NSF Product and Service Listings
These NSF Official Listings are current as of Friday, May 17, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=51360&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Ziegler Chemical & Mineral Corp. | |
| 600 Prospect Avenue | |
| Piscataway, NJ 08854 | |
| United States | |
| 732-752-4111 | |
| Visit this company's website |
Facility : Piscataway, NJ
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Coatings - Fittings |
||||
| AA-0344 WB-10[1] | >= 3" | CLD 23 | ASPH | |
| AA-4108 Sealkote HF[2] | >= 3" | CLD 23 | ASPH | |
| AA-4109 Drion FD-5[2] | >= 3" | CLD 23 | ASPH | |
| AA-4117 Dri-Seal HF[2] | >= 3" | CLD 23 | ASPH | |
[1] Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 3 dry
Recoat Cure Time and Temerature: 7 days at 73°F
[2] Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 3
Maximum Thinner: None
Final Cure Time and Temperature: 7 days at 75°F
|
||||
|
Coatings - Pipe |
||||
| AA-0344 WB-10[1] | >= 3" | CLD 23 | ASPH | |
| AA-4108 Sealkote HF[3] | >= 3" | CLD 23 | ASPH | |
| AA-4109 Drion FD-5[3] | >= 3" | CLD 23 | ASPH | |
| AA-4117 Dri-Seal HF[3] | >= 3" | CLD 23 | ASPH | |
[1] Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 3 dry
Recoat Cure Time and Temerature: 7 days at 73°F
[3] Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 3
Recoat Cure Time and Temperature: 7 days at 75°F
|
||||
|
Coatings - Tank |
||||
| AA-0344 WB-10[1] | >= 1000 gal. | CLD 23 | ASPH | |
| AA-4108 Sealkote HF[3] | >= 1000 gal. | CLD 23 | ASPH | |
| AA-4117 Dri-Seal HF[3] | >= 1000 gal. | CLD 23 | ASPH | |
[1] Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 3 dry
Recoat Cure Time and Temerature: 7 days at 73°F
[3] Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 3
Recoat Cure Time and Temperature: 7 days at 75°F
|
||||
|
Coatings - Valve |
||||
| AA-0344 WB-10[1] | >= 3" | CLD 23 | ASPH | |
| AA-4108 Sealkote HF[2] | >= 3" | CLD 23 | ASPH | |
| AA-4109 Drion FD-5[2] | >= 3" | CLD 23 | ASPH | |
| AA-4117 Dri-Seal HF[2] | >= 3" | CLD 23 | ASPH | |
[1] Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 3 dry
Recoat Cure Time and Temerature: 7 days at 73°F
[2] Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 3
Maximum Thinner: None
Final Cure Time and Temperature: 7 days at 75°F
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 15
Processing time was 0 seconds
