NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, August 27, 2016 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=71950&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Ward Manufacturing, LLC 
115 Gulick Street
P.O. Box 9 
Blossburg, PA 16912-0009 
United States 
570-638-2131


Facility : Blossburg, PA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
45° ELL Class 125 1/2" - 4" C. HOT CI
Y x Y x Y BLK MI 150#ST T[2] 1 1/4" x 1" x 1 1/4" C. HOT MI
Y x Y x Y BLK MI 150#ST T 1 1/4" x 1" x 1 1/4" C. HOT MI
Y x Y GALV MI TEE[1] 3/4" - 4" C. HOT GALV
Y x Y GALV MI TEE 300#[1] 3/4" - 4" C. HOT GALV
Y x Y GALV MI TEE 300# 3/4" - 4" C. HOT GALV
Y x Y GALV MI TEE 3/4" - 4" C. HOT GALV
Y x Y GALV MI STREET TEE[1] 3/4" - 4" C. HOT GALV
Y x Y GALV MI STREET TEE 3/4" - 4" C. HOT GALV
Y x Y GALV MI CPLG[1] 3/4" - 4" C. HOT GALV
Y x Y GALV MI CPLG 300#[1] 3/4" - 4" C. HOT GALV
Y x Y GALV MI CPLG 300# 3/4" - 4" C. HOT GALV
Y x Y GALV MI CPLG 3/4" - 4" C. HOT GALV
Y x Y GALV MI 90 ELL 300#[1] 3/4" - 4" C. HOT GALV
Y x Y GALV MI 90 ELL 300# 3/4" - 4" C. HOT GALV
Y x Y GALV CI TEE[1] 3/4" - 4" C. HOT GALV
Y x Y GALV CI TEE 3/4" - 4" C. HOT GALV
Y x Y GALV CI REDUCER[1] 3/4" - 4" C. HOT GALV
Y x Y GALV CI REDUCER 3/4" - 4" C. HOT GALV
Y x Y GALV CI REDC. FLG[1] 3/4" - 4" C. HOT GALV
Y x Y GALV CI REDC. FLG 3/4" - 4" C. HOT GALV
Y x Y GALV CI FLG TEE[1] 3/4" - 4" C. HOT GALV
Y x Y GALV CI FLG TEE 3/4" - 4" C. HOT GALV
Y x Y GALV CI CROSS[1] 3/4" - 4" C. HOT GALV
Y x Y GALV CI CROSS 3/4" - 4" C. HOT GALV
Y x Y GALV CI 90 ELL[1] 3/4" - 4" C. HOT GALV
Y x Y GALV CI 90 ELL 3/4" - 4" C. HOT GALV
Y x Y GALV CI 125# ECC RED[1] 3/4" - 4" C. HOT GALV
Y x Y GALV CI 125# ECC RED 3/4" - 4" C. HOT GALV
Y x Y BLK MI TEE[2] ½"x½"x3/8"-4"x4"x2" C. HOT MI
Y x Y BLK MI TEE 300#[2] 3/4x3/4x½"-3"x3"x2" C. HOT MI
Y x Y BLK MI TEE 300# 3/4x3/4x½"-3"x3"x2" C. HOT MI
Y x Y BLK MI TEE ½"x½"x3/8"-4"x4"x2" C. HOT MI
Y x Y BLK MI HEX BUSH[2] 1/4"x1/8"- 4"x3 1/2" C. HOT MI
Y x Y BLK MI HEX BUSH 1/4"x1/8"- 4"x3 1/2" C. HOT MI
Y x Y BLK MI FLUSH BUSH[2] 1/4"x1/8"-4"x3 1/2" C. HOT MI
Y x Y BLK MI FLUSH BUSH 1/4"x1/8"-4"x3 1/2" C. HOT MI
Y x Y BLK MI CPLG[2] 1/4" x1/8" - 4"x3" C. HOT MI
Y x Y BLK MI CPLG 300#[2] 3/8"x1/4" - 2"x1" C. HOT MI
Y x Y BLK MI CPLG 300# 3/8"x1/4" - 2"x1" C. HOT MI
Y x Y BLK MI CPLG 1/4" x1/8" - 4"x3" C. HOT MI
Y x Y BLK MI 90 ELL[2] 1/4" x 1/8" - 4" x3" C. HOT MI
Y x Y BLK MI 90 ELL 300#[2] 1/2"x3/8" - 1"x3/4" C. HOT MI
Y x Y BLK MI 90 ELL 300# 1/2"x3/8" - 1"x3/4" C. HOT MI
Y x Y BLK MI 90 ELL 1/4" x 1/8" - 4" x3" C. HOT MI
Y x Y BLK HEX BUSH[2] 1 1/4"x3/4" - 4"x3" C. HOT CI
Y x Y BLK HEX BUSH 1 1/4" x 3/4" - 4x3" C. HOT CI
Y x Y BLK CI TEE[2] 1/2"x3/8"-4"x3 1/2" C. HOT CI
Y x Y BLK CI TEE 1/2"x3/8"-4"x3 1/2" C. HOT CI
Y x Y BLK CI REDUCER[2] 3/4"x1/2"-3"x1 1/2" C. HOT CI
Y x Y BLK CI REDUCER 3/4"x1/2"-3"x1 1/2" C. HOT CI
Y x Y BLK CI FLUSH BUSH[2] 1 1/4" x 3/4"-4" x3" C. HOT CI
Y x Y BLK CI FLUSH BUSH 1 1/4" x 3/4"-4" x3" C. HOT CI
Y x Y BLK CI DBLTAP BUSH[2] 1"x3/4"x3/4"-4"x3" C. HOT CI
Y x Y BLK CI DBLTAP BUSH 1"x3/4"x3/4"-4"x3" C. HOT CI
Y x Y BLK CI CROSS[2] 1 1/4" x 1"-2" x 1" C. HOT CI
Y x Y BLK CI CROSS 1 1/4" x 1" - 2" x1" C. HOT CI
Y x Y BLK CI 90 ELL[2] 3/4"x1/2"-4"x3 1/2" C. HOT CI
Y x Y BLK CI 90 ELL 3/4"x1/2"-4"x3 1/2" C. HOT CI
Y x Y BLK CI 250# TEE[2] 1 1/4"x3/4"-2x1 1/2" C. HOT CI
Y x Y BLK CI 250# TEE 1 1/4"x3/4"-2x1 1/2" C. HOT CI
Y x Y BLK CI 125# ECC RED[2] 3/4" x 1/2"-2" x 1" C. HOT CI
Y x Y BLK CI 125# ECC RED 3/4" x 1/2" -2" x 1" C. HOT CI
Y GLV MI 150# 45 WYE[1] 3/4" - 4" C. HOT GALV
Y GLV MI 150# 45 WYE 3/4" - 4" C. HOT GALV
Y GLV 300# STREET 45 ELBOW[1] 3/4" - 4" C. HOT GALV
Y GLV 300# STREET 45 ELBOW 3/4" - 4" C. HOT GALV
Y GALV MI WASTE NUT[1] 3/4" - 4" C. HOT GALV
Y GALV MI WASTE NUT 3/4" - 4" C. HOT GALV
Y GALV MI TEE[1] 3/4" - 4" C. HOT GALV
Y GALV MI TEE 300#[1] 3/4" - 4" C. HOT GALV
Y GALV MI TEE 300# 3/4" - 4" C. HOT GALV
Y GALV MI TEE 3/4" - 4" C. HOT GALV
Y GALV MI STREET TEE[1] 3/4" - 4" C. HOT GALV
Y GALV MI STREET TEE 3/4" - 4" C. HOT GALV
Y GALV MI ST 90 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV MI ST 90 ELL 300#[1] 3/4" - 4" C. HOT GALV
Y GALV MI ST 90 ELL 300# 3/4" - 4" C. HOT GALV
Y GALV MI ST 90 ELL 3/4" - 4" C. HOT GALV
Y GALV MI ST 45 ELL 3/4" - 4"[1] C. HOT GALV
Y GALV MI ST 45 ELL 3/4" - 4" C. HOT GALV
Y GALV MI RTN BEND[1] 3/4" - 4" C. HOT GALV
Y GALV MI RTN BEND 3/4" - 4" C. HOT GALV
Y GALV MI LOCK NUT[1] 3/4" - 4" C. HOT GALV
Y GALV MI LOCK NUT 3/4" - 4" C. HOT GALV
Y GALV MI HEX BUSH[1] 3/4" - 4" C. HOT GALV
Y GALV MI HEX BUSH 3/4" - 4" C. HOT GALV
Y GALV MI FLUSH BUSH[1] 3/4" - 4" C. HOT GALV
Y GALV MI FLUSH BUSH 3/4" - 4" C. HOT GALV
Y GALV MI FLOOR FLG[1] 3/4" - 4" C. HOT GALV
Y GALV MI FLOOR FLG 3/4" - 4" C. HOT GALV
Y GALV MI EXT PCS[1] 3/4" - 4" C. HOT GALV
Y GALV MI EXT PCS 3/4" - 4" C. HOT GALV
Y GALV MI CROSS[1] 3/4" - 4" C. HOT GALV
Y GALV MI CROSS 300#[1] 3/4" - 4" C. HOT GALV
Y GALV MI CROSS 300# 3/4" - 4" C. HOT GALV
Y GALV MI CROSS 3/4" - 4" C. HOT GALV
Y GALV MI CPLG[1] 3/4" - 4" C. HOT GALV
Y GALV MI CPLG L&R THD[1] 3/4" - 4" C. HOT GALV
Y GALV MI CPLG L&R THD 3/4" - 4" C. HOT GALV
Y GALV MI CPLG 300#[1] 3/4" - 4" C. HOT GALV
Y GALV MI CPLG 300# 3/4" - 4" C. HOT GALV
Y GALV MI CPLG 3/4" - 4" C. HOT GALV
Y GALV MI CAP[1] 3/4" - 4" C. HOT GALV
Y GALV MI CAP 300#[1] 3/4" - 4" C. HOT GALV
Y GALV MI CAP 300# 3/4" - 4" C. HOT GALV
Y GALV MI CAP 3/4" - 4" C. HOT GALV
Y GALV MI C/S PLUG[1] 3/4" - 4" C. HOT GALV
Y GALV MI C/S PLUG 3/4" - 4" C. HOT GALV
Y GALV MI 90 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV MI 90 ELL 300#[1] 3/4" - 4" C. HOT GALV
Y GALV MI 90 ELL 300# 3/4" - 4" C. HOT GALV
Y GALV MI 90 ELL 3/4" - 4" C. HOT GALV
Y GALV MI 45 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV MI 45 ELL 300#[1] 3/4" - 4" C. HOT GALV
Y GALV MI 45 ELL 300# 3/4" - 4" C. HOT GALV
Y GALV MI 45 ELL 3/4" - 4" C. HOT GALV
Y GALV CI TEE[1] 3/4" - 4" C. HOT GALV
Y GALV CI TEE 3/4" - 4" C. HOT GALV
Y GALV CI SQ HD PLUG[1] 3/4" - 4" C. HOT GALV
Y GALV CI SQ HD PLUG 3/4" - 4" C. HOT GALV
Y GALV CI SOLID PLUG[1] 3/4" - 4" C. HOT GALV
Y GALV CI SOLID PLUG 3/4" - 4" C. HOT GALV
Y GALV CI FLOOR FLG[1] 3/4" - 4" C. HOT GALV
Y GALV CI FLOOR FLG 3/4" - 4" C. HOT GALV
Y GALV CI FLG UNION[1] 3/4" - 4" C. HOT GALV
Y GALV CI FLG UNION 3/4" - 4" C. HOT GALV
Y GALV CI FLG TEE[1] 3/4" - 4" C. HOT GALV
Y GALV CI FLG TEE 3/4" - 4" C. HOT GALV
Y GALV CI FLG CROSS[1] 3/4" - 4" C. HOT GALV
Y GALV CI FLG CROSS 3/4" - 4" C. HOT GALV
Y GALV CI FLG 90 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV CI FLG 90 ELL 3/4" - 4" C. HOT GALV
Y GALV CI FLG 45 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV CI FLG 45 ELL 3/4" - 4" C. HOT GALV
Y GALV CI DRG TEE[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG TEE 3/4" - 4" C. HOT GALV
Y GALV CI DRG ST 90 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG ST 90 ELL 3/4" - 4" C. HOT GALV
Y GALV CI DRG ST 45 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG ST 45 ELL 3/4" - 4" C. HOT GALV
Y GALV CI DRG P-TRAP[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG P-TRAP W/O C-OUT[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG P-TRAP W/O C-OUT 3/4" - 4" C. HOT GALV
Y GALV CI DRG P-TRAP 3/4" - 4" C. HOT GALV
Y GALV CI DRG LTTY 90[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG LTTY 90 3/4" - 4" C. HOT GALV
Y GALV CI DRG LT 90 ELLS[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG LT 90 ELLS 3/4" - 4" C. HOT GALV
Y GALV CI DRG LT 45 ELLS[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG LT 45 ELLS 3/4" - 4" C. HOT GALV
Y GALV CI DRG DBLE Y[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG DBLE Y 3/4" - 4" C. HOT GALV
Y GALV CI DRG 90 TY[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG 90 TY 3/4" - 4" C. HOT GALV
Y GALV CI DRG 90 ELLS[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG 90 ELLS 3/4" - 4" C. HOT GALV
Y GALV CI DRG 60 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG 60 ELL 3/4" - 4" C. HOT GALV
Y GALV CI DRG 45 ELLS[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG 45 ELLS 3/4" - 4" C. HOT GALV
Y GALV CI DRG 22-1/2 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG 22-1/2 ELL 3/4" - 4" C. HOT GALV
Y GALV CI DRG 11-1/4 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV CI DRG 11-1/4 ELL 3/4" - 4" C. HOT GALV
Y GALV CI DBLTAP BUSH[1] 3/4" - 4" C. HOT GALV
Y GALV CI DBLTAP BUSH 3/4" - 4" C. HOT GALV
Y GALV CI CROSS[1] 3/4" - 4" C. HOT GALV
Y GALV CI CROSS 3/4" - 4" C. HOT GALV
Y GALV CI COMP FLANG[1] 3/4" - 4" C. HOT GALV
Y GALV CI COMP FLANG 3/4" - 4" C. HOT GALV
Y GALV CI CAP[1] 3/4" - 4" C. HOT GALV
Y GALV CI CAP 3/4" - 4" C. HOT GALV
Y GALV CI C/O PLUG[1] 3/4" - 4" C. HOT GALV
Y GALV CI C/O PLUG 3/4" - 4" C. HOT GALV
Y GALV CI BLIND FLG[1] 3/4" - 4" C. HOT GALV
Y GALV CI BLIND FLG 3"/4" - 4" C. HOT GALV
Y GALV CI 90 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV CI 90 ELL 3/4" - 4" C. HOT GALV
Y GALV CI 45 ELL[1] 3/4" - 4" C. HOT GALV
Y GALV CI 45 ELL 3/4" - 4" C. HOT GALV
Y BLK STEEL HEX SOCKET PLUG[2] 1/8" - 3/4" C. HOT CI
Y BLK STEEL HEX SOCKET PLUG 1/8" - 3/4" C. HOT CI
Y BLK MI WASTE NUT[2] 1/2" - 1" C. HOT MI
Y BLK MI WASTE NUT 1/2" - 1" C. HOT MI
Y BLK MI TEE[2] 1/8" - 4" C. HOT MI
Y BLK MI TEE 300#[2] 1/4 - 3" C. HOT MI
Y BLK MI TEE 300# 1/4" - 3" C. HOT MI
Y BLK MI TEE 1/8" - 4" C. HOT MI
Y BLK MI STREET TEE[2] 3/4" - 2" C. HOT MI
Y BLK MI STREET TEE 3/4" - 2" C. HOT MI
Y BLK MI ST 90 ELL[2] 1/8 - 3" C. HOT MI
Y BLK MI ST 90 ELL 300#[2] 1/4" - 2" C. HOT MI
Y BLK MI ST 90 ELL 300# 1/4" - 2" C. HOT MI
Y BLK MI ST 90 ELL 1/8" - 3" C. HOT MI
Y BLK MI ST 45 ELL[2] 1/8" - 2" C. HOT MI
Y BLK MI ST 45 ELL 1/8" - 2" C. HOT MI
Y BLK MI RTN BEND[2] 1/2" - 1" C. HOT MI
Y BLK MI RTN BEND 1/2" - 1" C. HOT MI
Y BLK MI LOCK NUT[2] 1/8" - 2" C. HOT MI
Y BLK MI LOCK NUT 1/8" - 2" C. HOT MI
Y BLK MI EXT PCS[2] 3/8" - 1" C. HOT MI
Y BLK MI EXT PCS 3/8" - 1" C. HOT MI
Y BLK MI CROSS[2] 1/4" - 2" C. HOT MI
Y BLK MI CROSS 300#[2] 1/2" - 2" C. HOT MI
Y BLK MI CROSS 300# 1/2" - 2" C. HOT MI
Y BLK MI CROSS 1/4" - 2" C. HOT MI
Y BLK MI CPLG[2] 1/8" - 4" C. HOT MI
Y BLK MI CPLG L&R THD[2] 1/2" - 2" C. HOT MI
Y BLK MI CPLG L&R THD 1/2" - 2" C. HOT MI
Y BLK MI CPLG 300#[2] 1/4" - 2" C. HOT MI
Y BLK MI CPLG 300# 1/4" - 2" C. HOT MI
Y BLK MI CPLG 1/8" - 4" C. HOT MI
Y BLK MI CAP[2] 1/8" - 4" C. HOT MI
Y BLK MI CAP 300#[2] 1/4" - 2" C. HOT MI
Y BLK MI CAP 300# 1/4" - 2" C. HOT MI
Y BLK MI CAP 1/8" - 4" C. HOT MI
Y BLK MI 90 ELL[2] 1/8" - 4" C. HOT MI
Y BLK MI 90 ELL 300#[2] 1/4" - 3" C. HOT MI
Y BLK MI 90 ELL 300# 1/4" - 3" C. HOT MI
Y BLK MI 90 ELL 1/8" - 4" C. HOT MI
Y BLK MI 45 WYE[2] 1 1/4" C. HOT MI
Y BLK MI 45 WYE 1 1/4" C. HOT MI
Y BLK MI 45 ELL[2] 1/8" - 4" C. HOT MI
Y BLK MI 45 ELL 300#[2] 1/4" - 2" C. HOT MI
Y BLK MI 45 ELL 300# 1/4" - 2" C. HOT MI
Y BLK MI 45 ELL 1/8" - 4" C. HOT MI
Y BLK MI 300# AI UNION[2] 1/8 - 3 C. HOT MI
Y BLK MI 300# AI UNION 1/8" - 3" C. HOT MI
Y BLK MI 150# AI UNION[2] 1/8" - 3" C. HOT MI
Y BLK MI 150# AI UNION 1/8" - 3" C. HOT MI
Y BLK CI TEE[2] 3/8" -4" C. HOT CI
Y BLK CI TEE 3/8" - 4" C. HOT CI
Y BLK CI SQ HD PLUG[2] 1/2" - 4" C. HOT CI
Y BLK CI SQ HD PLUG 1/2" - 4" C. HOT CI
Y BLK CI SOLID PLUG[2] 1/8" 4" C. HOT CI
Y BLK CI SOLID PLUG 1/8" - 4" C. HOT CI
Y BLK CI HEX COUPLING[2] 1" C. HOT CI
Y BLK CI HEX COUPLING 1" C. HOT CI
Y BLK CI CROSS[2] 1/2" - 1 1/2" C. HOT CI
Y BLK CI CROSS 1/2" - 1 1/2" C. HOT CI
Y BLK CI CAP[2] 2 1/2" - 4" C. HOT CI
Y BLK CI CAP 2 1/2" - 4" C. HOT CI
Y BLK CI C/S PLUG[2] 1/4" - 3 1/2" C. HOT CI
Y BLK CI C/S PLUG 1/4" - 3 1/2" C. HOT CI
Y BLK CI C/O PLUG[2] 1 1/4" - 4" C. HOT CI
Y BLK CI C/O PLUG 1 1/4" - 4" C. HOT CI
Y BLK CI 90 ELL[2] 1/8" - 4" C. HOT CI
Y BLK CI 90 ELL 1/8" - 4" C. HOT CI
Y BLK CI 45 ELL[2] 1/82" - 4" C. HOT CI
Y BLK CI 45 ELL 1/2" - 4" C. HOT CI
Y BLK CI 250# TEE[2] 3/8" - 2-1/2" C. HOT CI
Y BLK CI 250# TEE 3/8" - 2 1/2" C. HOT CI
Y BLK CI 250# 90 ELL[2] 1/2" - 2-1/2" C. HOT CI
Y BLK CI 250# 90 ELL 1/2" - 2-1/2" C. HOT CI
Y BLK CI 250# 45 ELL[2] 1/2" - 2-1/2" C. HOT CI
Y BLK CI 250# 45 ELL 1/2 - 2-1/2 C. HOT CI
Y BLK 300# STREET 45 ELBOW[2] 1 1/4" C. HOT MI
Y BLK 300# STREET 45 ELBOW 1 1/4" C. HOT MI
Waste Nuts Class 150 1/2" - 1" C. HOT MI
Ward Union Iron to Iron Seat Class 300 1/8" - 3" C. HOT MI
Ward Union Iron to Iron Seat Class 150 1/8" - 3" C. HOT MI
45° ELL Class 150 1/8" - 4" C. HOT MI
45° ELL Class 300 1/4" - 2" C. HOT MI
45° Straight ELL Class 250 1/2" - 2 1/2" C. HOT CI
45° Street ELL Class 300 1 1/4" C. HOT MI
45° Y Class 150 1 1/4" C. HOT MI
90° Reducing ELL Class 125 3/4"x1/2"-4"x3 1/2" C. HOT CI
90° Straight ELL Class 125 1/8" - 4" C. HOT CI
90° Straight ELL Class 150 1/8" - 4" C. HOT MI
90° Straight ELL Class 250 1/2" - 2 1/2" C. HOT CI
90° Straight ELL Class 300 1/4" - 3" C. HOT MI
90° Street ELL Class 150 1/8" - 3" C. HOT MI
90° Street ELL Class 300 1/4" - 2" C. HOT MI
Cast Iron 90° Straight ELL Class 125 1/4" - 4" C. HOT CI
Concentric Reducing Coupling Class 125 3/4"x1/2"-3"x1 1/2" C. HOT CI
Cored Plugs Class 125 1/2" - 4" C. HOT CI
Countersunk Plugs Class 125 and 150 1/4" - 3 1/2" C. HOT CI
Coupling, Class 150 Right & Left Thread Coupling 1/2" - 2" C. HOT MI
Coupling, Class 150 Straight Coupling 1/8" - 4" C. HOT MI
Cross Class 150 1/4" - 2" C. HOT MI
Cross Class 300 1/2" - 2" C. HOT MI
Double Tap Tank Bushings (Heavy Type Only) 1"x¾"x¾"-4"x3"x3" C. HOT CI
Eccentric Reducing Coupling Class 125 3/4"x1/2" - 2"x1" C. HOT CI
Extension Pieces Class 150 3/8" - 1 1/4" C. HOT MI
Flush Bushings Class 125 1 1/4"x3/4"-4"x3" C. HOT CI
Flush Bushings Class 150 1/4"x1/8"-4"x3 1/2" C. HOT MI
Hex Head Cleanout Plugs Class 125 1 1/4" - 4" C. HOT CI
Hexagon Bushings Class 125 1 ¼" x ¾" - 4" x 3" C. HOT CI
Hexagon Bushings Class 150 1/4"x1/8"-4"x3 1/2" C. HOT MI
Hexagon Coupling 1" C. HOT CI
Locknuts Class 150 1/8" - 2" C. HOT MI
Pipe Cap Class 125 2 1/2" - 4" C. HOT CI
Pipe Caps Class 150 1/8" - 4" C. HOT MI
Pipe Caps Class 300 1/4" - 2" C. HOT MI
Reducing 90° ELL Class 150 1/4"x1/8" - 4"x3" C. HOT MI
Reducing 90° ELL Class 300 ½"x3/8" - 1"x3/4" C. HOT MI
Reducing Coupling Class 150 1/4"x1/8" - 4"x3" C. HOT MI
Reducing Coupling Class 300 3/8" x ¼" - 2" x 1" C. HOT MI
Reducing Cross Class 125 1 1/4"x1" - 2"x1" C. HOT CI
Reducing Street Tees Class 150 1 1/4" x 1" x 1 1/4" C. HOT MI
Reducing Tee Class 125 1/2"x3/8"-4"x3 1/2" C. HOT CI
Reducing Tee Class 250 1 ¼"x3/4"-2"x1 1/2" C. HOT CI
Reducing Tees Class 150 ½"x½"x3/8"-4"x4"x2" C. HOT MI
Reducing Tees Class 300 ¾"x¾"x½"-3"x3"x2" C. HOT MI
Return Bend Open Class 150 1/2" - 1" C. HOT MI
Solid Plugs Class 125 1/8" - 4" C. HOT CI
Steel Hex Socket Plugs 1/8" - 3/4" C. HOT CI
Straight Coupling Class 300 1/4" - 2" C. HOT MI
Straight Cross Class 125 1/2" - 1 1/2" C. HOT CI
Straight Tee Class 125 3/8" - 4" C. HOT CI
Straight Tee Class 250 3/8" - 2 1/2" C. HOT CI
Straight Tee Class 300 1/4" - 3" C. HOT MI
Straight Tees Class 150 1/8" - 4" C. HOT MI
Street 45° ELL Class 150 1/8" - 2" C. HOT MI
Street Tees Class 150 3/4" - 2" C. HOT MI
Ward Malleable Iron Fittings - Galvanized 3/4" - 4" C. HOT GALV
Ward Cast Iron Fittings - Galvanized 3/4" - 4" C. HOT GALV

[1] C-OUT - CLEANOUT
    DRG - DRAINAGE
    22 1/2 - 22 1/2 DEGREE
    11 1/4 - 11 1/4 DEGREE
    TY - Y TEE
    LTTY - LONG TURN Y TEE
    W/O - WITHOUT
    FLG - FLANGE
    Y - Size in inches
[2] The abbreviations in the trade names refer to:
    125 – CLASS 125 FITTING
    150 – CLASS 150 FITTING
    250 – CLASS 250 FITTING
    300 – CLASS 300 FITTING
    45 – 45 DEGREE
    90 – 90 DEGREE
    BLK - BLACK (Nongalvanized parts)
    BUSH – BUSHING
    C/O – CLEANOUT
    C/S – COUNTERSUNK
    CI – CAST IRON
    C-O – CLEANOUT
    C-OT - CLEANOUT
    CPLG – COUPLING
    DBLTAP – DOUBLETAP TANK BUSHING (HEAVY TYPE ONLY)
    ECC – ECCENTRIC
    ELL – ELBOW
    EXT PCS – EXTENSION PIECE
    GALV - GALVANIZED
    GLV - GALVANIZED
    HEX – HEXAGON
    L&R THD – LEFT & RIGHT HAND THREAD
    MI – MALLEABLE IRON
    RED – REDUCING
    RTN – RETURN
    SQ HD – SQUARE HEAD, (CORED PLUG)
    ST – STREET
    STL – STEEL
    Y – Size in inches
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 318
Processing time was 0 seconds