NSF Product and Service Listings

These NSF Official Listings are current as of Monday, April 21, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=55560&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.


 
Savard Plumbing Co. 
815 Chestnut Street
North Andover, MA 01845-6098 
United States 
800-828-1300 
661-272-4600
Visit this company's website

Facility : Nogales, Sonara, Mexico

Mechanical Plumbing Devices

Trade Designation      

Flexible Plumbing Connectors
Danco Inc. YYXX[1] [G]      
LFM-(1) (2)[2] [G]      
LFMF (1) (2)[2] [G]      
LFSS ICEMKR YYXX[1] [G]      
LFSteeline YYXX[1] [G]      
LFT-(1) (2)[2] [G]      
LFTF (1) (2)[2] [G]      
LFTufline YYXX[1] [G]      
LFWM (3) (4)[3] [G]      
Lil Q-Wick-E YYXX[1] [G]      
MKXXB[1] [G]      
PRO-FLO PFX YYXX[1] [G]      
Plumbmaster YYXX[1] [G]      
SSDISH 3/8CX3/8CXX[1] [G]      
SSDISH W/Elbow YYXX[4] [G]      
SSDISH YYXX[4] [G]      
SSDSW W/Elbow YYXX[4] [G]      
SSDSW YYXX[4] [G]      
TMS Group YYXX[1] [G]      
Thrifty Supply YYXX[1] [G]      

[1] YY indicates:
    7/8" FBC x 3/8" FCM 
    7/8" FBC x 7/16" FCM 
    7/8" FBC x 1/2" FCM
    7/8" FBC x 1/2" FIP 
    1/4" FCM x 1/4" FCM 
    3/8" FCM X 3/8" Copper
    3/8" FCM x 3/8" FCM 
    3/8" FCM x 1/2" FIP 
    7/16" FCM x 1/2" FIP 
    1/2" FCM x 1/2" FCM 
    1/2" FCM x 1/2" FIP 
    1/2" FIP x 1/2" FIP 
    3/4" FIP x 3/8" FCM 
    3/4" FIP x 1/2" FIP 
    3/8" FL x 1/2" FIP
    XX – Indicates length, maximum of 120" for 0.315" diameter flexible connectors. Maximum
         of 100" for 0.375" diameter flexible connectors.
    Fractional sizes may also appear alone with no description.
[2] LFM  - Stainless steel braid 
    LFMF - M-Series flare 
    LFT  - Polyester exterior braid 
    LFTF - T-Series flare 
    End fitting combination: 
    7/8" FBC x 3/8" FCM 
    7/8" FBC x 7/16" FCM 
    7/8" FBC x 1/2" FCM
    7/8" FBC x 1/2" FIP 
    1/4" FCM x 1/4" FCM 
    3/8" FCM x 3/8" Copper 
    3/8" FCM x 3/8" FCM
    3/8" FCM x 1/2" FIP 
    7/16" FCM x 1/2" FIP 
    1/2" FCM x 1/2" FCM 
    1/2" FCM x 1/2" FIP 
    1/2" FIP x 1/2" FIP 
    3/4" FIP x 3/8" FCM 
    3/4" FIP x 1/2" FIP
    3/8" FL x 1/2" FIP
    (2) Length in inches not to exceed 96" with inner diameter of 0.315" for faucet, dish
    washer and toilet connecters. 
    B  - brass insert (barb)
    BB - brass insert with brass ballcock
[3] (3) End fitting combination: 
        3/4" FIP x 3/4" Comp.     
        3/4" FIP x 3/4" FIP 
        3/4" FIP x 3/4" MIP 
        3/4" MIP x 3/4" Comp. 
    (4) LFWM - Length in feet not to exceed 80" with an inner diameter of 0.375".
[4] YY - 3/8" FMC x 3/8" FMC
    XX - Indicates length, 36" - 48" for 0.315" diameter
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Tubing/Hose [G]
Proline Vinyl Tubing [1] D. HOT MLTPL

[1] Certified for the following maximum lengths for each diameter: 
    331" of 0.125" diameter tubing
    165" of 0.25" diameter tubing 
    131" of 0.315" diameter tubing 
    110" of 0.375" diameter tubing
    66" of 0.625" diameter tubing 
    55" of 0.75 diameter tubing 
    41" of 1" diameter tubing 
    33" of 1.25" diameter tubing
        
    Certified for a maximum SA/V ratio of 130 sq. in./L.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 21
Processing time was 0 seconds