NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, August 06, 2020 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=58530&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Henry Company 
999 North Sepulveda Boulevard
Suite 800 
El Segundo, CA 90245 
United States 
800-486-1278 
310-955-9200


Facility : Indianapolis, IN

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
Henry HE 027 Asphalt Emulsion for Ductile Iron Pipe and Fittings[1] >= 2" CLD 23 ASPH
Henry HE 027051 Asphalt Emulsion for Ductile Iron Pipe and Fittings[1] >= 2" CLD 23 ASPH

[1] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 60°F - 150°F
    Special Comments: Drying recommendations equivalent to air flow as supplied by 12,000
    CFM fan.

Coatings - Pipe
Henry HE 027 Asphalt Emulsion for Ductile Iron Pipe and Fittings[1] >= 3" CLD 23 ASPH
Henry HE 027051 Asphalt Emulsion for Ductile Iron Pipe and Fittings[1] >= 3" CLD 23 ASPH

[1] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 60°F - 150°F
    Special Comments: Drying recommendations equivalent to air flow as supplied by 12,000
    CFM fan.

Coatings - Tank
Henry HE 027 Asphalt Emulsion for Ductile Iron Pipe and Fittings[1] >= 3000 gal. CLD 23 ASPH
Henry HE 027051 Asphalt Emulsion for Ductile Iron Pipe and Fittings[1] >= 3000 gal. CLD 23 ASPH

[1] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 60°F - 150°F
    Special Comments: Drying recommendations equivalent to air flow as supplied by 12,000
    CFM fan.

Coatings - Valve
Henry HE 027 Asphalt Emulsion for Ductile Iron Pipe and Fittings[1] >= 2" CLD 23 ASPH
Henry HE 027051 Asphalt Emulsion for Ductile Iron Pipe and Fittings[1] >= 2" CLD 23 ASPH

[1] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 60°F - 150°F
    Special Comments: Drying recommendations equivalent to air flow as supplied by 12,000
    CFM fan.



Facility : Kimberton, PA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings[1]
Henry HE 027 Asphalt Emulsion for Ductile Iron Pipe and Fittings[2] >= 2" CLD 23 ASPH
Henry HE 027051 Asphalt Emulsion for Ductile Iron Pipe and Fittings[2] >= 2" CLD 23 ASPH

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 60°F - 150°F 
    Special Comments: Drying recommendations equivalent to air flow as supplied by 12,000
    CFM fan.

Coatings - Pipe[1]
Henry HE 027 Asphalt Emulsion for Ductile Iron Pipe and Fittings[2] >= 3" CLD 23 ASPH
Henry HE 027051 Asphalt Emulsion for Ductile Iron Pipe and Fittings[2] >= 3" CLD 23 ASPH

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 60°F - 150°F 
    Special Comments: Drying recommendations equivalent to air flow as supplied by 12,000
    CFM fan.

Coatings - Tank[1]
Henry HE 027 Asphalt Emulsion for Ductile Iron Pipe and Fittings[2] >= 3000 gal. CLD 23 ASPH
Henry HE 027051 Asphalt Emulsion for Ductile Iron Pipe and Fittings[2] >= 3000 gal. CLD 23 ASPH

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 60°F - 150°F 
    Special Comments: Drying recommendations equivalent to air flow as supplied by 12,000
    CFM fan.

Coatings - Valve[1]
Henry HE 027 Asphalt Emulsion for Ductile Iron Pipe and Fittings[2] >= 2" CLD 23 ASPH
Henry HE 027051 Asphalt Emulsion for Ductile Iron Pipe and Fittings[2] >= 2" CLD 23 ASPH

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 4
    Maximum Thinner: None
    Final Cure Time and Temperature: 7 days at 60°F - 150°F 
    Special Comments: Drying recommendations equivalent to air flow as supplied by 12,000
    CFM fan.



Facility : Houston, TX

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Sealants
Synko-Flex®[1] [2] CLD 23 ASPH
Synko-Flex® EMULSION PRIMER[3] [4] CLD 23 ASPH
Synko-Flex® PRIMER[3] [4] CLD 23 ASPH

[1] Certified for use only in conjunction with Synko-Flex® EMULSION PRIMER or PRIMER.
[2] This product is Certified for a 100,000-gallon tank and greater.  As a water
    stop, it is restricted to use at a surface area to volume ratio of 0.003 square
    inches per liter.
[3] Certified for use only in conjunction with Synko-Flex® Strips.
[4] This product is Certified for a 100,000-gallon tank and greater.


Number of matching Manufacturers is 1
Number of matching Products is 19
Processing time was 0 seconds