NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, August 24, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0004919&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| LATI Industria Termoplastici S.P.A. | |
| Via F. Baracca 7 | |
| I-21040 Vedano Olona (VA) | |
| Italy | |
| 39 0332 409321 | |
| Visit this company's website |
Facility : Gornate Olona, Italy
Potable Water Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | End Use | Temp | Material | |
|
Potable Water Materials |
||||
| Latigloss 66 H2 G/50 BLACK:3352F2 | A,F[1] | C. HOT | RNP | |
| Latigloss 66 H2 G/50 NAT.:0003F2 | A,F[1] | C. HOT | RNP | |
[1] Fitting and Appurtenance end use not to exceed 250 sq. in./L. |
||||
Facility : Vedano Olona, Italy
Potable Water Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | End Use | Temp | Material | |
|
Potable Water Materials |
||||
| LARTON G/40 BLACK:3355F1 | A[1] | C. HOT | PSULF | |
| LARTON G/40 NAT. :0169F1 | A[1] | C. HOT | PSULF | |
| Latigloss 57 G/** BLACK:3302F2[2] [3] | A,F[4] | C. HOT | RNP | |
| Latigloss 57 G/** NAT.:0138F2[2] [3] | A,F[4] | C. HOT | RNP | |
[1] Appurtenance end use. Certified for a maximum surface area volume ratio of 250 square
inches/L.
[2] Certified for fitting and appurtenance end use not to exceed 40 sq. in./L.
[3] ** - Fiberglass percentage from 40% to 60%
[4] Fitting and Appurtenance end use not to exceed 250 sq. in./L.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 6
Processing time was 0 seconds
