NSF Product and Service Listings
These NSF Official Listings are current as of Sunday, April 22, 2018 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=4M620&Standard=061&
NSF/ANSI 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.
Victaulic Co. | |
4901 Kesslersville Road | |
Easton, PA 18040 | |
United States | |
800-742-5842 | |
610-559-3300 | |
Visit this company's website |
Facility : # 1 SS USA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1] [G] |
||||
No. 100 SSLT L.R. 90 Degree Elbow (304L) | 1" - 3" | C. HOT | SS | |
No. 100 SSLT L.R. 90 Degree Elbow (316L) | 1 1/2" - 3" | C. HOT | SS | |
No. 110 SSLT L.R. 45 Degree Elbow (304L) | 1" - 6" | C. HOT | SS | |
No. 110 SSLT L.R. 45 Degree Elbow (316L) | 1" - 4" | C. HOT | SS | |
No. 20 SS Tee (304L) | 1 1/4" - 8" | C. HOT | SS | |
No. 20 SS Tee (316L) | 1 1/2" - 10" | C. HOT | SS | |
No. 420 SS Tee (304L) | 1 1/4" - 8" | C. HOT | SS | |
No. 420 SS Tee (316L) | 1 1/2" - 10" | C. HOT | SS | |
No. 450 SSLT Concentric Reducer (304L) | 1 1/2"x3/4" - 8"x6" | C. HOT | SS | |
No. 450 SSLT Concentric Reducer (316L) | 1 1/2"x1" - 8"x6" | C. HOT | SS | |
No. 451 SSLT Concentric Reducer (304L) | 2"x1 1/2" - 8"x6" | C. HOT | SS | |
No. 451 SSLT Concentric Reducer (316L) | 2" x 1" - 8" x 6" | C. HOT | SS | |
No. 50 SSLT Concentric Reducer (304L) | 1 1/2"x3/4" - 8"x6" | C. HOT | SS | |
No. 50 SSLT Concentric Reducer (316L) | 1 1/2"x1" - 8"x6" | C. HOT | SS | |
No. 51 SSLT Eccentric Reducer (304L) | 2"x1 1/2" - 8"x6" | C. HOT | SS | |
No. 51 SSLT Eccentric Reducer (316L) | 2" x 1" - 8" x 6" | C. HOT | SS | |
No. 60 SS Endcap (304L) | 4" - 6" | C. HOT | SS | |
No. 60 SS Endcap (316L) | 4" - 6" | C. HOT | SS | |
[1] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from schedule 40S Grade 304 or 316 stainless steel pipe. Default fabrication is 10S Grade 304 or 316 stainless steel pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : # 3 SS USA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1] [2] [G] |
||||
No. 60 SS End Cap (304L) | 3/4" - 6" | C. HOT | SS | |
No. 60 SS End Cap (316L) | 1" - 6" | C. HOT | SS | |
No. 460 SS End Cap (304L) | 3/4" - 6" | C. HOT | SS | |
No. 460 SS End Cap (316L) | 1" - 6" | C. HOT | SS | |
[1] Certification is for stainless steel fittings only and does not include the gasketed couplings. [2] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from schedule 40S Grade 304L or 316L stainless steel pipe. Default fabrication is 10S Grade 304L or 316L stainless steel pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : # 4 SS China
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings [G] |
||||
No. 410 SS 90 Degree Elbow[1] | 1" - 1 1/4" | C. HOT | SS | |
No. 411 SS 45 Degree Elbow[1] | 1" - 1 1/4" | C. HOT | SS | |
[1] Certified for stainless steel fittings only and shall not include the gasketed couplings. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : # 5 SS China
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1] [G] |
||||
No. 410 SS 90 Degree Elbow | 1 1/2" - 2 1/2" | C. HOT | SS | |
No. 411 SS 45 Degree Elbow | 1 1/2" - 2 1/2" | C. HOT | SS | |
No. 420 SS Tee | 1 1/2" - 2 1/2" | C. HOT | SS | |
No. 425 SS Reducing Tee | 2" x 1½" - 2½" x 2" | C. HOT | SS | |
No. 450 SS Concentric Reducer | 2" x 1½" - 2½" x 2" | C. HOT | SS | |
No. 460 SS Endcap | 3/4" - 12" | C. HOT | SS | |
[1] Certified for stainless steel fittings only and does not include the gasketed couplings. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : # 6 SS China
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1] [G] |
||||
No. 29 Reducing Tee | 2" x 1" - 10" x 3" | CLD 23 | SS | |
No. 52 Concentric Reducer | 2" x 1" - 6" x 2" | CLD 23 | SS | |
[1] Certified for stainless steel fittings only. Certification does not include the gasketed couplings. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Doraville, GA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Manifolds[G] |
||||
No.26S Vic Outlet Header | 1 1/2"x1" - 12"x12" | CLD 23 | SS | |
No.57S Vic Concentric Reducing Header | 1 1/2"x1" - 12"x12" | CLD 23 | SS | |
No.58S Vic Eccentric Reducing Header | 1 1/2"x1" - 12"x12" | CLD 23 | SS | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Couplings[1] [G] |
||||
Style 230 – Unrestrained | 6" - 144" | CLD 23 | MLTPL | |
Style 232 – Restrained | 6" - 144" | CLD 23 | MLTPL | |
Style 233 – Dynamically Restrained | 6" - 144" | CLD 23 | MLTPL | |
Victaulic Bolted Split Sleeve Couplings | 6" - 144" | CLD 23 | MLTPL | |
[1] Certified for both full circumference and half couplings. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
Fittings [G] |
||||
Anchor Riser[2] | 6" | C. HOT | SS | |
No. 100 SSLT Long Radius 90 Degree Elbow[2] | 3" - 10" | C. HOT | SS | |
No. 110 SSLT Long Radius 45 Degree Elbow[2] | 3" - 10" | C. HOT | SS | |
No. 410 SS 90 Degree Elbow[2] | 3" - 12" | C. HOT | SS | |
No. 411 SS 45 Degree Elbow[2] | 3" - 12" | C. HOT | SS | |
No. 420 SS Tee[2] | 1" - 12" | C. HOT | SS | |
No. 425 SS Redcing Tee Global[2] | 1 1/2"x1" - 12"x10" | C. HOT | SS | |
No. 445 Flanged Adaptor Nipple[3] | 1 1/4" - 12" | C. HOT | SS | |
No. 450 SSLT Concentric Reducer Global[2] | 2 ½" - 2" - 12"x10" | C. HOT | SS | |
No. 451 SSLT Steel Eccentric Red[2] [4] | 4"x2" - 10"x8" | C. HOT | SS | |
No. 460 SS Cap[2] | 5", 8", 10" | C. HOT | SS | |
[2] Certified for stainless steel fittings only and does not include the gasketed couplings. [3] Product trade names may feature suffix "F" or "R" to denote flat (F) or raised ® flange face. [4] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from schedule 40S Grade 304 or 316 stainless steel pipe. Default fabrication is 10S Grade 304 or 316 stainless steel pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
Pipe[2] [4] [G] |
||||
No. 440 SS (Grv x Thd) Adapter Nipple | 1 1/2" x 4"-3" x 4" | C. HOT | SS | |
No. 442 SS (Grv x Bev) Adapter Nipple | 1 1/2" x 4"-8" x 6" | C. HOT | SS | |
No. 443 SS (Grv x Grv) Adapter Nipple | 2" x 4" - 3" x 4" | C. HOT | SS | |
[2] Certified for stainless steel fittings only and does not include the gasketed couplings. [4] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from schedule 40S Grade 304 or 316 stainless steel pipe. Default fabrication is 10S Grade 304 or 316 stainless steel pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Allentown, PA
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[G] |
||||
Victaulic Copper 610 90° Elbow | 2" - 4" | C. HOT | CU | |
Victaulic Copper 652 Concentric Reducer GRV x CUP | 1" - 4" | C. HOT | CU | |
Victaulic Copper 650 Concentric Reducer GRV x GRV | 2" - 4" | C. HOT | CU | |
Victaulic Copper 626 Reducing Tee GRV x GRV x CUP | 2" x 3/4" - 4" x 1½" | C. HOT | CU | |
Victaulic Copper 625 Reducing Tee GRV x GRV x GRV | 2 1/2" - 2" | C. HOT | CU | |
Victaulic Copper 611 45° Elbow | 2" - 5" | C. HOT | CU | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Easton, PA
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Valves [G] |
||||
Series 416 Stainless Steel Check Valve[1] [372] | 2" - 12" | C. HOT | MLTPL | |
Series 702 Butterfly Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
Series 7A2 Butterfly Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
Series 7B2 Butterfly Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
Vic-300 MasterSeal Stainless Steel Butterfly Valve[2] [372] | 2" - 12" | C. HOT | MLTPL | |
[1] Includes Series E416 models. [2] Certification includes Series 461, E461, and 462 models. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [372] Product also complies with NSF/ANSI 372. |
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1] [G] [372] |
||||
Style 422 Mechanical T | 3" x 1 1/2"-8" x 4" | C. HOT | MLTPL | |
[1] Certification includes sealing gasket Grade E EPDM only. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [372] Product also complies with NSF/ANSI 372. |
Facility : Bristol, TN
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[G] |
||||
Aquamine | 2" - 12" | CLD 23 | MLTPL | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
Pipe[G] |
||||
Aquamine PVC 1120 High Impact Pipe | 2" - 12" | CLD 23 | PVC | |
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Richmond Hill, Ontario, Canada
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings [G] |
||||
No. 100 SSLT Long Radius 90 Degree Elbow[1] | 3" - 10" | C. HOT | SS | |
No. 110 SSLT Long Radius 45 Degree Elbow[1] | 3" - 10" | C. HOT | SS | |
No. 410 SS 90 Degree Elbow[1] | 3" - 12" | C. HOT | SS | |
No. 411 SS 45 Degree Elbow[1] | 3" - 12" | C. HOT | SS | |
No. 420 SS Tee[1] | 1" - 12" | C. HOT | SS | |
No. 425 SS Reducing Tee[1] | 1 1/2"x1" - 12"x10" | C. HOT | SS | |
No. 445 Flanged Adaptor Nipple[2] | 1 1/4" - 12" | C. HOT | SS | |
No. 450 SSLT Concentric Reducer Global[1] | 2 ½" - 2" - 12"x10" | C. HOT | SS | |
No. 451 SSLT Steel Eccentric Red[1] [3] | 4"x2" - 10"x8" | C. HOT | SS | |
No. 460 SS Cap[1] | 5", 8", 10" | C. HOT | SS | |
[1] Certified for stainless steel fittings only and does not include the gasketed couplings. [2] Product trade names may feature suffix "F" or "R" to denote flat (F) or raised (R) flange face. [3] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from schedule 40S Grade 304 or 316 stainless steel pipe. Default fabrication is 10S Grade 304 or 316 stainless steel pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
Pipe[1] [3] [G] |
||||
No. 40 SS (Grv x Thd) NPL | 1 1/2" x 4"-3" x 4" | C. HOT | SS | |
No. 42 SS (Grv x Bev) NPL | 1 1/2" x 4"-8" x 6" | C. HOT | SS | |
No. 43 SS (Grv x Grv) NPL | 2" x 4" - 3" x 4" | C. HOT | SS | |
No. 440 SS (Grv x Thd) NPL | 1 1/2" x 4"-3" x 4" | C. HOT | SS | |
No. 442 SS (Grv x Bev) NPL | 1 1/2" x 4"-8" x 6" | C. HOT | SS | |
No. 443 SS (Grv x Grv) NPL | 2" x 4" - 3" x 4" | C. HOT | SS | |
[1] Certified for stainless steel fittings only and does not include the gasketed couplings. [3] Product trade names may feature suffix "H" to denote heavy wall product, fabricated from schedule 40S Grade 304 or 316 stainless steel pipe. Default fabrication is 10S Grade 304 or 316 stainless steel pipe. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Dalian, China
Pipes and Related Products
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Fittings[1] [G] |
||||
No. 410 SS 90 Degree Elbow | 1" - 12" | C. HOT | SS | |
No. 411 SS 45 Degree Elbow | 1" - 12" | C. HOT | SS | |
No. 420 SS Tee | 1 1/2" - 12" | C. HOT | SS | |
No. 425 SS Reducing Tee | 2"x1 1/2" - 12"x10" | C. HOT | SS | |
No. 450 SSLT Concentric Reducer | 2"x1 1/2" - 12"x10" | C. HOT | SS | |
No. 460 SS Caps | 3/4" - 12" | C. HOT | SS | |
[1] Certified for stainless steel fittings only. Certification does not include the gasketed couplings. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Number of matching Manufacturers is 1
Number of matching Products is 89
Processing time was 0 seconds