NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, August 20, 2017 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=56240&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Kottmann Technology GmbH 
Lanferkamp, 3
Iserlohn 58638 
Germany 
49 2374 93820


Facility : Iserlohn, Germany

Mechanical Plumbing Devices

Trade Designation      

Kitchen Pull Out Hose[2] [G]
31 150 031 226      
31 175 226 226      

[2] The numeric code in the trade name indicates the following: 
    31  - Aggraf hose DN8 
    226 - G1/2'' conical nut (twist) 
    031 - M15x1 male thread 
    150 - length = 1500mm 
    175 - length = 1750mm 
    31 150 031 226 = Dornbracht-Prod.-No: 09.30.02.057-x 
    31 175 226 226 = Dornbracht-Prod.-No: 09.30.02.03-x
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Flexible Plumbing Connectors[G]
GABBB.CCC.DDD KOTT-GLIDE[3]      
GP8139.585.875 KOTT-GLIDE[4]      
GS6040.805.897[5]      
GS8040.679.1073[9]      
GS8150.716.716[6]      
M6020.897.897 KOTT-FLEX DN6 Poly gray      
M6040.805.897 KOTT-FLEX DN6 V2A braided      
M6043.962.679 KOTT-FLEX DN6 V2A braided      
M6061.805.1000 KOTT-FLEX DN6 V2A braided      
M6061.805.897 KOTT-FLEX DN6 V2A braided      
M6064.898.996 KOTT-FLEX DN6 V2A braided      
M6079.997.998 KOTT-FLEX DN6 V2A braided      
M91139.576.585.1[6]      

[3] G   - KOTT-GLIDE 
    A   - Type of Braiding and Hose diameter 
    S6  - Stainless steel braided DN6
    S8  - Stainless steel braided DN8 
    BBB - Length in centimeters 
    DN6 - up to 77cm
    DN8 - up to 048cm
    CCC - Connection 1 
    DDD - Connection 2 
    Approved Connectors for CCC and DDD: 
    447, 449, 462, 467, 476, 568, 802, 805, 897, 898, 905, 996, 997, 998, 1000
[4] Length of hose (not including fittings) is 54 inches and 0.25 inch diameter.
[5] Certification for GS6040.805.897 does not include o-rings or washers.
[6] M91139.576.585.1:
    M91 - Polyester braided PVC-hose
    576 - O-ring nipple
    585 - G1/2"Conical nut for twist
    139 - length = 1390mm, diameter = 6.5 mm.
    GS8150.716.716
    G   - Kott-glide 2.0 inliner
    S8  - Stainless steel braided DN8 hose
    150 - Length - 1500 mm
    716 - 3/8" Stainless steel hex nut
[9] Certified for a length of 40cm.

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Hose
08.800.650 DN6 KOTT-GLIDE 2.0[7] [G]      
08.800.651 DN8 KOTT-GLIDE 2.0[7] [G]      
08.800.652 DN10 KOTT-GLIDE 2.0[7] [G]      
08.800.653 DN13 KOTT-GLIDE 2.0[7] [G]      
08.800.764 TPE Inliner for DN8[8] [G]      

[7] Certified for DN6, DN8, DN10 and DN13 with a maximum length of 4300 mm.
[8] Certified to 1m length.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] Certified for a length of 17.5" of 0.5" outer diameter tubing.

Number of matching Manufacturers is 1
Number of matching Products is 20
Processing time was 0 seconds