NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=71030&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Polynt Composites USA Inc. 
99 East Cottage Avenue
Carpentersville, IL 60110 
United States 
800-322-8103 
847-428-2657
Visit this company's website


Facility : Pensacola, FL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Resin
DION® IMPACT 9102-70 (US)[1] [2] [3] CLD 23 VE 

[1] Please refer to the Polynt Composites USA Inc. Product Bulletin for system requirements.
[2] Colors: N/A
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 10
    Maximum Thinner: N/A
    Cure Time: 2 - 100 hours at ambient temperature
    Final Cure: 4 hours at 160°F followed by 2 hours at 180°F
[3] DION® IMPACT 9102-70 (US) is Certified for use as the resin in coating systems on pipes
    6" and greater and tanks 150 gallons and greater.  It may also be applied as a coating
    system alone.



Facility : Carpentersville, IL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Resin
DION® IMPACT 9102-70 (US)[1] [2] [3] CLD 23 VE 

[1] Please refer to the Polynt Composites USA Inc. Product Bulletin for system requirements.
[2] Colors: N/A
    Number Of Coats: 1
    Maximum Field Use Dry Thickness(in mils): 10
    Maximum Thinner: N/A
    Recoat Cure Time and Temperature: 2-100 hours at ambient temperature
    Final Cure Time/Temperature: 4 hours at 160° F followed by 2 hours at 180° F
[3] Certified for use as the resin in pipes 6" and greater or in tanks 150 gallons and
    greater. It may also be applied as a coating system alone.



Facility : Houston, TX

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Resin[1] [2]
DION® 6631-00 [3] CLD 23 PES 

[1] Please refer to the Polynt Composites USA Inc. Product Bulletin for system requirements.
[2] Number Of Coats: 1
    Maximum Field Use Dry Thickness(in mils): 10 mils
    Recoat Cure Time and Temperature: 2 hours at ambient air temperature
    Final Cure Time/Temperature: 4 hours at 160°F followed by 2 hours at 180°F.
[3] Certified for use as the resin in pipes 6” and greater or in tanks 150 gallons and
    greater.  It may also be applied as a coating system alone.

Number of matching Manufacturers is 1
Number of matching Products is 3
Processing time was 0 seconds