NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=4C630&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
ITW Spraytec Nordic ApS | |
Priorsvej 36 | |
8600 Silkeborg | |
Denmark | |
45 86 82 64 44 |
Facility : # 1 Europe
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Adhesives |
||||
Kemlock AL-03 | >= 1/2" | C. HOT | ADH | |
Kemlock AL-38 | >= 1/2" | C. HOT | ADH | |
Kemlock AL-48 | >= 1/2" | C. HOT | ADH | |
Kemlock AP-10[2] | >= 1/2" | C. HOT | ADH | |
Kemlock AP-74[1] | >= 1/2" | C. HOT | ADH | |
Kemlock AS-43WM[1] | >= 1/2" | C. HOT | ADH | |
Kemlock AS-70 | >= 1/2" | C. HOT | ADH | |
Kemlock AS-75 | >= 1/2" | C. HOT | ADH | |
Kemlock CE-06 | >= 1/2" | CLD 23 | ADH | |
Kemlock CE-96 | >= 1/2" | CLD 23 | ADH | |
Kemlock CE-98 | >= 1/2" | CLD 23 | ADH | |
[1] Product requires a minimum 24 hour cure. [2] Certification is based on a minimum cure of 72 hours at 75°F. |
||||
Sealants |
||||
Kemlock AP-73 | >= 1/2" | C. HOT | SLT | |
Thread Compounds |
||||
Kemlock AS-70 | >= 1/2" | C. HOT | TC | |
Kemlock AT-72 | >= 1/2" | C. HOT | TC | |
Kemlock AT-77[2] | >= 1/2" | C. HOT | TC | |
[2] Certification is based on a minimum cure of 72 hours at 75°F. |
Number of matching Manufacturers is 1
Number of matching Products is 15
Processing time was 0 seconds