NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, July 3, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0006258&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Lav. El. Gomma S.R.L. |  |
| Via Aldo Moro, 20/22 | |
| 25033 Cologne (BS) | |
| Italy | |
| 39 030 7050956 | |
| Visit this company's website |
Facility : Cologne (BS), Italy
Joining and Sealing Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Gasket/Sealing Materials |
||||
| 01/B70NBR | [1] | C. HOT | NBR | |
| 01/B80NBR | [1] | C. HOT | NBR | |
| 01/C50VMQ[2] | [3] | C. HOT | SLC | |
| 01/C60VMQ[2] | [3] | C. HOT | SLC | |
| 01/C70VMQ[2] | [3] | C. HOT | SLC | |
| 01/L50VMQ[2] | [3] | C. HOT | SLC | |
| 01/L60VMQ[2] | [3] | C. HOT | SLC | |
| 01/L70VMQ[2] | [3] | C. HOT | SLC | |
| 01/M50VMQ[2] | [3] | C. HOT | SLC | |
| 01/M60VMQ[2] | [3] | C. HOT | SLC | |
| 01/M70VMQ[2] | [3] | C. HOT | SLC | |
| 01/N50VMQ[2] | [3] | C. HOT | SLC | |
| 01/N60VMQ[2] | [3] | C. HOT | SLC | |
| 01/N70VMQ[2] | [3] | C. HOT | SLC | |
| 01/T70FKM | [4] | C. HOT | FE | |
| 01/U60EP[2] | [5] | C. HOT | EPDM | |
| 01/U70EP[2] | [5] | C. HOT | EPDM | |
| 01/U80EP[2] | [5] | C. HOT | EPDM | |
| 01/W70EP[6] | [5] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 0.75 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
with a maximum use restriction of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 0.1 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 10.0 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
with a maximum use restriction of 4 square inches/L.
|
||||
|
O-Rings |
||||
| 01/B70NBR | [1] | C. HOT | NBR | |
| 01/B80NBR | [1] | C. HOT | NBR | |
| 01/C50VMQ[2] | [3] | C. HOT | SLC | |
| 01/C60VMQ[2] | [3] | C. HOT | SLC | |
| 01/C70VMQ[2] | [3] | C. HOT | SLC | |
| 01/L50VMQ[2] | [3] | C. HOT | SLC | |
| 01/L60VMQ[2] | [3] | C. HOT | SLC | |
| 01/L70VMQ[2] | [3] | C. HOT | SLC | |
| 01/M50VMQ[2] | [3] | C. HOT | SLC | |
| 01/M60VMQ[2] | [3] | C. HOT | SLC | |
| 01/M70VMQ[2] | [3] | C. HOT | SLC | |
| 01/N50VMQ[2] | [3] | C. HOT | SLC | |
| 01/N60VMQ[2] | [3] | C. HOT | SLC | |
| 01/N70VMQ[2] | [3] | C. HOT | SLC | |
| 01/T70FKM | [4] | C. HOT | FE | |
| 01/U60EP[2] | [5] | C. HOT | EPDM | |
| 01/U70EP[2] | [5] | C. HOT | EPDM | |
| 01/U80EP[2] | [5] | C. HOT | EPDM | |
| 01/W70EP[6] | [5] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 0.75 sq. in./L.
[2] This product has also been evaluated for use in Mechanical Plumbing Device applications
with a maximum use restriction of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 0.1 sq. in./L.
[5] Certified for a maximum surface area to volume ratio of 10.0 sq. in./L.
[6] This product has also been evaluated for use in Mechanical Plumbing Device applications
with a maximum use restriction of 4 square inches/L.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 38
Processing time was 0 seconds
