NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=74370&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Tecnogomma International Spa 
Via Castello, 46
24060 Adrara San Martino (BG) 
Italy 
39 035 933095
Visit this company's website


Facility : Adrara San Martino (BG), Italy

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
TEC N41-70[1] [8] [2] CLD 23 NBR
TECNOGOMMA N1-55[3] [8] [2] C. HOT NBR
TIMO 3-60[4] [8] [5] C. HOT EPDM
TIMO 3-70[4] [8] [5] C. HOT EPDM
TIMO 5-70[4] [8] [5] C. HOT EPDM
TIMO 7-70 [5] C. HOT EPDM
TIMO 7A-70[6] [8] [5] C. HOT EPDM
TIMO-70[4] [8] [5] C. HOT EPDM
WRC-70[7] [8] [5] C. HOT NBR 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.17 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.7 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.14 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.2 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[8] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

O-Rings
TEC N41-70[1] [8] [2] CLD 23 NBR
TECNOGOMMA N1-55[3] [8] [2] C. HOT NBR
TIMO 3-60[4] [8] [5] C. HOT EPDM
TIMO 3-70[4] [8] [5] C. HOT EPDM
TIMO 5-70[4] [8] [5] C. HOT EPDM
TIMO 7 NC-70 [5] C. HOT EPDM
TIMO 7-70 [5] C. HOT EPDM
TIMO 7A-70[6] [8] [5] C. HOT EPDM
TIMO-70[4] [8] [5] C. HOT EPDM
WRC-70[7] [8] [5] C. HOT NBR 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.17 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 1.7 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.14 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 1.2 sq. in./L.
[7] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[8] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.


Mechanical Plumbing Devices

Trade Designation      

O-Rings[2]
TIMO 7 NC-70[1]      
TIMO 7-70[1]       

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.


[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

Gasket/Sealing Materials[2]
TIMO 7-70[1]       

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.


[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.



Facility : Palazzolo Sull'Oglio, Italy

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
TEC S27 R.-60 Rosso [1] C. HOT SLC 

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

O-Rings
TEC S27 R.-60 Rosso [1] C. HOT SLC
TEC S27 R.-70 Red [1] C. HOT SLC 

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

Number of matching Manufacturers is 1
Number of matching Products is 25
Processing time was 0 seconds