NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, October 1, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0000121&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Lübke & Vogt GmbH & Co. KG | |
Hüstener Strasse 43-45 | |
59846 Sundern | |
Germany | |
49 2933 9747 0 | |
Visit this company's website |
Facility : Sundern, Germany
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
0713.23/60[1] | [2] | C. HOT | EPDM | |
0713.23/65[1] | [2] | C. HOT | EPDM | |
0713.23/70[1] | [2] | C. HOT | EPDM | |
0713.23/75[1] | [2] | C. HOT | EPDM | |
0713.23/80[1] | [2] | C. HOT | EPDM | |
0713.23/85[1] | [2] | C. HOT | EPDM | |
EPDM 0713.17/55[1] | [2] | C. HOT | EPDM | |
EPDM 0713.17/60[1] | [2] | C. HOT | EPDM | |
EPDM 0713.17/65[1] | [2] | C. HOT | EPDM | |
EPDM 0713.17/70[1] | [2] | C. HOT | EPDM | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.0 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. |
||||
O-Rings |
||||
0713.23/60[1] | [2] | C. HOT | EPDM | |
0713.23/65[1] | [2] | C. HOT | EPDM | |
0713.23/70[1] | [2] | C. HOT | EPDM | |
0713.23/75[1] | [2] | C. HOT | EPDM | |
0713.23/80[1] | [2] | C. HOT | EPDM | |
0713.23/85[1] | [2] | C. HOT | EPDM | |
EPDM 0713.17/55[1] | [2] | C. HOT | EPDM | |
EPDM 0713.17/60[1] | [2] | C. HOT | EPDM | |
EPDM 0713.17/65[1] | [2] | C. HOT | EPDM | |
EPDM 0713.17/70[1] | [2] | C. HOT | EPDM | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.0 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. |
Number of matching Manufacturers is 1
Number of matching Products is 20
Processing time was 0 seconds