NSF Product and Service Listings

These NSF Official Listings are current as of Monday, October 14, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=82830&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Akzo Nobel Powder Coatings GmbH 
Markwiesenstr. 50
D-72770 Reutlingen 
Germany 
49 712 151 9190


Facility : Changzhou, China

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
Resicoat R4-ES HGF04R Red[1] >= 1" D. HOT PEC
Resicoat R4-ES HGF17R Rust Red[2] >= 1" D. HOT PEC
Resicoat R4-ES HJF01R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF10R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF14R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF24R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF42R Blue[1] >= 1" D. HOT PEC

[1] Colors: Blue, Red
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20 mils
    Recoat Cure Time and Temperature: 20 minutes at 428°F
    
[2] Colors: Rust Red
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Final Cure Time and Temperature: 20 minutes at 220°C
    Special comments: Preheat substrate to 200-220°C

Coatings - Valve
Resicoat R4-ES HGF04R Red[1] >= 1" D. HOT PEC
Resicoat R4-ES HGF17R Rust Red[2] >= 1" D. HOT PEC
Resicoat R4-ES HJF01R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF10R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF14R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF24R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF42R Blue[1] >= 1" D. HOT PEC

[1] Colors: Blue, Red
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20 mils
    Recoat Cure Time and Temperature: 20 minutes at 428°F
    
[2] Colors: Rust Red
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Final Cure Time and Temperature: 20 minutes at 220°C
    Special comments: Preheat substrate to 200-220°C



Facility : Reutlingen, Germany

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Sealants
Resicoat Blue Mastic [1] CLD 23 EPOXY

[1] Certified for use in 45 mm pipe and greater.


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
Resicoat R4-ES HAF11R White[1] >= 1" D. HOT PEC
Resicoat R4-ES HGF03R Red-Brown[2] >= 1" D. HOT PEC
Resicoat R4-ES HGF10R Red[2] >= 1" D. HOT PEC
Resicoat R4-ES HJF01R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF10R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF22R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF23R Saphir-Blue[3] >= 1" D. HOT PEC
Resicoat R4-ES HJF57R Blue[4] >= 1" D. HOT PEC
Resicoat R4-FB HGC07R Red-Brown[2] >= 1" D. HOT PEC
Resicoat R4-FB HJC04R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC06R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC08R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC26R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC33R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC36R Saphir-Blue[5] >= 1" D. HOT PEC
Resicoat R8-ES HJF97R Blue[5] >= 1" D. HOT PEC
Resicoat R8-FB HJC37R Blue[5] >= 1 in D. HOT PEC

[1] Colors: Blue, white
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat temperature 200°C - 230°C
[2] Color: Blue, red, red-brown
    Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat temperature 200°C - 230°C
[3] Colors: Blue
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 12
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat temperature 200°C - 230°C
[4] Colors: Blue
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Final Cure Time and Temperature: 20 minutes at 200°C
    Special Comments: Preheat substrate to 180°C - 220°C
[5] Colors: Blue
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: No Thinner
    Final Cure Time and Temperature: 20 minutes at 220°C / 428°F
    Special Comments: Preheat substrate to 200°C - 230°C

Coatings - Pipe
Resicoat R4-ES HAF11R White[1] >= 1" D. HOT PEC
Resicoat R4-ES HGF03R Red-Brown[2] >= 1" D. HOT PEC
Resicoat R4-ES HGF10R Red >= 1" D. HOT PEC
Resicoat R4-ES HJC06R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF01R Blue >= 1" D. HOT PEC
Resicoat R4-ES HJF10R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF22R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF57R Blue[4] >= 1" D. HOT PEC
Resicoat R4-FB HGC07R Red-Brown[2] >= 1" D. HOT PEC
Resicoat R4-FB HJC04R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC08R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC26R Blue >= 1" D. HOT PEC
Resicoat R4-FB HJC33R Blue[1] >= 1" D. HOT PEC

[1] Colors: Blue, white
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat temperature 200°C - 230°C
[2] Color: Blue, red, red-brown
    Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat temperature 200°C - 230°C
[4] Colors: Blue
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Final Cure Time and Temperature: 20 minutes at 200°C
    Special Comments: Preheat substrate to 180°C - 220°C

Coatings - Valve
Resicoat R4-ES HAF11R White[1] >= 1" D. HOT PEC
Resicoat R4-ES HGF03R Red-Brown[2] >= 1" D. HOT PEC
Resicoat R4-ES HGF10R Red[2] >= 1" D. HOT PEC
Resicoat R4-ES HJF01R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF10R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF14R Blue[2] >= 1" D. HOT PEC
Resicoat R4-ES HJF21R Blue[2] >= 1" D. HOT PEC
Resicoat R4-ES HJF22R Blue[1] >= 1" D. HOT PEC
Resicoat R4-ES HJF23R Saphir-Blue[3] >= 1" D. HOT PEC
Resicoat R4-ES HJF57R Blue[4] >= 1" D. HOT PEC
Resicoat R4-FB HGC07R Red-Brown[2] >= 1" D. HOT PEC
Resicoat R4-FB HJC04R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC06R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC08R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC26R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC33R Blue[1] >= 1" D. HOT PEC
Resicoat R4-FB HJC36R Saphir-Blue[5] >= 1" D. HOT PEC
Resicoat R8-ES HJF97R Blue[5] >= 1" D. HOT PEC
Resicoat R8-FB HJC37R Blue[5] >= 1 in D. HOT PEC

[1] Colors: Blue, white
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat temperature 200°C - 230°C
[2] Color: Blue, red, red-brown
    Number of Coats: 1
    Sequence of Coats: N/A
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat temperature 200°C - 230°C
[3] Colors: Blue
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 12
    Maximum Thinner: None
    Final Cure Time and Temperature: 20 minutes at 220°C
    Special Comments: Preheat temperature 200°C - 230°C
[4] Colors: Blue
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Final Cure Time and Temperature: 20 minutes at 200°C
    Special Comments: Preheat substrate to 180°C - 220°C
[5] Colors: Blue
    Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: No Thinner
    Final Cure Time and Temperature: 20 minutes at 220°C / 428°F
    Special Comments: Preheat substrate to 200°C - 230°C


Number of matching Manufacturers is 1
Number of matching Products is 64
Processing time was 0 seconds