NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, April 20, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=4M620&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Victaulic Co. 
4901 Kesslersville Road
Easton, PA 18040 
United States 
800-742-5842 
610-559-3300
Visit this company's website


Facility : # 1 SS USA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [2] [G]
100 (90° Long Radius Elbow) (304L) 1" - 3" C. HOT SS
100 (90° Long Radius Elbow) (316L) 1 1/2" - 3" C. HOT SS
110 (45° Long Radius Elbow) (304L) 1" - 6" C. HOT SS
110 (45° Long Radius Elbow) (316L) 1" - 4" C. HOT SS
20 (Tee) (304L) 1 1/4" - 8" C. HOT SS
20 (Tee) (316L) 1 1/2" - 10" C. HOT SS
420 (Tee) (304L) 1 1/4" - 8" C. HOT SS
420 (Tee) (316L) 1 1/2" - 10" C. HOT SS
450 (Concentric Reducer) (304L) 1 1/2"x3/4" - 8"x6" C. HOT SS
450 (Concentric Reducer) (316L) 1 1/2"x1" - 8"x6" C. HOT SS
451 (Eccentric Reducer) (304L) 2"x1 1/2" - 8"x6" C. HOT SS
451 (Eccentric Reducer) (316L) 2" x 1" - 8" x 6" C. HOT SS
50 (Concentric Reducer) (304L) 1 1/2"x3/4" - 8"x6" C. HOT SS
50 (Concentric Reducer) (316L) 1 1/2"x1" - 8"x6" C. HOT SS
51 (Eccentric Reducer) (304L) 2"x1 1/2" - 8"x6" C. HOT SS
51 (Eccentric Reducer) (316L) 2" x 1" - 8" x 6" C. HOT SS
60 (Cap) (304L) 4" - 6" C. HOT SS
60 (Cap) (316L) 4" - 6" C. HOT SS 

[1] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from
    schedule 40S Grade 304 or 316 stainless steel pipe.  Default fabrication is 10S Grade
    304 or 316 stainless steel pipe.
[2] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : # 1 Switzerland

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
Victaulic Lubricant Grey[1] >= 1/2" CLD 23 LUB 

[1] Certified for a maximum surface area to volume ratio of 7.26 sq. in./L.



Facility : # 2 Canada

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [G]
100 (90° Long Radius Elbow)[2] 3" - 18" C. HOT SS
110 (45° Long Radius Elbow)[2] 3" - 18" C. HOT SS
410 (90° Elbow)[2] 3" - 18" C. HOT SS
411 (45° Elbow)[2] 3" - 18" C. HOT SS
420 (Tee)[2] 1" - 18" C. HOT SS
425 (Reducing Tee)[2] 1 1/2"x1" - 12"x10" C. HOT SS
440 (Adapter Nipple) (Groove ×Thread)[3] 1 1/4" - 12" C. HOT SS
442 (Adapter Nipple) (Groove × Bevel)[2] 2 ½" - 2" - 12"x10" C. HOT SS
443 (Adapter Nipple) (Groove x Groove)[2] [4] 4"x2" - 10"x8" C. HOT SS
445 (Flanged Adapter Nipple) Fittings[2] 1 1/4 - 12 in C. HOT SS
450 (Concentric Reducer) Fittings[2] 2 1/2 - 2 - 12x10in C. HOT SS
451 (Eccentric Reducer) Fittings[2] 4 x 2 - 10 x 8 in C. HOT SS
460 (Dish Cap)[2] 5", 8", 10" C. HOT SS 

[1] Models may feature suffix "SS" for commercial purposes.
[2] Certified for stainless steel fittings only and does not include the gasketed couplings.
[3] Product trade names may feature suffix "F" or "R" to denote flat (F) or raised (R)
    flange face.
[4] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from
    schedule 40S Grade 304 or 316 stainless steel pipe.  Default fabrication is 10S Grade
    304 or 316 stainless steel pipe.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : # 2 Dalian, China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
461 (Butterfly Valve) 2" - 12" C. HOT MLTPL
E461 (Butterfly Valve) 2" - 12" C. HOT MLTPL
462 (Butterfly Valve) 2" - 12" C. HOT MLTPL 

[1] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : # 3 SS USA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [2] [3] [G]
60 (Cap) (304L) 3/4" - 6" C. HOT SS
60 (Cap) (316L) 1" - 6" C. HOT SS
460 (Cap) (304L) 3/4" - 6" C. HOT SS
460 (Cap) (316L) 1" - 6" C. HOT SS 

[1] Certification is for stainless steel fittings only and does not include the gasketed
    couplings.
[2] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from
    schedule 40S Grade 304L or 316L stainless steel pipe.  Default fabrication is 10S Grade
    304L or 316L stainless steel pipe.
[3] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : # 5 SS China

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [2] [G]
410 (90° Elbow) 1 1/2" - 2 1/2" C. HOT SS
411 (45° Elbow) 1 1/2" - 2 1/2" C. HOT SS
420 (Tee) 1 1/2" - 2 1/2" C. HOT SS
425 (Grooved Branch Reducing Tee) 2" x 1½" - 2½" x 2" C. HOT SS
450 (Concentric Reducer) 2" x 1½" - 2½" x 2" C. HOT SS
460 (Cap) 3/4" - 12" C. HOT SS 

[1] Certified for stainless steel fittings only and does not include the gasketed couplings.
[2] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : # 6 SS China

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [2] [G]
29 (Threaded Branch Reducing Tee) 2" x 1" - 10" x 3" CLD 23 SS
52 (Threaded Reducer) 2" x 1" - 6" x 2" CLD 23 SS 

[1] Certified for stainless steel fittings only. Certification does not include the gasketed
    couplings.
[2] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Duluth, GA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Manifolds[1] [G]
26 (Outlet Header) 1 1/2"x1" - 12"x12" CLD 23 SS
57 (Concentric Reducing Header) 1 1/2"x1" - 12"x12" CLD 23 SS
58 (Eccentric Reducing Header) 1 1/2"x1" - 12"x12" CLD 23 SS 

[1] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Couplings[1] [2] [G]
230 (Non-Restrained Flexible Coupling) 6" - 144" CLD 23 MLTPL
232 (Restrained Flexible Coupling) 6" - 144" CLD 23 MLTPL
233 (Restrained Flexible Coupling) 6" - 144" CLD 23 MLTPL
Victaulic Bolted Split Sleeve Couplings 6" - 144" CLD 23 MLTPL 

[1] Certified for both full circumference and half couplings.
[2] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Fittings[2] [G]
100 (90° Elbow)[3] 3" - 18" C. HOT SS
110 (45° Elbow)[3] 3" - 18" C. HOT SS
410 (90° Elbow)[3] 3" - 18" C. HOT SS
411 (45° Elbow)[3] 3" - 18" C. HOT SS
420 (Tee)[3] 1" - 18" C. HOT SS
425 (Grooved Branch Reducing Tee)[3] 1 1/2"x1" - 12"x10" C. HOT SS
445 (Flanged Adapter Nipple)[4] 1 1/4" - 12" C. HOT SS
450 (Concentric Reducer)[3] 2 ½" - 2" - 12"x10" C. HOT SS
451 (Eccentric Reducer)[3] [5] 4"x2" - 10"x8" C. HOT SS
460 (Dish Cap)[3] 5", 8", 10" C. HOT SS
A10 (Floor- Mounted Carbon Steel Riser Anchor)[3] 2" - 12" C. HOT SS 

[2] Models may feature suffix "SS" for commercial purposes.
[3] Certified for stainless steel fittings only and does not include the gasketed couplings.
[4] Product trade names may feature suffix "F" or "R" to denote flat (F) or raised ® flange
    face.
[5] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from
    schedule 40S Grade 304 or 316 stainless steel pipe.  Default fabrication is 10S Grade
    304 or 316 stainless steel pipe.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Pipe[2] [3] [5] [G]
440 (Adapter Nipple) (Groove ×Thread) 1 1/2" x 4"-3" x 4" C. HOT SS
442 (Adapter Nipple) (Groove × Bevel) 1 1/2" x 4"-8" x 6" C. HOT SS
443 (Adapter Nipple) (Groove x Groove) 2" x 4" - 3" x 4" C. HOT SS 

[2] Models may feature suffix "SS" for commercial purposes.
[3] Certified for stainless steel fittings only and does not include the gasketed couplings.
[5] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from
    schedule 40S Grade 304 or 316 stainless steel pipe.  Default fabrication is 10S Grade
    304 or 316 stainless steel pipe.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Easton, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
416 (Check Valve)[372] 2" - 12" C. HOT MLTPL
461 (Butterfly Valve)[372] 2" - 12" C. HOT MLTPL
462 (Butterfly Valve)[372] 2" - 12" C. HOT MLTPL
702 (Butterfly Valve) 2 1/2" - 10" CLD 23 MLTPL
7A2 (Butterfly Valve) 2 1/2" - 10" CLD 23 MLTPL
7B2 (Butterfly Valve) 2 1/2" - 10" CLD 23 MLTPL
E416 (Check Valve)[372] 2" - 12" C. HOT MLTPL
E461 (Butterfly Valve)[372] 2" - 12" C. HOT MLTPL 

[1] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[372] Product also complies with NSF/ANSI 372.


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [2] [G] [372]
422 (Mechanical-T Outlet) 3" x 1 1/2"-8" x 4" C. HOT MLTPL 

[1] Certification includes sealing gasket Grade E EPDM only.
[2] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[372] Product also complies with NSF/ANSI 372.



Facility : Easton, PA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
610 (90° Elbow) 2" - 4" C. HOT CU
611 (45° Elbow) 2" - 5" C. HOT CU
625 (Reducing Tee) (Groove x Groove x Groove) 2 1/2" - 2" C. HOT CU
626 (Reducing Tee) (Groove x Groove x Cup) 2" x 3/4" - 4" x 1½" C. HOT CU
650 (Concentric Reducer) (Groove x Groove) 2" - 4" C. HOT CU
652 (Concentric Reducer) (Groove × Cup) 1" - 4" C. HOT CU 

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Bristol, TN

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
350 (90° Elbow) 2" - 12" C. HOT MLTPL
351 (45° Elbow) 2" - 12" C. HOT MLTPL
352 (Tee) 2" - 12" C. HOT MLTPL
353 (Reducing Tee) (Groove x Groove x Groove) 6"x6"x3" - 12"x10" C. HOT MLTPL
354 (Reducing Tee) (Groove × Groove × Socket) 2"x2"x1"-12"x12"x2" C. HOT MLTPL
Aquamine 2" - 12" CLD 23 MLTPL 

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Pipe[G]
Aquamine PVC 1120 High Impact Pipe 2" - 12" CLD 23 PVC 

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Dalian, China

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [2] [G]
410 (90° Elbow) 1" - 12" C. HOT SS
411 (45° Elbow) 1" - 12" C. HOT SS
420 (Tee) 1 1/2" - 12" C. HOT SS
425 (Grooved Branch Reducing Tee) 2"x1 1/2" - 12"x10" C. HOT SS
450 (Concentric Reducer) 2"x1 1/2" - 12"x10" C. HOT SS
460 (Cap) 3/4" - 12" C. HOT SS 

[1] Certified for stainless steel fittings only. Certification does not include the gasketed
    couplings.
[2] Models may feature suffix "SS" for commercial purposes.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 96
Processing time was 0 seconds