NSF Product and Service Listings

These NSF Official Listings are current as of Monday, December 09, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=71300&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Snyder Industries, Inc. 
6940 O Street
Suite 100 
Lincoln, NE 68510 
United States 
402-467-5221


Facility : Marked Tree, AR

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Storage Tanks
Polyethylene Tanks[1] >= 22 gal. CLD 23 MLTPL

[1] Certification requested for use with the following media at the maximum concentration
    listed below. These products are evaluated by diluting the stored water treatment
    chemical to its maximum use level (MUL), as defined in NSF/ANSI/CAN 60.
    
    Acetic Acid (80%)
    Aluminum Chlorohydrate (100%)
    Aluminum Sulfate (50%)
    Calcium Carbonate (100%)
    Calcium Chloride (30%)
    Chlorine Dioxide (38%)
    Citric acid (100%)
    Copper Sulfate (25%)
    Deionized Water (100%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Chloride (37%)
    Ferrous Sulfate (30%)
    Hydrochloric Acid (37%)
    Hydrofluoric Acid (52%)
    Hydrofluosilicic Acid (30%)
    Hydrogen Peroxide (10%)
    Liquid Ammonium Sulfate (45%)
    Magnesium Chloride (35%)
    Peracetic Acid (30%)
    Phosphoric Acid (75%)
    Poly Aluminum Chloride (100%)
    Polyorthophosphate (100%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (4%)
    Sodium Aluminate (100%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (85%)
    Sodium Chloride (26%)
    Sodium Chlorite (34%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (0.8%)
    Sodium Hypochlorite (15%)
    Sodium Permanganate (40%)
    Sodium Silicate (100%)
    Sulfuric Acid (98%)
    Zinc Orthophosphate (100%)


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Tanks
Potable Water Tank[1] >= 22 gal. CLD 23 PE

[1] Certified colors: black, green, and natural.
    Certification is for tank material and fittings and does not include any gaskets,
    lubricants, or plugs.



Facility : Chowchilla, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Storage Tanks
Polyethylene Tanks[1] >= 22 gal. CLD 23 MLTPL

[1] Certification requested for use with the following media at the maximum concentration
    listed below. These products are evaluated by diluting the stored water treatment
    chemical to its maximum use level (MUL), as defined in NSF/ANSI/CAN 60.
    
    Acetic Acid (80%)
    Aluminum Chlorohydrate (100%)
    Aluminum Sulfate (50%)
    Calcium Carbonate (100%)
    Calcium Chloride (30%)
    Chlorine Dioxide (38%)
    Citric acid (100%)
    Copper Sulfate (25%)
    Deionized Water (100%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Chloride (37%)
    Ferrous Sulfate (30%)
    Hydrochloric Acid (37%)
    Hydrofluoric Acid (52%)
    Hydrofluosilicic Acid (30%)
    Hydrogen Peroxide (10%)
    Liquid Ammonium Sulfate (45%)
    Magnesium Chloride (35%)
    Peracetic Acid (30%)
    Phosphoric Acid (75%)
    Poly Aluminum Chloride (100%)
    Polyorthophosphate (100%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (4%)
    Sodium Aluminate (100%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (85%)
    Sodium Chloride (26%)
    Sodium Chlorite (34%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (0.8%)
    Sodium Hypochlorite (15%)
    Sodium Permanganate (40%)
    Sodium Silicate (100%)
    Sulfuric Acid (98%)
    Zinc Orthophosphate (100%)


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Tanks
Potable Water Tank[1] >= 22 gal. CLD 23 PE

[1] Certified colors: black, green, and natural.
    Certification is for tank material and fittings and does not include any gaskets,
    lubricants, or plugs.



Facility : Merced, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Storage Tanks[1] [2] [G]
AGRO >= 200 gal. CLD 23 MLTPL
CHEM >= 200 gal. CLD 23 MLTPL

[1] Certified for use with the following media at the maximum concentration listed below. 
    These products are evaluated by diluting the stored water treatment chemical to its
    maximum use level (MUL), as defined in NSF/ANSI/CAN 60.
    
    Acetic Acid (80%)
    Aluminum Chlorohydrate (100%)
    Aluminum Sulfate (50%)
    Calcium Carbonate (100%)
    Calcium Chloride (30%)
    Chlorine Dioxide (38%)
    Citric acid (100%)
    Copper Sulfate (25%)
    Deionized Water (100%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Chloride (37%)
    Ferrous Sulfate (30%)
    Hydrochloric Acid (37%)
    Hydrofluoric Acid (52%)
    Hydrofluosilicic Acid (30%)
    Hydrogen Peroxide (10%)
    Liquid Ammonium Sulfate (45%)
    Magnesium Chloride (35%)
    Peracetic Acid (30%)
    Phosphoric Acid (75%)
    Poly Aluminum Chloride (100%)
    Polyorthophosphate (100%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (4%)
    Sodium Aluminate (100%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (85%)
    Sodium Chloride (26%)
    Sodium Chlorite (34%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (0.8%)
    Sodium Hypochlorite (15%)
    Sodium Permanganate (40%)
    Sodium Silicate (100%)
    Sulfuric Acid (98%)
    Zinc Orthophosphate (100%)
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Tanks[1] [G]
AGRO >= 200 gal. CLD 23 MLTPL
AQUA >= 200 gal. CLD 23 MLTPL
CHEM >= 200 gal. CLD 23 MLTPL
Cistern >= 340 gal. CLD 23 MLTPL

[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : Lincoln, NE

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Storage Tanks
Polyethylene Tanks[1] >= 22 gal. CLD 23 MLTPL

[1] Certified for use with the following media at the maximum concentration listed below.
    These products are evaluated by diluting the stored water treatment chemical to its
    maximum use level (MUL), as defined in NSF/ANSI/CAN 60.
    
    Acetic Acid (80%)
    Aluminum Chlorohydrate (100%)
    Aluminum Sulfate (50%)
    Calcium Carbonate (100%)
    Calcium Chloride (30%)
    Chlorine Dioxide (38%)
    Citric acid (100%)
    Copper Sulfate (25%)
    Deionized Water (100%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Chloride (37%)
    Ferrous Sulfate (30%)
    Hydrochloric Acid (37%)
    Hydrofluoric Acid (52%)
    Hydrofluosilicic Acid (30%)
    Hydrogen Peroxide (10%)
    Liquid Ammonium Sulfate (45%)
    Magnesium Chloride (35%)
    Peracetic Acid (30%)
    Phosphoric Acid (75%)
    Poly Aluminum Chloride (100%)
    Polyorthophosphate (100%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (4%)
    Sodium Aluminate (100%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (85%)
    Sodium Chloride (26%)
    Sodium Chlorite (34%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (0.8%)
    Sodium Hypochlorite (15%)
    Sodium Permanganate (40%)
    Sodium Silicate (100%)
    Sulfuric Acid (98%)
    Zinc Orthophosphate (100%)


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Tanks
Potable Water Tank[1] >= 22 gal. CLD 23 PE

[1] Certified colors: black, green, and natural.
    Certification is for tank material and fittings and does not include any gaskets,
    lubricants, or plugs.



Facility : Fort Worth, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Storage Tanks[1] [2] [G]
AGRO >= 200 gal. CLD 23 MLTPL
CHEM >= 200 gal. CLD 23 MLTPL

[1] Certified for use with the following media at the maximum concentration listed below. 
    These products are evaluated by diluting the stored water treatment chemical to its
    maximum use level (MUL), as defined in NSF/ANSI/CAN 60.
    
    Acetic Acid (80%)
    Aluminum Chlorohydrate (100%)
    Aluminum Sulfate (50%)
    Calcium Carbonate (100%)
    Calcium Chloride (30%)
    Chlorine Dioxide (38%)
    Citric acid (100%)
    Copper Sulfate (25%)
    Deionized Water (100%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Chloride (37%)
    Ferrous Sulfate (30%)
    Hydrochloric Acid (37%)
    Hydrofluoric Acid (52%)
    Hydrofluosilicic Acid (30%)
    Hydrogen Peroxide (10%)
    Liquid Ammonium Sulfate (45%)
    Magnesium Chloride (35%)
    Peracetic Acid (30%)
    Phosphoric Acid (75%)
    Poly Aluminum Chloride (100%)
    Polyorthophosphate (100%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (4%)
    Sodium Aluminate (100%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (85%)
    Sodium Chloride (26%)
    Sodium Chlorite (34%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (0.8%)
    Sodium Hypochlorite (15%)
    Sodium Permanganate (40%)
    Sodium Silicate (100%)
    Sulfuric Acid (98%)
    Zinc Orthophosphate (100%)
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : Philippi, WV

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Storage Tanks
Polyethylene Tanks[1] >= 22 gal. CLD 23 MLTPL

[1] Certification requested for use with the following media at the maximum concentration
    listed below. These products are evaluated by diluting the stored water treatment
    chemical to its maximum use level (MUL), as defined in NSF/ANSI/CAN 60.
    
    Acetic Acid (80%)
    Aluminum Chlorohydrate (100%)
    Aluminum Sulfate (50%)
    Calcium Carbonate (100%)
    Calcium Chloride (30%)
    Chlorine Dioxide (38%)
    Citric acid (100%)
    Copper Sulfate (25%)
    Deionized Water (100%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Chloride (37%)
    Ferrous Sulfate (30%)
    Hydrochloric Acid (37%)
    Hydrofluoric Acid (52%)
    Hydrofluosilicic Acid (30%)
    Hydrogen Peroxide (10%)
    Liquid Ammonium Sulfate (45%)
    Magnesium Chloride (35%)
    Peracetic Acid (30%)
    Phosphoric Acid (75%)
    Poly Aluminum Chloride (100%)
    Polyorthophosphate (100%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (4%)
    Sodium Aluminate (100%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (85%)
    Sodium Chloride (26%)
    Sodium Chlorite (34%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (0.8%)
    Sodium Hypochlorite (15%)
    Sodium Permanganate (40%)
    Sodium Silicate (100%)
    Sulfuric Acid (98%)
    Zinc Orthophosphate (100%)


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Tanks
Potable Water Tank[1] >= 22 gal. CLD 23 PE

[1] Certified colors: black, green, and natural.
    Certification is for tank material and fittings and does not include any gaskets,
    lubricants, or plugs.


Number of matching Manufacturers is 1
Number of matching Products is 16
Processing time was 0 seconds