NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, January 19, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0052956&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Blue-White Industries, Ltd. 
5300 Business Drive
Huntington Beach, CA 92649 
United States 
714-893-8529
Visit this company's website


Facility : Huntington Beach, CA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
ProSeries MS-6 Chem Sensor[6] 1/2" CLD 23 MLTPL

[6] Certified for use with the following chemicals with TFE/P o-ring:
    
    Acetic Acid (80%)
    Aluminum Chloride (50%)
    Aluminum chlorohydrate (40%)
    Aluminum Chlorohydrate/Polyaluminum Chloride (40%)
    Aluminum Sodium Sulfate (15%)
    Aluminum Sulfate (50%)
    Ammonia, aqueous (35%)
    Ammonium Hydroxide (29%)
    Ammonium Sulfate (45%)
    Calcium carbonate (65%)
    Calcium Chloride (15%)
    Calcium Hydroxide (50%)
    Calcium Hypochlorite (15%)
    Calcium Thiosulfate - (30%)
    Chlorine dioxide (2%)
    Citric Acid (100%) (100%)
    Copper Sulfate (5%)
    Copper Sulfate (25%)
    Deionized Water (100%)
    Dipotassium Orthophosphate (50%)
    Disodium Orthophosphate (50%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Chloride (40%)
    Ferrous Sulfate (30%)
    Fluorosilicic acid (25%)
    Hydrochloric acid (38%)
    Hydrogen Peroxide (30%)
    Magnesium Sulfate (25%)
    Peracetic Acid (10%)
    Phosphoric acid (75%)
    Poly (Diallyldimethylammonium Chloride)(pDADMAC) (50%)
    Poly Aluminum Chloride (100%)
    Polyacrylamide (3%)
    Polyaluminum Chloride (45%)
    Polyaluminum Chlorosulfate (50%)
    Polyaluminum Hydroxychlorosulfate (75%)
    Polyaluminum Silicate Sulfate (66%)
    Polyaluminum Sulfate (50%)
    Polyphosphoric Acid (100%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (45%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (20%)
    Potassium Tripolyphosphate (100%)
    Sodium Acid Pyrophosphate (12%)
    Sodium Aluminate (50%)
    Sodium Ascorbate (60%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfate (50%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (20%)
    Sodium Carbonate (85%)
    Sodium Chlorate - 100%
    Sodium Chloride (26%)
    Sodium Chlorite (7.5%)
    Sodium Dichloroisocyanurate (25%)
    Sodium Fluoride (4.0%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (15%)
    Sodium Metabisulfite (50%)
    Sodium Percarbonate - (15%)
    Sodium Permanganate (40%)
    Sodium Polyphosphates (35%)
    Sodium Silicate (100%)
    Sodium Sulfite (20%)
    Sodium Trimetaphosphate (20%)
    Sodium Tripolyphosphate (15%)
    Sulfur Dioxide (5%)
    Sulfuric acid (99%)
    Tetrapotassium Pyrophosphate (60%)
    Tetrasodium Pyrophosphate (7%)
    Tricalcium Phosphate (70%, slurry)
    Trichloroisocyanuric Acid (10%)
    Ultra Pure Water
    Zinc Chloride (62%)
    Zinc Orthophosphate (100%)
    Zinc Sulfate (36%)
    
    Certified for use with the following chemicals with EPDM o-ring:
    
    Acetic Acid (80%)
    Aluminum Chloride (50%)
    Aluminum Sodium Sulfate (15%)
    Aluminum Sulfate (50%)
    Ammonium Hydroxide (29%)
    Ammonium Sulfate (45%)
    Calcium carbonate (65%)
    Calcium Chloride (15%)
    Calcium Hydroxide (50%)
    Calcium Hypochlorite (15%)
    Calcium Thiosulfate - (30%)
    Citric Acid (100%) (100%)
    Copper Sulfate (5%)
    Copper Sulfate (25%)
    Ferric Chloride (50%)
    Ferric Sulfate (60%)
    Ferrous Sulfate (30%)
    Fluorosilicic acid (25%)
    Hydrochloric acid (38%)
    Hydrogen Peroxide (30%)
    Magnesium Sulfate (25%)
    Peracetic Acid (10%)
    Phosphoric acid (75%)
    Potassium Carbonate (47%)
    Potassium Chloride (34%)
    Potassium hydroxide (45%)
    Potassium Hydroxide (50%)
    Potassium Permanganate (20%)
    Sodium Aluminate (50%)
    Sodium Bicarbonate (100%)
    Sodium Bisulfate (50%)
    Sodium Bisulfite (40%)
    Sodium Carbonate (20%)
    Sodium Carbonate (85%)
    Sodium Chlorate - 100%
    Sodium Chloride (26%)
    Sodium Chlorite (7.5%)
    Sodium Fluoride (4.0%)
    Sodium Hydroxide (50%)
    Sodium Hypochlorite (15%)
    Sodium Percarbonate - (15%)
    Sodium Silicate (100%)
    Sulfur Dioxide (5%)
    Zinc Chloride (62%)
    Zinc Sulfate (36%)
    

Chemical Metering Pumps
Chem-Pro Diaphragm Metering Pump MunicIpal Version MD-ABCDEFGH[1] [2] 1/2" CLD 23 MLTPL
Chem-Pro Diaphragm Metering Pump Municipal Version MC-ABCDEFGH[1] [2] 1/4" - 1/2" CLD 23 MLTPL
FLEX-FLO® A1Nabc-de-f-ghij[3] [4] 1/4" - 7/16" CLD 23 MLTPL
FLEX-PRO® M-abc-de-f[3] [5] 1/4" - 3/4" CLD 23 MLTPL

[1] A - Series
        2 - Smaller overall size (width and length)
        3 - Larger overall size (width and length)
    B - Maximum strokes per minute
    C - Input voltage/power cord
    D - Stroke length/diaphragm size
        1 - .060" stroke/small diaphragm (MC-2) or .060" stroke/large diaphragm (MC-3)
        2 - .060" stroke/large diaphragm (MC-2) or .100" stroke/large diaphragm (MC-3)
        3 - .040" stroke/small diaphragm (MC-2)
        4 - .100" stroke/large diaphragm (MC-2)
        5 - .040" stroke/low flow diaphragm (MC-2)
        6 - .060" stroke/low flow diaphragm (MC-2)
    E - Electrical options
    F - Elastomer material (o-rings)
    V - FKM & TFE/P
    E - EP
    G - Pump head fitting and foot valve
        1 - 1/2" ID x 3/4" OD tubing pump head with 1/2" barb hose footvalve
        2 - 1/4" ID x 3/8" OD tubing pump head with 1/4" foot valve
        3 - 1/2" male NPT inlet and outlet with 1/2" M/NPT footvalve
        4 - 1/2" female NPT inlet and outlet with 1/2" M/NPT footvalve
    H - Miscellaneous options (may be blank)
        A - Hastelloy C check valve balls, PTFE prime valve ball
        B - Single 1/2" ceramic ball and Hastelloy C spring P/head check valve for viscous 
            fluids
        -C1/-C2/-C3/-C4/-C5 - Communications interface
    H - PTFE balls (double ball check valve, prime valve) low viscosity/density fluids 
        only
    J - PTFE balls (single ball with Hastelloy spring check valve, prime valve)
[2] Certified for use with 12.5% sodium hypochlorite or 33% hydrochloric acid. These
    products are evaluated by diluting the exposed water treatment chemical to its maximum
    use level (MUL), as defined in NSF/ANSI Standard 60.
[3] Certified for use with the following chemicals:
    Norprene tubing or Flex-A-Prene™
      Aluminum Chloride - 50%
      Aluminum chlorohydrate (40%) - 40%
      Aluminum Chlorohydrate/Polyaluminum Chloride - 40%
      Aluminum Sodium Sulfate (15%) - 15%
      Aluminum Sulfate (50%) - 50%
      Ammonia, aqueous (35%) - 35%
      Ammonium Hydroxide (29%) - 29%
      Ammonium Sulfate (45%) - 45%
      Calcium carbonate (65%) - 65%
      Calcium Chloride (15%) - 15%
      Calcium Hydroxide - 50%
      Calcium Hypochlorite (15%) - 15%
      Calcium Thiosulfate - 30%
      Chlorine dioxide - 2%
      Copper Sulfate (5%) - 5%
      Copper Sulfate (25%) - 25%
      Deionized Water (100%) - 100%
      Dipotassium Orthophosphate - 50% 
      Disodium Orthophosphate - 50%
      Ferric Chloride (50%) - 50%
      Ferric Sulfate (60%) - 60%
      Ferrous Chloride (40%) - 40%
      Ferrous Sulfate (30%) - 30%
      Fluorosilicic acid - 25%
      Magnesium Sulfate (25%) - 25%
    Poly (Diallyldimethylammonium Chloride)(pDADMAC) - 50%
      Poly Aluminum Chloride (100%) - 100%
      Polyacrylamide (2.5%) - 3%
      Polyaluminum Chloride (45%) - 45%
      Polyaluminum Chlorosulfate - 50%
      Polyaluminum Hydroxychlorosulfate - 75%
      Polyaluminum Silicate Sulfate - 66%
      Polyaluminum Sulfate - 50%
      Potassium Carbonate - 47%
      Potassium Chloride - 34%
      Potassium hydroxide (45%) - 45%
      Potassium Hydroxide (50%) - 50%
      Potassium Permanganate (20%) - 20%
      Potassium Tripolyphosphate - 100%
      Sodium Acid Pyrophosphate - 12%
      Sodium Aluminate - 50%
      Sodium Ascorbate - 60%
      Sodium Bicarbonate - 100%
      Sodium Bisulfate (50%) - 50%
      Sodium Carbonate - 20%
      Sodium Carbonate (85%) - 85%
      Sodium Chlorate - 100%
      Sodium Chloride (26%) - 26%
      Sodium Chlorite (7.5%) - 8%
      Sodium Dichloroisocyanurate - 25%
      Sodium Fluoride (4.0%) - 4%
      Sodium Hydroxide (50%) - 50%
      Sodium Hypochlorite (15%) - 15%
      Sodium Metabisulfite (50%) - 50%
      Sodium Percarbonate - 15%
      Sodium Permanganate (40%) - 40%
      Sodium Polyphosphates - 35%
      Sodium Silicate (100%) - 100%
      Sodium Sulfite (20%) - 20%
      Sodium Trimetaphosphate - 20%
      Sodium Tripolyphosphate - 15%
      Sulfur Dioxide (5%) - 5%
      Tetrapotassium Pyrophosphate - 60%
      Tetrasodium Pyrophosphate - 7%
      Tricalcium Phosphate (70%, slurry) - 70%
      Trichloroisocyanuric Acid- 10%
      Zinc Chloride - 62%
      Zinc Orthophosphate (100%) - 100%
      Zinc Sulfate - 36%
    Norprene Chemical tubing
      Acetic Acid (80%) - 80%
      Citric Acid (100%) - 100%
      Hydrochloric acid (38%) - 38%
      Hydrogen Peroxide - 30%
      Peracetic Acid (10%) - 10%
      Phosphoric acid (75%) - 75%
      Polyphosphoric Acid - 100%
      Sulfuric acid (98.5%) - 99%
    These products are evaluated by diluting the exposed water treatment chemical to its
    maximum use level (MUL), as defined in NSF/ANSI Standard 60.
    
[4] FLEX-FLO® 
    a - 0, 1, 2, or 3 
    b - 0, 1, 2, 5, 6, 7, or 8 
    c - A, P, S, C, E, F, V, X or * 
    d - 4, 6, 7 or 8 
    e - T 
    f - X 
    g - any number 1 through 99 
    h - S M, H or D 
    i - any number 1 through 99 
    j - S M, H or D
[5] FLEX-PRO® 
    a - 2, 3, or 4 
    b - 1,2,3,4, or 5 
    c - 4,5,6,8 or X 
    d - S, M, B, C or X 
    e - ND, NF, NH, NJ, NK, NL, NP, NKL, TH, TK, NEE, NGG, NHH, NHHL, THH, NKKL, N2G or N2E 
    f - R, D, or blank


Number of matching Manufacturers is 1
Number of matching Products is 5
Processing time was 0 seconds