NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0057159&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
SEEPEX Inc. 
511 Speedway Drive
Enon, OH 45323 
United States 
937-864-7150
Visit this company's website


Facility : Enon, OH

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Chemical Metering Pumps[1] [2]
Seepex BN SS (1-12)[3] 2" x 1 1/2" CLD 23 MLTPL
Seepex BN SS (1-24)[3] 2 1/2" x 2" CLD 23 MLTPL
Seepex BN SS (10-6L)[3] 3" x 2" CLD 23 MLTPL
Seepex BN SS (15-6LT)[3] 3" x 2" CLD 23 MLTPL
Seepex BN SS (2-12)[3] 2 1/2" x 2" CLD 23 MLTPL
Seepex BN SS (2-24)[3] 3" x 2" CLD 23 MLTPL
Seepex BN SS (2-6L)[3] 2" x 1 1/2" CLD 23 MLTPL
Seepex BN SS (5-12)[3] 3" x 2" CLD 23 MLTPL
Seepex BN SS (5-6L)[3] 2 1/2" x 2" CLD 23 MLTPL
Seepex BN T4 (1-12)[4] 2" x 1 1/2" CLD 23 MLTPL
Seepex BN T4 (1-24)[4] 2 1/2" x 2" CLD 23 MLTPL
Seepex BN T4 (10-6L)[4] 3" x 2" CLD 23 MLTPL
Seepex BN T4 (15-6LT)[4] 3" x 2" CLD 23 MLTPL
Seepex BN T4 (2-12)[4] 2 1/2" x 2" CLD 23 MLTPL
Seepex BN T4 (2-24)[4] 3" x 2" CLD 23 MLTPL
Seepex BN T4 (2-6L)[4] 2" x 1 1/2" CLD 23 MLTPL
Seepex BN T4 (5-12)[4] 3" x 2" CLD 23 MLTPL
Seepex BN T4 (5-6L)[4] 2 1/2" x 2" CLD 23 MLTPL
Seepex MD SS[3] 1" x 1/2" CLD 23 MLTPL
Seepex MD T4[4] 1" x 1/2" CLD 23 MLTPL 

[1] Certified for use with the following media at the maximum concentrations below. These
    products are evaluated by diluting the exposed water treatment chemicals to the typical
    use level (TUL), as defined by NSF/ANSI/CAN 60.
[2] Size shown is inlet x outlet.
[3] MD SS and BN SS:
    Aluminum ammonium sulfate (35%)
    Aluminum Sodium Sulfate (15%)
    Aluminum sulfate (15%)
    Ammonia, aqueous (35%)
    Ammonium sulfate (50%)
    Bentonite (35%)
    Calcium carbonate (65%)
    Calcium chloride (2.5%)
    Calcium Fluoride (0.15%)
    Copper sulfate (5%)
    Fluorosilicic acid (25%)
    Hexafluorosilicic acid (35%)
    Hydrofluorosilicic acid (25%)
    Hydrated Lime (Calcium hydroxide) (0.15%)
    Magnesium hydroxide (12%)
    Magnesium sulfate (25%)
    Polyacrylamide (2.5%)
    Soda Ash (Sodium Carbonate) (22%)
    Sodium bisulfate (30%)
    Sodium Fluoride (5%)
    Sodium Fluorosilicate (6%)
    Sodium hydroxide (50%)
    Sodium metabisulfite (50%)
    Sodium sulfite (20%)
    Sulfur dioxide (5%)
    Tricalcium phosphate (70%, slurry)
[4] MD T4 and BN T4:
    Aluminum sulfate (35%)
    Bentonite (35%)
    Calcium carbonate (65%)
    Calcium chloride (15%)
    Calcium hypochlorite (15%)
    Copper sulfate (5%)
    Ferric chloride (42%)
    Ferrous chloride (40%)
    Magnesium Hydroxide (12%)
    Polyacrylamide (2.5%)
    Potassium permanganate (20%)
    Sodium bisulfate (50%)
    Sodium fluoride (40%)
    Sodium hydroxide (50%)
    Sodium hypochlorite (15%)
    Sodium metabisulfite (50%)
    Sodium silicofluoride (0.004%)
    Sodium sulfite (20%)
    Sulfur dioxide (5%)
    Tricalcium phosphate (70%, slurry)

Number of matching Manufacturers is 1
Number of matching Products is 20
Processing time was 0 seconds