NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, August 24, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0054435&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Corporacion Peruana De Productos Quimicos SA | |
Av. Cesar Vallejo 1851 | |
El Agustino, Lima 10 | |
Peru | |
51 1 6126000 | |
Visit this company's website |
Facility : Lima, Peru
Protective (Barrier) Materials
Water | Water | |||
Water Contact | Contact | Contact | ||
Trade Designation | Size Restriction | Temp | Material | |
Coatings - Tank |
||||
Jet Coat Epoxy[1] | >= 5,000,000 gal. | CLD 23 | EPOXY | |
Jet Pox High Resistant[1] | >= 5,000,000 gal. | CLD 23 | EPOXY | |
[1] Colors: Blanco 1700, Gris Niebla 1680, Aguamarina 1480, Crema 1015 Number of Coats: 2-3 Sequence of Coats: Any combination of Listed colors may be used. Maximum Field Use Dry Film Thickness (in mils): 20 (maximum 10 per coat) Recoat Cure Time and Temperature: 3 hours at 21°C Final Cure Time and Temperature: 10 days at 21°C Special Comments: Mix ratio of Part A:Part B is 4:1 by volume. |
Number of matching Manufacturers is 1
Number of matching Products is 2
Processing time was 0 seconds