NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, August 24, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0070624&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Hamilton Kent Inc. | |
77 Carlingview Drive | |
Toronto, ON M9W 5E6 | |
Canada | |
416-675-9873 | |
Visit this company's website |
Facility : Toronto, Ontario, Canada
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
Centurion[1] [2] [G] | 4" - 48" | CLD 23 | EPDM | |
Centurion[2] [3] [G] | >= 4" | CLD 23 | MLTPL | |
Centurion[4] [5] | 4" - 48" | CLD 23 | NBR | |
Centurion[2] [6] | 4" - 48" | CLD 23 | IR | |
Centurion[7] [8] | 40" - 60" | CLD 23 | MLTPL | |
Flex 2 Seal[11] | >= 4" | C. HOT | EPDM | |
Flex 3 Seal[11] | >= 4" | C. HOT | EPDM | |
TYLOX O-Ring[9] [10] | >= 14" | CLD 23 | NBR | |
TYLOX O-Ring[12] | >= 14" | CLD 23 | IR | |
TYLOX DDA[2] [3] [G] | 4" - 48" | CLD 23 | MLTPL | |
TYLOX DDA[4] [5] | 4" - 48" | CLD 23 | NBR | |
[1] Includes Compound 800566. [2] Certified for a maximum surface area to volume ratio not to exceed 0.127 sq. in./L. [3] Includes Compound 800366. [4] Certified for a maximum surface area to volume ratio not to exceed 0.4 sq. in./L. [5] Includes Compound 800664. [6] Includes Compound 800369. [7] Certified for a maximum surface area to volume ratio not to exceed 0.013 sq. in./L. [8] Includes compound 800365. [9] Certified for a maximum surface area to volume ratio not to exceed 0.064 sq. in./L. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [10] Includes compound 800667. [11] Certification requested for a maximum surface area to volume ratio not to exceed 1.35 square inches/L. [12] Gaskets are Certified for use in pipes 14" through 27" with a maximum gap of 1/16", 30" to 54" with a maximum gap of 1/8", 60" and greater with a maximum gap of 1/4", or a maximum surface-area-to-volume ratio of 0.005 sq. in./L. Includes gaskets produced using compound 800260 REV.3. |
Number of matching Manufacturers is 1
Number of matching Products is 11
Processing time was 0 seconds