NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, September 21, 2017 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=81060&Standard=061&


NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.

 
Bermad CS Ltd 
Kibbutz Evron 2280800
Israel 
972 4 985 5311
Visit this company's website


Facility : Victaulic Bermad Technologies (VBT), Houston, TX

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[1] [G]
700 Series Control Valves 1 1/2" - 36" D. HOT MLTPL 

[1] 700 Series Control Valves are Certified for use with these optional control trim
    accessories:
    Pilot PB
    Pilot PA
    Pilot HC
    Self Flushing Filter
    Y-Filter Y10
    Check Valve H 410 SS
    Cock Valve S20
    Needle Valve V6 and V8 Series
    Hydraulic Relay (Amplifier)
    Stainless Steel 316 tubes and fittings
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Kibbutz, Evron, Israel

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves
105-X[2] [G] 1" - 6" CLD 23 MLTPL
110-XX-XX[2] [G] 1" - 2" CLD 23 MLTPL
120-XX-XX[2] [G] 2" - 4" CLD 23 MLTPL
205-X[2] [G] 3/4" - 2" CLD 23 MLTPL
210-XX-XX[2] [G] 3/4" - 2" CLD 23 MLTPL
220-XX-XX[2] [G] 3/4" - 2" CLD 23 MLTPL
350-54[3] [G] 2" - 4" CLD 23 MLTPL
350-55[3] [G] 2" - 4" CLD 23 MLTPL
350-XX[3] [G] 2" - 4" CLD 23 MLTPL
700 Series Control Valves[1] [G] 1 1/2" - 36" D. HOT MLTPL
700EN Series Control Valves[1] [G] 1 1/2" - 36" D. HOT MLTPL
700ES Series Control Valves[1] [G] 1 1/2" - 36" D. HOT MLTPL
70F[G] 1 1/2" - 36" D. HOT MLTPL
70N[G] 1 1/2" - 36" D. HOT MLTPL
800 Series[4] [G] 1 1/2" - 36" D. HOT MLTPL
80F[G] 1 1/2" - 36" D. HOT MLTPL
80N[G] 1 1/2" - 36" D. HOT MLTPL
A30 Series Air Valves[G] 3/4" - 1" CLD 23 MLTPL
A31 Series Air Valves[G] 3/4" - 1" CLD 23 MLTPL
A71 Series Air Valves[G] 3/4" - 1" CLD 23 MLTPL
C30 Series Air Valves[G] 3/4" - 2" CLD 23 MLTPL
C30C Series Air Valves[G] 2" CLD 23 MLTPL
C31 Series Air Valves[G] 2" CLD 23 MLTPL
C70 Series Air Valves[G] 2" - 8" CLD 23 MLTPL
C75 Series Air Valve[G] 3" - 8" CLD 23 MLTPL 

[1] 700, 700ES, and 700EN Series Control Valves are Certified to be used with the following
    optional control trim:
    Male Connector 768L 
    Hex, Nipple 122H 
    Male Elbow 769L 
    Elbow 100H 
    Male Branch Tee 772
    Branch Tee 3600H 
    Tube (SS 316/316L) 
    Pilot PB
    Pilot PA 
    Pilot HC 
    Self Flushing Filter
    Y-Filter Y10 
    Check Valve H 410 SS
    Cock Valve S20
    Needle Valve V6 and V8 Series
    Hydraulic Relay (Amplifier)
[2] For the 100 and 200 Series valves X represents the following:
    2 - Low Pressure (= 2Bar)
    5 - Test Point
    b - Servo Control
    N - Internal Feed
    W - Way of operation (2W=2Way, 3W=3Way
    Z - Manual Selector
    100 and 200 Series valves: Certified for nylon bodies (P), Plastic Tubing & Fittings
    (PP) and EPDM Elastomer Seals & Diaphragm (E1).
[3] For the 350 Series valves:
    54, 55 and XX indicate the way of actuating the valve
    54 - actuation by Hydraulic Accelerator
    55 - actuation by electric solenoid pilot
    XX - other options for external actuation
    350 valves: Certified for nylon bodies (P), Plastic Tubing & Fittings (PP), EPDM
    Elastomer Seals & Diaphragm (E1), and Stainless Steel Seat &
    Shaft (T).
[4] Certified for use with the following optional control trim:
    Male Connector 768L
    Hex, Nipple 122H
    Male Elbow 769L
    Elbow 100H
    Male Branch Tee 772
    Branch Tee 3600H
    Tube (SS 316/316L)
    Pilot PB
    Pilot PA
    Pilot HC
    Self Flushing Filter
    Y-Filter Y10
    Check Valve H 410 SS
    Cock Valve S20
    Needle Valve V6 and V8 Series
    Hydraulic Relay (Amplifier)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 26
Processing time was 0 seconds