NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0001435&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.


 
Prominent Fluid Controls 
136 Industry Drive
Pittsburgh, PA 15275 
United States 
412-787-2484
Visit this company's website


Facility : Pittsburgh, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Metering Pumps
Beta (BT4B####PVM$)[1] 1/4"x3/16"-1/2"x3/8" CLD 23 MLTPL
Beta (BT4B####PVT$)[1] 1/4"x3/16"-1/2"x3/8" CLD 23 MLTPL
Beta (BT4BXXXXNPE$)[2] 1/4" - 1/2" CLD 23 MLTPL
Beta (BT5B####PVM$)[1] 1/4"x3/16"-1/2"x3/8" CLD 23 MLTPL
Beta (BT5B####PVT$)[1] 1/4"x3/16"-1/2"x3/8" CLD 23 MLTPL
Beta (BT5BXXXXNPE$)[2] 1/4" - 1/2" CLD 23 MLTPL
Concept Plus (CNPAXXXXNPE$)[2] 1/4" - 3/8" CLD 23 MLTPL
Concept Plus (CNPB####PVT2)[1] 1/4"x3/16-3/8"x1/4" CLD 23 MLTPL
Concept Plus (CNPBXXXXNPE$)[2] 1/4" - 3/8" CLD 23 MLTPL
Concept Plus (CNPa####PVT$)[1] 1/4"x3/16"-3/8"x1/4" CLD 23 MLTPL
DFXA0365[4] 1/2" x 3/8" CLD 23 MLTPL
DFXA0518[4] 1/2" - 3/8" CLD 23 MLTPL
DFXA0530[4] 1/2" - 3/8" CLD 23 MLTPL
DFXA0565[4] 1/2" - 3/8" CLD 23 MLTPL
DFXA0730[4] 1/2" - 3/8" CLD 23 MLTPL
Delta (DLTA####PVT2)[1] 1/8"x3/16"-1/2"x1/2" CLD 23 MLTPL
Delta (DLTAXXXXNPE$)[2] 1/2" CLD 23 MLTPL
Gamma/L (GALA####PVT$)[1] 1/4"x3/16"-1/2"x3/8" CLD 23 MLTPL
Gamma/L (GALAXXXXNPE$)[2] 1/4" - 1/2" CLD 23 MLTPL
Gamma/X (GMXA####PVM2)[1] 1/4"x3/16"-1/2"x3/8" CLD 23 MLTPL
Gamma/X (GMXA####PVT2)[1] 1/4"x3/16"-1/2"x3/8" CLD 23 MLTPL
Gamma/X (GMXA####PVT7)[1] 1/4"x3/16"-1/2"x3/8" CLD 23 MLTPL
Gamma/X (GMXAXXXXNPE$)[2] 1/2" CLD 23 MLTPL
Gamma/XL (GXLA####PVM$)[1] [3] CLD 23 MLTPL
Gamma/XL (GXLA####PVT$)[1] [3] CLD 23 MLTPL
Gamma/XL (GXLAXXXXNPE$) [3] CLD 23 MLTPL
Sigma/1 (S1BaH#####PVT@07)[1] 1/2" - 3/4" CLD 23 MLTPL
Sigma/1 (S1CbH#####PVT@07)[1] 1/2" - 3/4" CLD 23 MLTPL
Sigma/2 (S2BaH#####PVT@07)[1] 1/2" - 1" CLD 23 MLTPL
Sigma/2 (S2CbH#####PVT@07)[1] 1/2" - 1" CLD 23 MLTPL
Sigma/3 (S3BaH######PVT@07)[1] 1" - 1 1/2" CLD 23 MLTPL
Sigma/3 (S3CbH######PVT@07)[1] 1" - 1 1/2" CLD 23 MLTPL

[1] #### - Pump version 
           Beta         - 0220, 0232, 0413, 0420, 0708, 0713, 1000, 1008, 1601, 1602, 
                          1604, 2001, 2002, 2504
           Concept Plus - 0215, 0308, 0704, 1000, 1002, 1601, 0309
           Delta        - 0280, 0450, 0730, 1020, 1608, 1612, 2508  
           Gamma/L      - 0220, 0232, 0413, 0420, 0708, 0713, 1000, 1005, 1008, 1601, 
                          1602, 1605  
           Gamma/X      - 1602, 1604, 0708, 1009, 0414, 0715, 0220, 0424
           Gamma/XL     - 0280, 0450, 0730, 1020, 1608, 1612
           Sigma/1      - 04084, 04120, 07042, 07065, 10022, 10044, 10050, 12017, 12035     
    
           Sigma/2      - 04350, 07120, 07220, 16050, 16090, 16130
           Sigma/3      - 040830, 070410, 070580, 120145, 120190, 120270
    $    - Liquid End Version 
           0 - No bleed valve, no valve springs 
           2 - With bleed valve, no valve springs 
           7 - Self bleeding, with groove
    @    - Diaphragm 
           0 - Standard Diaphragm, PTFE Version (Non-Sigma)
           1 - Double Diaphragm with diaphragm rupture indicator (Non-Sigma)
           A - Safety Diaphragm with stop function (Sigma only)
           S - Safety Diaphragm with visual indicator (Sigma only)
    &    - Positive Displacement Element 
           0 - Standard Diaphragm, PTFE Version 
           1 - With membrane rupture signaling
    
    Any codes not specifically indicated in the trade name or listing notes represent
    features that do not affect the parts of the pump in contact with the media. Any
    value(s) are acceptable for these codes.
    Certification does NOT include any accessories (foot valve, injection valve and/or
    tubing). Certification does NOT include the plate valve option for the Sigma/3.
    
    These pumps are approved for use with the following media at the maximum concentrations
    listed below. These products are evaluated by diluting the exposed water treatment
    chemical to its maximum use level (MUL), as defined in NSF/ANSI/CAN 60.
    ACH Aluminum chlorohydrate (40%)
    Aluminum sulfate (50%)
    Ammonium hydroxide (29%)
    Chlorine dioxide (2.0%)
    Ferric chloride (45%)
    Fluorosilicic acid (25%)
    Hydrochloric acid (33%)
    Liquid ammonium Sulfate (40%)
    Phosphoric acid (85%)
    Polyaluminum chloride (45%)
    Potassium permanganate (3%)
    Sodium bisulfite (44%)
    Sodium chlorite (25%)
    Sodium fluoride (4.0%)
    Sodium hydroxide (50%)
    Sodium hypochlorite (15%)
    Sodium permanganate (20%)
    Sulfuric acid (98%)
    Zinc orthophosphate (100%)
[2] XXXX - Pump version 

           Beta         - 0220, 0232, 0413, 0420, 0708, 0713, 1000, 1008, 1601, 

                          1602, 1604, 2001, 2002, 2504

           Concept Plus - 0308, 0215, 0704, 1000, 1002, 1601, 0309

           Delta        - 1020, 1608, 1612, 2508, 0730

           Gamma/L      - 232, 420, 713, 1000, 1005, 1008, 1601, 1602, 1605
, 0708, 0413, 
                          0220
           Gamma/X      - 2504, 1604, 0708, 1009, 0414, 0715, 0220, 0424, 0245, 2002, 1602
           Gamma/XL     - 0730, 1020, 1608, 1612, 2508
    $    - Liquid end version 
           0 - No bleed valve, no valve springs 
           2 - With bleed valve, no valve springs
    
    Any codes not specifically indicated in the trade name or listing notes represent
    features that do not affect the parts of the pump in contact with the media. Any
    value(s) are acceptable for these codes. 
    
    Certification does NOT include any accessories (foot valve, injection valve and/or
    tubing).
    These pumps are Certified for use with the following media at the maximum concentrations
    listed below. These products are evaluated by diluting the exposed water treatment
    chemical to its maximum use level (MUL), as defined in NSF/ANSI/CAN 60. 
    Ammonium hydroxide (29%)
    Liquid Ammonium sulfate (40%)
    Phosphoric acid (50%)
    Polyaluminum chloride (45%)
    Potassium permanganate (3%)
    Sodium fluoride (4.0%)
    Sodium hypochlorite (15%)
    Sodium Permanganate (20%)
[3] 3/8" x 1/4" - 1/2" x 3/8", 5/8", 1/2"
[4] Certified for use with the following media at the maximum concentrations listed below.
    These products are evaluated by diluting the exposed water treatment chemical to its
    maximum use level (MUL), as defined in NSF/ANSI Standard 60.
    
    TPV hose material:
    Aluminum Chloride (50%)
    Aluminum Sulfate (50%)
    Ammonia, aqueous (35%)
    Ammonium Hydroxide (29%)
    Ammonium Sulfate (45%)
    Calcium carbonate (25%)
    Calcium Chloride (30%)
    Calcium Hydroxide (10%)
    Calcium Hypochlorite (15%)
    Copper Sulfate (13%)
    Dipotassium Orthophosphate (50%)
    Disodium Orthophosphate (50%)
    Ferric Chloride (43%)
    Ferric Sulfate (5%)
    Ferrous Chloride (40%)
    Ferrous Sulfate (5%)
    Fluorosilicic acid (25%)
    Hydrochloric Acid (20%)
    Magnesium Sulfate (25%)
    Polyaluminum Chloride (45%)
    Polyaluminum Chlorosulfate (50%)
    Polyaluminum Hydroxychlorosulfate (75%)
    Polyaluminum Silicate Sulfate (66%)
    Polyaluminum Sulfate (50%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (10%)
    Potassium Permanganate (6%)
    Potassium Tripolyphosphate (100%)
    Sodium Acid Pyrophosphate (12%)
    Sodium Aluminate (50%)
    Sodium Ascorbate (60%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfite (50%)
    Sodium Carbonate (7%)
    Sodium Chlorate (45%)
    Sodium Chloride (20%)
    Sodium Chlorite (7.5%)
    Sodium Fluoride (3%)
    Sodium Hydroxide (40%)
    Sodium Hypochlorite (12.2%)
    Sodium Metabisulfite (10%)
    Sodium Percarbonate (7%)
    Sodium Permanganate (6%)
    Sodium Polyphosphates (35%)
    Sodium Silicate (10%)
    Sodium Sulfite (10%)
    Sodium Trimetaphosphate (20%)
    Sodium Tripolyphosphate (15%)
    Tetrasodium Pyrophosphate (7%)
    Tricalcium Phosphate (70%)
    Zinc Chloride (80%)
    Zinc Orthophosphate (100%)
    Zinc Sulfate (36%)
    
    PUR hose material:
    Aluminum Chloride (50%)
    Aluminum Sulfate (50%)
    Ammonia, aqueous (35%)
    Ammonium Hydroxide (10%)
    Ammonium Sulfate (30%)
    Calcium carbonate (25%)
    Calcium Chloride (30%)
    Calcium Hydroxide (10%)
    Calcium Hypochlorite (15%)
    Copper Sulfate (13%)
    Dipotassium Orthophosphate (50%)
    Disodium Orthophosphate (50%)
    Ferric Chloride (43%)
    Ferric Sulfate (5%)
    Ferrous Chloride (40%)
    Ferrous Sulfate (5%)
    Fluorosilicic acid (25%)
    Magnesium Sulfate (25%)
    Poly (Diallyldimethylammonium Chloride)(pDADMAC) (50%)
    Poly Aluminum Chloride (100%)
    Polyacrylamide (2.5%)
    Polyaluminum Chloride (45%)
    Polyaluminum Chlorosulfate (50%)
    Polyaluminum Hydroxychlorosulfate (75%)
    Polyaluminum Silicate Sulfate (66%)
    Polyaluminum Sulfate (50%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (10%)
    Potassium Permanganate (6%)
    Potassium Tripolyphosphate (100%)
    Sodium Acid Pyrophosphate (12%)
    Sodium Aluminate (50%)
    Sodium Ascorbate (60%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfite (50%)
    Sodium Carbonate (7%)
    Sodium Chlorate (45%)
    Sodium Chloride (20%)
    Sodium Chlorite (7.5%)
    Sodium Fluoride (3%)
    Sodium Metabisulfite (10%)
    Sodium Percarbonate (7%)
    Sodium Permanganate (6%)
    Sodium Polyphosphates (35%)
    Sodium Silicate (10%)
    Sodium Sulfite (10%)
    Sodium Trimetaphosphate (20%)
    Sodium Tripolyphosphate (15%)
    Tetrasodium Pyrophosphate (7%)
    Tricalcium Phosphate (70%)
    Zinc Chloride (80%)
    Zinc Orthophosphate (100%)
    Zinc Sulfate (36%)
    
    SEBS hose material:
    Acetic Acid (99%)
    Aluminum Chloride
    Aluminum Sulfate (50%)
    Ammonium Sulfate (30%)
    Calcium Chloride (30%)
    Citric Acid
    Ferric Chloride (43%)
    Ferrous Sulfate (5%)
    Fluoric Acid
    Hydrochloric Acid (38%)
    Hydrofluoric Acid (40-48%)
    Hydrogen Peroxide (90%)
    Magnesium Chloride (35%)
    Nitric Acid (60%)
    Phosphoric Acid (75%)
    Sodium Bicarbonate (7%)
    Sodium Hypochlorite (12%)
    Sulfuric Acid (30%)


Number of matching Manufacturers is 1
Number of matching Products is 32
Processing time was 0 seconds