NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, December 26, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0076047&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
A.U.K. Müller GmbH & Co. KG 
Dresdener Str. 162
D-40595 Düsseldorf 
Germany 
49 21 173 910
Visit this company's website


Facility : Düsseldorf, Germany

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Solenoid Valves[G]
10.009.115 Solenoid 3/4" C. HOT MLTPL
10.009.126 Solenoid 3/4" C. HOT MLTPL
62.005.115 Solenoid 3/4" C. HOT MLTPL
62.005.126 Solenoid 3/4" C. HOT MLTPL
62.005.815 Solenoid 3/4" C. HOT MLTPL
62.005.826 Solenoid 3/4" C. HOT MLTPL
62.007.115 Solenoid 3/4" C. HOT MLTPL
62.007.126 Solenoid 3/4" C. HOT MLTPL
62.009.115 Solenoid 3/4" C. HOT MLTPL
62.009.126 Solenoid 3/4" C. HOT MLTPL 

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Valves[G]
52.009.100 3/4" C. HOT MLTPL
52.009.200 3/4" C. HOT MLTPL 

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Mechanical Plumbing Devices

Trade Designation      

Faucet Cartridges[G] [Q]
50.005.800      
50.005.801      
50.005.811      
50.007.801      
50.007.811      
50.009.101      
50.009.801      
50.009.811      
51.005.101 Cartridge Valve      
51.005.101 Cartridge Valve      
T01 50.009.800      
T02 50.009.800       

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

Solenoid Valves[G]
50.005.102 Cartridge Valve[Q]      
50.005.126 bistable 2/2-way solenoid valve[2]       

[2] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.


[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Valves[G] [Q]
50.005.100 Cartridge Valve      
50.005.850      
50.007.101      
50.007.806 Solenoid Cartridge Valve      
51.005.100      
51.005.125       

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.


[1] Certified for models that include: 
    G 1/2 male threads 
    G 3/8 male threaded with G 3/8 female threads 
    G 3/8 male threaded with G 1/2 female threads 
    Model with sockets for customer provided fitting adapters.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
CF-13 2MFC[1] 3/4" x 3/4" x 3/4" D. HOT MLTPL
CF-13 2MFO[1] 1/2" x ¾" x ¾" x ¾" D. HOT MLTPL
CF-17 2MFC[1] 3/4" C. HOT MLTPL
CF-17 2MFO[1] 3/4" C. HOT MLTPL
CF-17 3MFC[1] 3/4" C. HOT MLTPL
CF-17 3MFO[1] 3/4" C. HOT MLTPL
CF-17 C (cross piece)[1] 3/4" C. HOT MLTPL
CF-17 L (L-piece)[1] 3/4" C. HOT MLTPL
CF-17 T (T-piece)[1] 3/4" C. HOT MLTPL
CF-H G Connector 3/4"x1/8"-3/4"x1/4" C. HOT MLTPL
CF-H L 90 deg Elbow Connector 3/4" x 1/2" C. HOT MLTPL
CF-H S Straight Connector 3/4"x3/8"-3/4"x1/2" C. HOT MLTPL 

[1] MFC - are models with capped outlets
    MFO - are models without capped outlets
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 44
Processing time was 0 seconds