
LFBV89241X[1] [3]      
LFBV89250X[1] [3]      
LFBV89251X[1] [3]      
LFBV89400X[1] [3]      
LFBV89421X[1] [3]      
LFDV389400X[1] [2]      
LFDV38941X[1] [2]      
LFDV389431X[1] [2]      
LFP-550[1] [3]      
LFP-551[1] [3]      
LFP-555[1] [3]      
LFWPAS-2PB[1] [3]      
LFWPAS-9PB[1] [3]      
LFWPSS-1B[1] [3]      
LFWPSS-3PB[1] [3]      
LFWPSS-8PB[1] [3]      

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[2] Suffix "X"
    1   - Rough brass
    3   - Chrome plated
    LK  - Loose key system
    LN  - Less nut
    PB  - Polished brass
    SD  - Screw driver stem
    WEL - With escutcheon and less compression nut
[3] Suffix "X"
    3   – Chrome plated
    LK  – Loose key stem
    LN  – Less nut
    PB  – Polished brass
    SD  – Screw driver stem
    WEL – With escutcheon and less compression nut
    

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 2 Zhejiang, China

Mechanical Plumbing Devices

Trade Designation      

Flexible Plumbing Connectors[G]

Reinforced Vinyl Dishwasher Supply Lines[1]
FS-CDC-P-CE[2]      
FS-CDC-P-FE[2]      
FS-CDC-S-CC[2]      
FS-CDC-S-CE[2]      
FS-CDC-S-FE[2]      
FSDW60      
FSDW72      
LF-CDC-A-CE Antimicrobial Connector[2]      
LF-CDC-S-CE      
MFS SCC60-66EPB      
MFS SCC72-66EPB      

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[2] LF - Lead free
    FS - FloodSafe
    CDC - Dishwasher connector
    CFC - Faucet connector
    CSC - Connector steam cooking
    CTC - Toilet connector
    A - Thread weave with coextruded clear vinyl with antimicrobial additive
    P - Reinforced vinyl hose
    S - Stainless steel braid over reinforced vinyl hose
    Type of connection from supply (maximum inlet size 1/2"):
    C - Compression end fitting
    F - FIP end fitting
    T - Fine thread FIP end fitting
    Type of connection to fixture (maximum outlet size 7/8"):
    B  - Ballcock end fitting w/plastic nut
    BB - Ballcock end fitting w/brass nut*
    C  - Compression end fitting
    E  - MIP elbow end fitting
    F  - FIP end fitting
    HH - Garden hose connection
    O  - OD compression end fitting
    Hose has I.D. of 0.28" and length of 6" - 72".
    FS may be used as a prefix or be used after the first letter of the trade name that
    begins with M or T to indicate the use of a Floodsafe check valve on the supply side
    end.
    *Models LF-CFC-P-BB and LF-CFC-S-BB have ballcock connections on both ends and the
    maximum inlet and outlet size is 7/8".

Reinforced Vinyl Faucet Supply Lines[1]
LF-AMF20-68 Antimicrobial Connector      
LF-CFC-A-CF Antimicrobial Connector[2]      
LF-CFC-P-BB[2]      
LF-CFC-P-CC[2]      
LF-CFC-P-CF[2]      
LF-CFC-P-CO[2]      
LF-CFC-P-FF[2]      
LF-CFC-P-TF[2]      
LF-CFC-S-BB[2]      
LF-CFC-S-CC[2]      
LF-CFC-S-CF[2]      
LF-CFC-S-CO[2]      
LF-CFC-S-FF[2]      
LF-CFC-S-TF[2]      
LF-F12      
LF-F16      
LF-F16-88      
LF-F20      
LF-F20-88      
LF-FC20-88      
LF-M S12-88      
LF-M S20-88      
LF-M SC12-68      
LF-M SC16-68      
LF-M SC20-68      
LF-M SC36-68      
LF-SM12-68 Antimicrobial Connector      
LF-SM20-68 Antimicrobial Connector      
LF-TS12-88 Stainless Steel      
LF-TS20-88 Stainless Steel      
LF-TSC12-68 Stainless Steel      
LF-TSC16-68 Stainless Steel      
LF-TSC20-68 Stainless Steel      
LF-TSC30-68PB Stainless Steel      
LMBLK 16-88      
LMBLK 20-88      
LMBLK BC16-1414      
LMBLK C16-68      
LMBLK SBC16-1414      
LMBLK SP16-88      
LMBLK SP20-88      
LMBLK SPC16-68      
LMBLK SPT16-814      
LMBLK SPT20-814      
LMBLK T16-814      
LMCP S16-88      
LMCP ST16-814      
LMPB 30-88      
LMPB 48-88      
MLB112AF      
MLB112DLF      
MLB112DLMF      
MLB112DWF      
MLB112KCF      
MLB116AF      
MLB116DLF      
MLB120AF      
MLB120DLF      
MLB120DWF      
MLB120KCF      
MLB130AF      
MLB148DW6D      
MLB160DW6D      
MLB172DW6D      
MLB19DLF      
MLB812AF      
MLB812DLF      
MLB816AF      
MLB816DLF      
MLB820AF      
MLB830AF      
MLBF120AF      

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[2] LF - Lead free
    FS - FloodSafe
    CDC - Dishwasher connector
    CFC - Faucet connector
    CSC - Connector steam cooking
    CTC - Toilet connector
    A - Thread weave with coextruded clear vinyl with antimicrobial additive
    P - Reinforced vinyl hose
    S - Stainless steel braid over reinforced vinyl hose
    Type of connection from supply (maximum inlet size 1/2"):
    C - Compression end fitting
    F - FIP end fitting
    T - Fine thread FIP end fitting
    Type of connection to fixture (maximum outlet size 7/8"):
    B  - Ballcock end fitting w/plastic nut
    BB - Ballcock end fitting w/brass nut*
    C  - Compression end fitting
    E  - MIP elbow end fitting
    F  - FIP end fitting
    HH - Garden hose connection
    O  - OD compression end fitting
    Hose has I.D. of 0.28" and length of 6" - 72".
    FS may be used as a prefix or be used after the first letter of the trade name that
    begins with M or T to indicate the use of a Floodsafe check valve on the supply side
    end.
    *Models LF-CFC-P-BB and LF-CFC-S-BB have ballcock connections on both ends and the
    maximum inlet and outlet size is 7/8".

Reinforced Vinyl Icemaker Supply Lines
LF-CIC-P-CC[1] [3]      
LF-CIC-S-CC[1] [3]      
LF-FS-CIC-P-CC[1] [3]      
LF-FS-CIC-S-CC[1] [3]      
LF-FSK-7[1]      
LF-K-7[1]      
LF-M SCC120-44[1]      
LF-MFS SCC120-44[1]      
MLB060IM      
MLB072IM      

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[3] Hose has I.D. of 0.28" and length of 6-20 feet.
    Supply side end is a flow check valve.
    FS  - FloodSafe 
    CIC - Ice Maker Supply Line 
    S   - Stainless Steel Braid over Reinforced Vinyl Hose 
    P   - Reinforced Vinyl Hose 
    Type of Connection From Supply (maximum inlet and outlet size 1/4")
    C   - Compression End Fitting

Reinforced Vinyl Toilet Supply Lines[1]
LF-AMT-16-614 Antimicrobial Connector      
LF-AMT12-614 Antimicrobial Connector      
LF-AMT20-614 Antimicrobial Connector      
LF-CSC-P-HH[2]      
LF-CTC-A-CB[2]      
LF-CTC-P-CB[2]      
LF-CTC-P-FB[2]      
LF-CTC-P-TB[2]      
LF-CTC-S-CB[2]      
LF-CTC-S-FB[2]      
LF-CTC-S-TB[2]      
LF-M SCT12-614W      
LF-M SCT16-614W      
LF-M SCT20-614W      
LF-M SCT9-614W      
LF-M ST12-814W      
LF-M ST20-814W      
LF-SMT12-614 Antimicrobial Connector      
LF-SMT20-614 Antimicrobial Connector      
LF-T12      
LF-T12-814      
LF-T20      
LF-T20-814      
LF-TC12-814      
LF-TC20-814      
LF-TSCT12-614W Stainless Steel      
LF-TSCT16-614W Stainless Steel      
LF-TSCT20-614W Stainless Steel      
LF-TSCT9-614W Stainless Steel      
LF-TST12-814 Stainless Steel      
LF-TST20-814 Stainless Steel      

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[2] LF - Lead free
    FS - FloodSafe
    CDC - Dishwasher connector
    CFC - Faucet connector
    CSC - Connector steam cooking
    CTC - Toilet connector
    A - Thread weave with coextruded clear vinyl with antimicrobial additive
    P - Reinforced vinyl hose
    S - Stainless steel braid over reinforced vinyl hose
    Type of connection from supply (maximum inlet size 1/2"):
    C - Compression end fitting
    F - FIP end fitting
    T - Fine thread FIP end fitting
    Type of connection to fixture (maximum outlet size 7/8"):
    B  - Ballcock end fitting w/plastic nut
    BB - Ballcock end fitting w/brass nut*
    C  - Compression end fitting
    E  - MIP elbow end fitting
    F  - FIP end fitting
    HH - Garden hose connection
    O  - OD compression end fitting
    Hose has I.D. of 0.28" and length of 6" - 72".
    FS may be used as a prefix or be used after the first letter of the trade name that
    begins with M or T to indicate the use of a Floodsafe check valve on the supply side
    end.
    *Models LF-CFC-P-BB and LF-CFC-S-BB have ballcock connections on both ends and the
    maximum inlet and outlet size is 7/8".

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 4 Zhejiang, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
(1)-BF-(2)-(3)(4)(5)-(6)(7)[1] [2] [G] 2" - 48" CLD 23 MLTPL
405 NRS F x F[1] [G] 2 1/2" x 10" CLD 23 MLTPL
405 NRS F x G[1] [G] 2 1/2" x 10" CLD 23 MLTPL
LF N45(X)-(Y)-M1[1] [3] [G] 1/2" - 1" CLD 23 MLTPL
LF N55(X)-(Y)-M1[1] [3] [G] 1/2" - 1" CLD 23 MLTPL
LF-FBV[1] [G] 1/4" - 2" CLD 23 MLTPL
LF-FBV-4[1] [G] 1/4" - 4" CLD 23 MLTPL
LF-FBV-E[1] [G] 1/4" - 2" CLD 23 MLTPL
LF-FBV-E-FRG[1] [G] 1/2" - 2" CLD 23 MLTPL
LF-FBV-E-LH[1] [G] 1/2" - 2" CLD 23 MLTPL
LF-FBV-FRG[1] [G] 1/2" - 2" CLD 23 MLTPL
LF-FBV-LH[1] [G] 1/2" - 2" CLD 23 MLTPL
LF-FBV-M[1] [G] 1/2" - 3/4" CLD 23 MLTPL
LF-FBVS-4[1] [G] 1/2" - 3" CLD 23 MLTPL
LF-IS6301[1] [G] 1/2" - 1" CLD 23 MLTPL
LF-IT6300[1] [G] 1/2" - 1" CLD 23 MLTPL
LF-WBV-3[1] [G] 1/8" - 4" CLD 23 MLTPL
LF-WBVC-M1[1] [G] 1/2" - 1" CLD 23 MLTPL
LF-WBVS-3[1] [G] 3/8" - 3" CLD 23 MLTPL
LFFBV-3C-X[1] [4] [G] 1/4" - 4" CLD 23 MLTPL
LFFBVS-3C-X[1] [4] [G] 1/2" - 3" CLD 23 MLTPL
LFIT6300 with Drain [G] 1/2" - 1" CLD 23 MLTPL
LFTWH (XX)-(YY)[1] [5] [G] 3/4" - 1" D. HOT MLTPL
LFX65B (x)-(Y)-Z1[1] [6] [G] 1/2" - 2" CLD 23 MLTPL
LFX65B(X)-(Y)[1] [6] [G] 1/2" - 2" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[2] (1) Size: 02 - 24
    (2) Body style
        03 - Lug
        04 - Wafer
    (3) Body material
        1 - Cast iron
        2 - Ductile iron
    (4) Disc material 
        2 - Aluminum bronze
        3 - SS 316
    (5) Shaft material 
        1 - Stainless steel 416
        2 - Stainless steel 316
        3 - Stainless steel 431
    (6) Seat material
        1 - EPDM (Canada)
        4 - EPDM (US)
    (7) Operator 
        0 - No handle
        5 - Standard handle
        G - Gear operator
        P - Positioning/locking kit with handle
[3] LF - Lead free construction 
    (X) May be any combination of the following letters:
        B  - Bypass feature 
        DU - Double union connection 
        G  - Gauge tapping 
        GG - Gauge tapped w/ gauge 
        LP - Low pressure
        U  - Single union connection 
    (Y) May be any of the following:
        CPVC - CPVC tubing connection
        EZ   - Easily adjustable w/ visible setting indicator
        PEX  - PEX tubing connection 
        S    - Solder connection
        SBrass - Sweat with brass tailpiece 
        THD  - Standard threaded pipe connection, when used in combination with another 
              connection type 
        Z6   - Water meter connections
[4] Suffix may include:
    CC - Cap and chain
    QC - Quick Connect
    SS - Stainless steel ball and stem
    TH - Tee handle
[5] This product has not been evaluated for use with end-point devices (tankless water
    heaters used directly under a sink).  H valves have a red handle and dielectric
    insulator, are used on the outlet side of a tankless water heater, and do not contain an
    internal check.  CN valves have a blue handle and dielectric insulator, are used on the
    inlet side of a tankless water heater, and do not contain an internal check.  C valves
    have a blue handle and dielectric insulator, are used on the inlet side of a tankless
    water heater, and contain an internal check.
    
    (XX) Water line connection type
         FS  - Female sweat
         FT  - Female pipe thread
         QC  - Quick connect
         US  - Union ferrale sweat
         UT  - Union female thread
         UTS - Union thread and sweat options included
    (YY) Valve type
         C   - Cold water valve
         CN  - Cold water valve, no internal check
         H   - Hot water valve
         HC  - Hot and cold valve shipped in one box
         HCN - Hot and cold valve, no internal check shpped in one box
    (Z) Valve type can have an additional -Z for special packaging
[6] LF - Lead free construction
    (X) May be any combination of the following letters:
        CPVC - CPVC connection
        DU   - Double union connection
        PEX  - PEX connection
        QC   - Quick connect
        S    - Solder connection
        U    - Single union connection
    (Y) May be any of the following:
        070 - Pre set 70 psi
        DU  - Double union connection
        G   - Gauge tapping
        HP  - High pressure
        RIK - Rough-In kit
        S   - Solder connection
        U   -Single union connection
    Z1 - Suffix indicating customer special order.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
LF4501B-1008 Male NPT Connector 1/2" D. HOT MLTPL
LF4501B-1412 Male NPT Connector 3/4" D. HOT MLTPL
LF4501B-1416 Male NPT Connector 3/4" x 1" D. HOT MLTPL
LF4501B-1812 Male NPT Reducing Connector 1" x 3/4" D. HOT MLTPL
LF4501B-1816 Male NPT Connector 1" D. HOT MLTPL
LF4510B-1008 Female NPT Connector 1/2" D. HOT MLTPL
LF4510B-1412 Female NPT Connector 3/4" D. HOT MLTPL
LF4510B-1416 Female NPT Connector 3/4" x 1" D. HOT MLTPL
LF4510B-1812 Female NPT Reducing Connector 1" x 3/4" D. HOT MLTPL
LF4510B-1816 Female NPT Connector 1" D. HOT MLTPL
LF4515B-10 Union Connector 1/2" D. HOT MLTPL
LF4515B-14 Union Connector 3/4" D. HOT MLTPL
LF4515B-18 Union Connector 1" D. HOT MLTPL
LF4515RB-1410 Reducing Union Conn. 3/4" x 1/2" D. HOT MLTPL
LF4515RB-1814 Reducing Union Conn. 1" x 3/4" D. HOT MLTPL
LF4516B-10 Slip Connector 1/2" D. HOT MLTPL
LF4516B-14 Slip Connector 3/4" D. HOT MLTPL
LF4516B-18 Slip Connector 1" D. HOT MLTPL
LF4517B-10 Union Elbow 1/2" D. HOT MLTPL
LF4517B-14 Union Elbow 3/4" D. HOT MLTPL
LF4517B-18 Union Elbow 1" D. HOT MLTPL
LF4517RB-1410 Reducing Union Elbow 3/4" x 1/2" D. HOT MLTPL
LF4517RB-1814 Reducing Union Elbow 1" x 3/4" D. HOT MLTPL
LF4518B-10 Stackable Union Elbow 1/2" D. HOT MLTPL
LF4518B-14 Stackable Union Elbow 3/4" D. HOT MLTPL
LF4518B-18 Stackable Union Elbow 1" D. HOT MLTPL
LF4521B-1008 Drop Ear Elbow 1/2" D. HOT MLTPL
LF4521B-1412 Drop Ear Elbow 3/4" D. HOT MLTPL
LF4522B-10 Union Elbow 45 1/2" D. HOT MLTPL
LF4522B-14 Union Elbow 45 3/4" D. HOT MLTPL
LF4522B-18 Union Elbow 45 1" D. HOT MLTPL
LF4522SB-10 Stackable Union Elbow 45 1/2" D. HOT MLTPL
LF4522SB-14 Stackable Union Elbow 45 3/4" D. HOT MLTPL
LF4522SB-18 Stackable Union Elbow 45 1" D. HOT MLTPL
LF4523B-10 Union Tee 1/2" D. HOT MLTPL
LF4523B-14 Union Tee 3/4' D. HOT MLTPL
LF4523B-18 Union Tee 1' D. HOT MLTPL
LF4524RB-141014 Reducing Union Tee 3/4" x 1/2" x 3/4" D. HOT MLTPL
LF4524RB-141410 Reducing Union Tee 3/4" x 3/4" x 1/2" D. HOT MLTPL
LF4524RB-181418 Reducing Union Tee 1" x 3/4" x 1" D. HOT MLTPL
LF4524RB-181814 Reducing Union Tee 1" x 1" x 3/4" D. HOT MLTPL
LF4526RB-141010 Double Reducing Union Tee 3/4" x 1/2" x 1/2" D. HOT MLTPL
LF4526RB-181414 Double Reducing Union Tee 1" x 3/4" x 3/4" D. HOT MLTPL
LF4531B-141614 Union Tee 3/4" x 3/4" x 1" D. HOT MLTPL
LF4531B-181618 Union Tee 1" x 1" x 1" D. HOT MLTPL
LF4545B-10 End Stop 1/2" D. HOT MLTPL
LF4545B-14 End Stop 3/4" D. HOT MLTPL
LF4545B-18 End Stop 1" D. HOT MLTPL

[1] LF prefix indicates low lead.  Only LF products comply with Annex G.  Products may or
    may not have the LF prefix.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Hudson, MA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
TR12P1-1212-IPS 3/4" CLD 23 MLTPL
TR12P1-1616-IPS 1" CLD 23 MLTPL
TR12P1-2020-IPS 1 1/4" CLD 23 MLTPL
TR12P1-2424-IPS 1 1/2" CLD 23 MLTPL
TR12P1-3232-IPS 2" CLD 23 MLTPL
TR15P1-1212-IPS 3/4" CLD 23 MLTPL
TR15P1-1612-IPS 1" x 3/4" CLD 23 MLTPL
TR15P1-1616-IPS 1" CLD 23 MLTPL
TR15P1-2016-IPS 1 1/4" x 1" CLD 23 MLTPL
TR15P1-2020-IPS 1 1/4" CLD 23 MLTPL
TR15P1-2420-IPS 1 1/2" x 1 1/4" CLD 23 MLTPL
TR15P1-2424-IPS 1 1/2" CLD 23 MLTPL
TR15P1-3224-IPS 2" x 1 1/2" CLD 23 MLTPL
TR15P1-3232-IPS 2" CLD 23 MLTPL
TR18P1-121212-IPS 3/4" CLD 23 MLTPL
TR18P1-161616-IPS 1" CLD 23 MLTPL
TR18P1-202020-IPS 1 1/4" CLD 23 MLTPL
TR18P1-242424-IPS 1 1/2" CLD 23 MLTPL
TR18P1-323232-IPS 2" CLD 23 MLTPL
TR19P1-1212-IPS 3/4" CLD 23 MLTPL
TR19P1-1616-IPS 1" CLD 23 MLTPL
TR19P1-2020-IPS 1 1/4" CLD 23 MLTPL
TR19P1-2424-IPS 1 1/2" CLD 23 MLTPL
TR19P1-3232-IPS 2" CLD 23 MLTPL
TR24P1-12-IPS 3/4" CLD 23 MLTPL
TR24P1-16-IPS 1" CLD 23 MLTPL
TR24P1-20-IPS 1 1/4" CLD 23 MLTPL
TR24P1-24-IPS 1 1/2" CLD 23 MLTPL
TR24P1-32-IPS 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Randolph, MA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Thermal Expansion Tanks[G]
PLT-35 14 gal. D. HOT MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Kansas City, MO

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe[G]
PlumbFLOW 1/8" - 2" C. HOT PEX
RadiantFLOW 1/8" - 2" C. HOT PEX
RadiantPEX 1/8" - 2" C. HOT PEX
RadiantPEX+ (w/ O2 Barrier) 1/8" - 1" C. HOT PEX
WaterPEX 1/8" - 2" C. HOT PEX
Watts Heating PEX (w/ O2 Barrier) 1/8" - 2" C. HOT PEX
Watts Radiant PEX (w/ O2 Barrier) 1/8" - 2" C. HOT PEX

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Franklin, NH

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers [G]
(XX)007-YY-ZZ[1] [2] 1/2" CLD 23 MLTPL
(XX)007M1-YY-ZZ[1] [2] 1" - 2" CLD 23 MLTPL
(XX)007M2-YY-ZZ[1] [2] 1 1/4" - 1 1/2" CLD 23 MLTPL
(XX)007M3-YY-ZZ[1] [2] 3/4" CLD 23 MLTPL
(XX)009-YY-ZZ[1] [2] 1/4" - 1/2" CLD 23 MLTPL
(XX)009M2-YY-ZZ[1] [2] 1" - 2" CLD 23 MLTPL
(XX)009M3-YY-ZZ[1] [2] 3/4" CLD 23 MLTPL
LF07SU2-2 1 1/2" , 2" C. HOT MLTPL
LF709[1] [3] 2 1/2" - 10" CLD 23 MLTPL
LF719[4] 1/2" - 2" CLD 23 MLTPL
LF7R[1] [5] 1/2" - 1" C. HOT MLTPL
LF850(1)(2)[6] 2 1/2" - 10" CLD 23 MLTPL
LF860(1)(2)[6] 2 1/2" - 10" CLD 23 MLTPL
LF909[1] [3] 2 1/2" - 6" CLD 23 MLTPL
LF909-X[1] [7] 3/4" - 1" CLD 23 MLTPL
LF909M1[1] [3] 8" - 10" CLD 23 MLTPL
LF909M1-X[1] [7] 1 1/4" - 2" CLD 23 MLTPL
LF919[4] 1/2" - 2" CLD 23 MLTPL
LFU007-YY-ZZ[1] [2] 1/2" CLD 23 MLTPL
LFU007M1-YY-ZZ[1] [2] 1" - 2" CLD 23 MLTPL
LFU007M2-YY-ZZ[1] [2] 3/4" - 1 1/2" CLD 23 MLTPL
LFU009-YY-ZZ[1] [2] 1/2" CLD 23 MLTPL
LFU009M2-YY-ZZ[1] [2] 3/4" - 2" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[2] XX - LF - Lead free
         SS - Stainless steel
    YY - LF - Supplied without shut-off valves
         QT - Supplied with shut-off valves
    ZZ - Any combination of the following:
         Blank - Standard unit
         BC - Brass cap
         CT (or C & T) - Cap and teather
         LH - Locking handles
         S  - Strainer (LF777SI) 
         SH - Stainless handles
         Z3 - Stainless handles and nuts
         Z4 - Non-removable handles
         Z5 - Special dipped test cock adapter
[3] Suffixes may consist of the following:
    LF  - Assembly ships without isolation shut-off valves
    NRS - Non-rising stem
    DNRS - Domestic non-rising stem
    OSY  - Outside stem and yoke
    DOSY - Domestic outside stem and yoke
    -S   - FDA model 77F-DI-FDA-125
[4] Products may include one or more of the following prefixes or suffixes:
    S - Lead Free Strainer
    LF (as suffix) - Less fitting
    LF (as prefix) - Lead free
    QT - Quarter turn ball valve
    Options for non-wetted:
    C & T - Cap and tether test cock covers
    LH    - Locking handled ball valves
    SH    - Stainless handled ball valves
[5] Two suffix codes, denoting the connections, follow the LF7R. 
    2:  NPTF; female pipe connection [not a union] (1/2", 3/4", 1") 
    3:  NPTM; male pipe connection [not a union] (3/4")
    5:  Meter thread male pipe connection [not a union] (1")
    U2: NPTF female union pipe connection (1/2", 3/4", 1") 
    U3: NPTM; male union pipe connection (3/4") 
    U4: Meter thread female union pipe connection (3/4")
    10: Meter thread union connection (1")
[6] Suffixes may consist of:
    (1) Isolation Shut-off Valve Options: 
        LG   - Assembly ships without isolation shut-off valves 
        NRS  - Non-rising stem 
        DNRS - Domestic mon-rising stem 
        OSY  - Outside stem and yoke 
        DOSY - Domestic outside stem & yoke 
    (2) Installation Option:
        LH - Test cocks mounted for right-to-left flow installation
[7] (X) - Any combination of the following, appearing in the order below:
          HW - Stainless steel check modules for harsh water conditions
          QT - Quarter turn ball valves
          LF - Without shut-off valves
          S  - Strainer
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves[1] [G]
(D) (LF) 25AUB (X)[8] 1/2" - 2" CLD 23 MLTPL
52572NL 1/2" CLD 23 MLTPL
52573NL 3/4" CLD 23 MLTPL
52574NL 1" CLD 23 MLTPL
52577NL 1/2" CLD 23 MLTPL
52587NL 3/4" CLD 23 MLTPL
52588NL 1" CLD 23 MLTPL
LF-223[9] 1/2" - 2" CLD 23 MLTPL
LF-N223-M1[9] 2 1/2" CLD 23 MLTPL
LF-N223-M2[9] 3" CLD 23 MLTPL
LF-N45(X)[10] 1/2" - 2" CLD 23 MLTPL
LF-N55(X)[10] 1/2" - 2" CLD 23 MLTPL
LFX65B(X)-(Y) [11] 1/2" - 2" CLD 23 MLTPL
LFX65B(X)-(Y)-Z1[11] 1/2" - 2" CLD 23 MLTPL
P60-M1[12] 1/4" CLD 23 MLTPL
P60-M1-4[12] 1/4" CLD 23 MLTPL
Series LF-5[13] 1/2" - 2" CLD 23 MLTPL
Series LF-L5[13] 1/2" - 2" CLD 23 MLTPL
Series LF-U5[13] 1/2" - 2" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[8] (D) Domestic manufacture
    (X) May be any combination of the following:
        CPVC - CPVC tubing connection
        DU   - Double union connection
        G    - Gauge tapping
        GG   - Gauge tapped with gauge
        HP   - High pressure
        LP   - Low pressure
        M3-Z6- Water meter connections
        PEX  - PEX tubing connection
        S    - Solder pipe connection
        SC   - Sealed cage
        S-DU - Double union solder inlet & outlet connections
        STD  - Standard model
        Z3   - Sealed cage/corrosion resistant screws
        Z7   - 400 psi
        Z10  - No union connection
[9] Suffixes:
    B      - Built-in bypass
    BS     - British thread
    G      - Gauge tapping
    GG     - Gauge tapped with gauge
    HP     - High pressure
    LP     - Low pressure
    S      - Strainer attached
    STD    - Standard
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] (X) May be any combination of the following:
         B      - Bypass feature
         CPVC   - CPVC tubing connection
         DU     - Double union connection
         EZ     - Easilty adjustable w/visible setting indicator
         G      - Gauge tapping
         HP     - High pressure
         LP     - Low pressure
         M1     - First model
         PEX    - PEX tubing connection
         S      - Solder connection
         SBRASS - Sweat with brass tailpiece 
         THD    - Standard threaded pipe connection, when used in combination 
                  with another connection type
         U      - Single union connection
         W      - Special body end threads
         Z6     - Water meter connections
         070    - Pre-Set 70 PSI
[11] LF in the trade name indicates lead free construction. 
     The Z1 suffix indicates customer special order. 
     (X) Indicates any combination of the following letters: 
         U    - Single union connection 
         DU   - Double union connection 
         S    - Solder connection 
         PEX  - PEX Connection 
         QC   - Quick Connect 
         CPVC - CPVC Connection 
     (Y) Indicates any of the following: 
         G   - Gauge tapping 
         HP  - High Pressure any combination of the following letters: 
         U   - Single union connection 
         DU  - Double union connection 
         S   - Solder connection 
         RIK - Rough-In Kit 
         070 - Pre set 70 psi
[12] Suffixes may consist of the following:
     0-125    - Pressure rating
     12 WO-El - Special customer
     QD       - Quick disconnect
     RK       - Repair kit
     V        - Viton O-Ring
     Z5       - Special customer
     Z15      - Special customer
[13] B     - Bypass feature
     G     - Guage tapping
     GG    - Guage tapped with guage
     HP    - High pressure
     LP    - Low pressure
     M3-Z6 - Water meter connections (3/4" & 1")
     S     - Solder pipe connection
     SC    - Sealed cage
     Z3    - Sealed cage/corrosion resistant screws
     Z9    - NPT Male thread union inlet (3/4")


Mechanical Plumbing Devices

Trade Designation      

End Point Control Valves
0.375 LFUSG-B M2[1] [G]      
0.375 LFUSG-B-SC M2[1] [G]      

[1] Optional QC indicating quick connect fitting.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Faucets[2] [3] [G]
1070 Thermostatic Faucet      
1070-6 Thermostatic Faucet      
1070A15 Thermostatic Faucet      
1070A5 Thermostatic Faucet      
1070PW Thermostatic Faucet      
G1070 Thermostatic Faucet      
G1070A5 Thermostatic Faucet      
G1070PW Thermostatic Faucet      
GP1070 Thermostatic Faucet      
GP1070A5 Thermostatic Faucet      
GP1070PW Thermostatic Faucet      
P1070 Thermostatic Faucet      
P1070-6 Thermostatic Faucet      
P1070A15 Thermostatic Faucet      
P1070A5 Thermostatic Faucet      
P1070PW Thermostatic Faucet      

[2] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[3] Suffixes:
    -6  - 6" Handle (4" is the default size)
    A15 - Aerator flow rate is 1.5 gpm
    A5  - Aerator flow rate is 0.5 gpm (default flow rate is 2.0 GPM)
    GD  - Grid Drain
    OGD - Offset Grid Drain
    L   – Laminar flow outlet 
    L5  – 0.5 gpm laminar flow outlet 
    PW  - Faucet has pop-up waste stopper
    VA  - Vandal-resistant aerator 
    V5  – Vandal-resistant 0.5 gpm aerator 
    VL  - Vandal-resistant laminar flow outlet 
    VL5 - Vandal-resistant 0.5 gpm laminar flow outlet 
    Prefixes:
    G - Gooseneck spout
    P - Deck plate
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Ningbo, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Backflow Preventers[1] [2] [G]
LF850 1/2" - 2" CLD 23 MLTPL
LF850U 1/2" - 2" CLD 23 MLTPL
LF860 1/2" - 2" CLD 23 MLTPL
LF860U 1/2" - 2" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[2] Product may have box stickers or temporary tags with the following configuration
    descriptions. 
    LF850 / LF850U: 
    QT - Quarter Turn Ball Valve 
    DC - Double Check Assembly 
    LF860 / LF860U: 
    QT - Quarter Turn Ball Valve 
    RP - Reduced Pressure Assembly 
    RPZ - Reduced Pressure Zone
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Strainer[1] [G]
LF777 SI 3/8" - 3" CLD 23 MLTPL
LFS777 SI 1/2" - 2" CLD 23 MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Shanghai, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Manifolds[1] [G]
QC Quick Connect WPQCM-5 [2] D. HOT MLTPL
WPPM-12-M3BB [5] D. HOT MLTPL
WPPM-12-M4AB [11] D. HOT MLTPL
WPPM-12-M4BB [11] D. HOT MLTPL
WPPM-1212-M2AF [3] D. HOT MLTPL
WPPM-1212-M3AF [6] C. HOT MLTPL
WPPM-1212-M3BF [6] D. HOT MLTPL
WPPM-1212-M4AF [4] D. HOT MLTPL
WPPM-1212-M4BF [4] D. HOT MLTPL
WPPM-16-M6AB [9] D. HOT MLTPL
WPPM-1612-M4AF [7] D. HOT MLTPL
WPPM-1612-M6AF [8] D. HOT MLTPL
WPPM-1616-M6AF [10] D. HOT MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[2] 1" inlet & outlet x five 1/2" ports
[3] 3/4" inlet & outlet x two 1/2" ports
[4] 3/4" inlet & outlet x four 1/2" ports
[5] 3/4" inlet x three 1/2" ports
[6] 3/4" inlet & outlet x three 1/2" ports
[7] 1" inlet & 3/4" outlet x four 1/2" ports
[8] 1" inlet & 3/4" outlet x six 1/2" ports
[9] 1" inlet x six 1/2" ports
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] 1" inlet & outlet x six 1/2" ports
[11] 3/4" inlet x four 1/2" ports


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
WPEX 3/8" - 1" C. HOT MLTPL

[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
    the <= 0.25%.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Nogales, Sonara, Mexico

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Strainer[G]
P777-100 1/4" - 3/8" CLD 23 MLTPL
P777-20 1/4" - 3/8" CLD 23 MLTPL
P777-60 1/4" - 3/8" CLD 23 MLTPL
P777-80 1/4" - 3/8" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Mechanical Plumbing Devices

Trade Designation      

Flexible Plumbing Connectors
1/2" x 1/2" LFD-CFC-FFx20[2] [G]      

[1] Hose length is 6".
[2] Hose length is 20".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Supply Stops[G]
LFB889012C LFBasin Supply Kit      
LFB892012K LFBasin Supply Kit      
LFB894012C LFBasin Supply Kit      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tubing[G]
Clear Polyethylene Tubing 1/16" – 1" CLD 23 PE

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Taichung, Taiwan

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Thermal Expansion Tanks[G]
DET-12 19 L D. HOT MLTPL
DET-5 8 L D. HOT MLTPL
PLT-12 19 L D. HOT MLTPL
PLT-20 34 L D. HOT MLTPL
PLT-5 8 L D. HOT MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 400
Processing time was 0 seconds