NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=80810&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
GE Mao Rubber Industrial Co., Ltd. | |
No. 15, Kung-Yeh East 4th Road | |
Lu-Kang Chen, Changhua Hsien | |
Taiwan | |
886 4 781 0288 | |
Visit this company's website |
Facility : Zhan-Shan City, China
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
E6042AA | [2] | C. HOT | EPDM | |
E6541AA[1] | [2] | C. HOT | EPDM | |
E6541AA internally lubricated[1] | [2] | C. HOT | EPDM | |
E6542AA | [2] | C. HOT | EPDM | |
E7041 AA[1] | [2] | C. HOT | EPDM | |
E7041AA internally lubricated[1] | [2] | C. HOT | EPDM | |
E7042AA | [2] | C. HOT | EPDM | |
E7042AO | [2] | C. HOT | EPDM | |
E7051AA[3] | [2] | C. HOT | EPDM | |
E7141AA[1] | [2] | C. HOT | EPDM | |
E7541AA[1] | [2] | C. HOT | EPDM | |
E7541AA internally lubricated [1] | [2] | C. HOT | EPDM | |
E7542AA | [2] | C. HOT | EPDM | |
E8041AA[1] | [2] | C. HOT | EPDM | |
E8041AA internally lubricated[1] | [2] | C. HOT | EPDM | |
H7045AA[4] | [2] | C. HOT | HNBR | |
H7545AA[4] | [2] | C. HOT | HNBR | |
H8045AA[4] | [2] | C. HOT | HNBR | |
H8545AA[4] | [2] | C. HOT | HNBR | |
N7041 AA[5] | [2] | D. HOT | NBR | |
S4031AB | [2] | C. HOT | SLC | |
S4031AY | [2] | C. HOT | SLC | |
S5031AY | [2] | C. HOT | SLC | |
S5131AB | [2] | C. HOT | SLC | |
S6031AY | [2] | C. HOT | SLC | |
S6131AB | [2] | C. HOT | SLC | |
S7031AB | [2] | C. HOT | SLC | |
S7031AY | [2] | C. HOT | SLC | |
S8031AY | [2] | C. HOT | SLC | |
S8131AB | [2] | C. HOT | SLC | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 2.0 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [3] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 0.3 sq. in./L. [4] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 0.2 sq. in./L. [5] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 0.3 sq. in./L. |
||||
O-Rings |
||||
E6042AA | [2] | C. HOT | EPDM | |
E6541AA[1] | [2] | C. HOT | EPDM | |
E6541AA internally lubricated[1] | [2] | C. HOT | EPDM | |
E6542AA | [2] | C. HOT | EPDM | |
E7041 AA[1] | [2] | C. HOT | EPDM | |
E7041AA internally lubricated[1] | [2] | C. HOT | EPDM | |
E7042AA | [2] | C. HOT | EPDM | |
E7042AO | [2] | C. HOT | EPDM | |
E7051AA[3] | [2] | C. HOT | EPDM | |
E7141AA[1] | [2] | C. HOT | EPDM | |
E7541AA[1] | [2] | C. HOT | EPDM | |
E7541AA internally lubricated[1] | [2] | C. HOT | EPDM | |
E7542AA | [2] | C. HOT | EPDM | |
E8041AA[1] | [2] | C. HOT | EPDM | |
E8041AA internally lubricated[1] | [2] | C. HOT | EPDM | |
H7045AA[4] | [2] | C. HOT | HNBR | |
H7545AA[4] | [2] | C. HOT | HNBR | |
H8045AA[4] | [2] | C. HOT | HNBR | |
H8545AA[4] | [2] | C. HOT | HNBR | |
N7041 AA[5] | [2] | D. HOT | NBR | |
S4031AB | [2] | C. HOT | SLC | |
S4031AY | [2] | C. HOT | SLC | |
S5031AY | [2] | C. HOT | SLC | |
S5131AB | [2] | C. HOT | SLC | |
S6031AY | [2] | C. HOT | SLC | |
S6131AB | [2] | C. HOT | SLC | |
S7031AB | [2] | C. HOT | SLC | |
S7031AY | [2] | C. HOT | SLC | |
S8031AY | [2] | C. HOT | SLC | |
S8131AB | [2] | C. HOT | SLC | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 2.0 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [3] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 0.3 sq. in./L. [4] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 0.2 sq. in./L. [5] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum surface area to volume ratio of 0.3 sq. in./L. |
Mechanical Plumbing Devices
Trade Designation | ||||
Gasket/Sealing Materials |
||||
E6042AA[1] [2] | ||||
E6542AA[1] [2] | ||||
E7042AA[1] [2] | ||||
E7042AO[1] [2] | ||||
E7542AA[1] [2] | ||||
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] This product does not require a Q statistic. It is made from material or materials that do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3. |
||||
O-Rings |
||||
E6042AA[1] [2] | ||||
E6542AA[1] [2] | ||||
E7042AA[1] [2] | ||||
E7042AO[1] [2] | ||||
E7542AA[1] [2] | ||||
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] This product does not require a Q statistic. It is made from material or materials that do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3. |
Facility : Chonburi, Thailand
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
O-Rings, Gasket/Sealing Materials |
||||
E6541AA | [1] [2] | C. HOT | EPDM | |
E6541AA internally lubricated | [1] [2] | C. HOT | EPDM | |
E7041 AA | [1] [2] | C. HOT | EPDM | |
E7041AA internally lubricated | [1] [2] | C. HOT | EPDM | |
E7051 AA | [1] [3] | C. HOT | EPDM | |
E7141AA | [1] [2] | C. HOT | EPDM | |
E7541AA | [1] [2] | C. HOT | EPDM | |
E7541AA internally lubricated | [1] [2] | C. HOT | EPDM | |
E8041AA | [1] [2] | C. HOT | EPDM | |
E8041AA internally lubricated | [1] [2] | C. HOT | EPDM | |
N7041 AA | [1] [4] | D. HOT | NBR | |
V6502 AA[G] | [1] | C. HOT | FE | |
V6502 AC[G] | [1] | C. HOT | FE | |
V6502 AP[G] | [1] | C. HOT | FE | |
V7002 AA[G] | [1] | C. HOT | FE | |
V7002 AC[G] | [1] | C. HOT | FE | |
V7002 AP[G] | [1] | C. HOT | FE | |
V7502 AA[G] | [1] | C. HOT | FE | |
V7502 AC[G] | [1] | C. HOT | FE | |
V7502 AP[G] | [1] | C. HOT | FE | |
V8002 AA[G] | [1] | C. HOT | FE | |
V8002 AC[G] | [1] | C. HOT | FE | |
V8002 AP[G] | [1] | C. HOT | FE | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L. [2] Evaluated as material for use in mechanical plumbing devices for applications with a maximum of 2.0 square inchs per liter. [3] Evaluated as material for use in mechanical plumbing devices for applications with a maximum of 0.4 square inchs per liter. [4] Evaluated as material for use in mechanical plumbing devices for applications with a maximum of 0.6 square inchs per liter. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Mechanical Plumbing Devices
Trade Designation | ||||
Gasket/Sealing Materials[1] [G] |
||||
V6502 AA | ||||
V6502 AC | ||||
V6502 AP | ||||
V7002 AA | ||||
V7002 AC | ||||
V7002 AP | ||||
V7502 AA | ||||
V7502 AC | ||||
V7502 AP | ||||
V8002 AA | ||||
V8002 AC | ||||
V8002 AP | ||||
[1] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
O-Rings[1] [G] |
||||
V6502 AA | ||||
V6502 AC | ||||
V6502 AP | ||||
V7002 AA | ||||
V7002 AC | ||||
V7002 AP | ||||
V7502 AA | ||||
V7502 AC | ||||
V7502 AP | ||||
V8002 AA | ||||
V8002 AC | ||||
V8002 AP | ||||
[1] Certified for a maximum surface area to volume ratio of 2.0 sq.in./L. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Number of matching Manufacturers is 1
Number of matching Products is 117
Processing time was 0 seconds