NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=56260&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
F.Q.R. Frattini S.R.L. | |
Via Per Borgomanero No. 71 | |
28024 Briga Novarese (NO) | |
Italy | |
39 0322 94100 | |
Visit this company's website |
Facility : Briga Novarese, Italy
Mechanical Plumbing Devices
Trade Designation | ||||
Flexible Plumbing Connectors[1] [2] [G] [Q] |
||||
Flexible DN10K connector hose[3] | ||||
Flexible DN10KL connector hose[3] | ||||
Flexible DN10KZ connector hose[3] | ||||
Flexible DN10S connector hose[3] | ||||
Flexible DN10SL connector hose[3] | ||||
Flexible DN13K connector hose[4] | ||||
Flexible DN13KL connector hose[4] | ||||
Flexible DN13KZ connector hose[4] | ||||
Flexible DN13S connector hose[4] | ||||
Flexible DN13SL connector hose[4] | ||||
Flexible DN6K connector hose[5] | ||||
Flexible DN6KL connector hose[5] | ||||
Flexible DN6KZ connector hose[5] | ||||
Flexible DN6S connector hose[5] | ||||
Flexible DN6SL connector hose[5] | ||||
Flexible DN6X connector hose[5] | ||||
Flexible DN6XL connector hose[5] | ||||
Flexible DN6XZ connector hose[5] | ||||
Flexible DN8K connector hose[6] | ||||
Flexible DN8KL connector hose[6] | ||||
Flexible DN8KZ connector hose[6] | ||||
Flexible DN8S connector hose[6] | ||||
Flexible DN8SL connector hose[6] | ||||
Flexible DN8X connector hose[6] | ||||
Flexible DN8XL connector hose[6] | ||||
Flexible DN8XZ connector hose[6] | ||||
Flexible DPV8K connector hose[6] | ||||
Flexible DPV8KL connector hose[6] | ||||
Flexible DPV8KZ connector hose[6] | ||||
Flexible DPV8S connector hose[6] | ||||
Flexible DPV8SL connector hose[6] | ||||
Flexible P6K connector hose[5] | ||||
Flexible P6KL connector hose[5] | ||||
Flexible P6KZ connector hose[5] | ||||
Flexible P6S connector hose[5] | ||||
Flexible P6SL connector hose[5] | ||||
Flexible P9K connector hose[6] | ||||
Flexible P9KL connector hose[6] | ||||
Flexible P9KZ connector hose[6] | ||||
Flexible P9S connector hose[6] | ||||
Flexible P9SL connector hose[6] | ||||
[3] Models that have an inner diameter of 10 mm (DN10) DN10K, DN10S Fittings: F1/2, F3/8, F9/16, F 1/2NPSM, F3/4, F3/4NPSM, F3/4NH DN10KL, DN10KZ, DN10SL Fittings: F1/2, F3/8, F9/16, F1/2NPSM, F3/4, F3/4NPSM, F3/4NH, M1/2NPT [4] Models that have an inner diameter of 12.5 mm (DN13) Fittings: F1/2, F1/2NPSM, F3/4, F3/4NPSM, F3/4NH [5] Connectors have an inner diameter of 6 mm (DN6) DN6K, DN6S, DN6X Fittings: F ½ c/gom, F15x1, F3/8, F3/8 c/gom, FIP ½, O9.5 C.O. compression, 010 C.O. compression, 010 C.G. compression, 15x1 Male, FC1/2 Female, FM1/4 NPSM Female, F1/2 Female, Cod. ½(xFC1/2), F9/16 c/gom Female, 8x1C Male, 10x1C Male, 12x1P Male, 14x1Male, F14x1 Female, 15x1Gir DN6KL, DN6KZ, DN6SL, DN6XL, DN6XZ, P6KL, P6KZ, P6SL Fittings: 8x0,75 HR Male, T8, M1/2, F3/8 Bend, F1/2 Bend, F15x1, F3/8, F3/4 NH c/gom, F3/8 c/gom, FIP ½, M1/2 NPT, T10 “Tube”, ½, O9.5 C.O. compression, 010 C.O. compression, 010 C.G. compression, 15x1 Male, FC1/2 Female, FM1/4 NPSM, FCAM ½ Female, FCA ½ Female, F1/2 Female, Cod. ½ (xFC1/2), Cod. 1/2GIR (XFCA1/2), F9/16 Female, F9/16 Female c/gom, 8x1C Male, 8x1L Male, 10x1C Male, 10x1L Male, 10x1 LAV Male, 11x1CC Male, 11x1Z Male, 12x1P Male, 14x1 Male, 15x1V Male, 15x1Gir Male, M3/8, IRF + IRB*, F1/2 c/gom, F14x1 Female P6K, P6S Fittings: F1/2 c/gom, F15x1, F3/8, F3/8 c/gom, FIP ½, O9.5 C.O. compression, 010 C.O. compression, 010 C.G. compression, 15x1 Male, FC1/2 Female, FM1/4 NPSM, FCAM ½ Female, FCA ½ Female, F1/2 Female, Cod. ½ (xFC1/2), Cod. 1/2GIR (XFCA1/2), F9/16 Female, F9/16 Female c/gom, 8x1C Male,10x1C Male, 11x1CC Male, 11x1Z Male, 12x1P Male, 14x1 Male, F14x1 Female, 15x1V Male, 15x1Gir Male, M3/8, IRF + IRB* *Note: Connectors combined using the IRF + IRB connection fitting must remain within the listed minimum and maximum length restrictions. [6] Connectors have an inner diameter of 8 mm (DN8) DN8K, DN8S, DN8X Fittings: F ½ c/gom, F15x1, F3/8, F3/8 c/gom, FIP ½, O9.5 C.O. compression, 010 C.O. compression, 010 C.G. compression, 15x1 Male, FC1/2, FM1/4 NSPM Female, FCAM ½ Female, FCA ½ Female, F1/2 Female, Cod. ½ (xFC1/2), Cod. 1/2GIR (XFCA1/2), T8, F9/16 Female, F9/16 c/gom Female, 8x1C Male, 10x1C Male, 11x1CC Male, 11x1Z male, 12x1P Male, 14x1 Male, F14x1 Female, 15x1Gir Male DN8KL, DN8KZ, DN8SL, DN8XL, DN8XZ, DPV8KL, DPV8KZ, DPV8SL, P9KL, P9KZ, P9SL Fittings: 10x1 HR Male, M1/2, NPB ½ Male, F3/8 Bend, F1/2 Bend, F1/2 c/gom, F15x1, F3/8, F3/4 NH C/gom, F3/8 c/gom, FIP ½, M ½ NPT, T8, T10 “Tube”, O9.5 C.O. compression, 010 C.O. compression, 010 C.G. compression, 15x1 Male, FC1/2, FM1/4 NSPM Female, FCAM ½ Female, FCA ½ Female, F1/2 Female, Cod. ½ (xFC1/2), Cod. 1/2GIR (XFCA1/2), F9/16 Female, F9/16 c/gom Female, 10x1C Male, 10x1L Male, 10x1 LAV (not to be used with 10x1L Male), 11x1CC Male, 11x1Z, 12x1P, 14x1 Male, F14x1 Female, 15x1V Male, 15x1Gir, T 9.5, M3/8, IRF + IRB* DPV8K, DPV8S, P9K, P9S Fittings: F1/2 c/gom, F15x1, F3/8, F3/8 c/gom, FIP ½, O9.5 C.O. compression, 010 C.O. compression, 010 C.G. compression, 15x1 Male, FC1/2, FM1/4 NSPM Female, FCAM ½ Female, FCA ½ Female, F1/2 Female, Cod. ½ (xFC1/2), Cod. 1/2GIR (XFCA1/2), T8, F9/16 Female, F9/16 c/gom, 8x1C Male, 10x1C Male, 11x1CC Male, 11x1Z Male, 12x1P Male, 14x1 Male, F14x1 Female, 15x1V Male, 15x1Gir Male, M3/8, IRF + IRB* *Note: Connectors combined using the IRF + IRB connection fitting must remain within the listed minimum and maximum length restrictions |
||||
[1] All products have trade names that contain the following descriptors that appear in the following order ABCDEF: A. External Covering: DN – Stainless Steel Braiding DPV – Stainless Steel Braiding with rubber coating P - Nylon B. Internal Diameters: 6 - DN6 8 – DN8 9 – DN8 10 – DN10 13 – DN13 C. Inliner Material: K - Silicone S - EPDM X – PE D. End Connection Material Type: Blank, L, or Z E. Fittings: Fitting options as follows: see [2] [3] [4] [5] [2] F. Length Maximum Length Restrictions are as follows: Flexible Connector Hose models made with material K: DN6 – 2500 mm (98 in) DN8 – 2032 mm (80 in) DN10 – 1600 mm (63 in) DN13 – 1250 mm or (49 in) Flexible Connector Hose models made with material S: DN6 – 2032mm (80 in) DN8 – 1524mm (60 in) DN10 – 1194 mm (47 in) DN13 – 914 mm (36 in) Flexible Hose models made with material X: DN6 – 2032mm (80 in) DN8 – 1524mm (60 in) Minimum Length Restrictions: All trade names, except those ending in L or Z, are subject to the following minimum length restrictions: DN6 - 459 mm (18 in) DN8 - 440 mm (17.3 in) P6 - 764 mm (30 in) P9, DPV8 - 573 mm (22.5 in) DN10, DN13 - 320 mm (12.6 in) Models using end connections with L or Z in the name do not have minimum length restrictions. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. |
Number of matching Manufacturers is 1
Number of matching Products is 41
Processing time was 0 seconds