NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0086932&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| PPG Industries, Inc. | |
| One PPG Place | |
| Pittsburgh, PA 15272 | |
| United States | |
| 412-434-3131 |
Facility : Brazil, IN
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Coatings - Fittings |
||||
| B13369ER80K[1] | >=2" | CLD 23 | PEC | |
| B14062EB90K[1] | >=2" | CLD 23 | PEC | |
| PCMB50104[1] | >= 2" | CLD 23 | PEC | |
| PCMB60102[1] | >= 2" | CLD 23 | PEC | |
| PCMB60105[1] | >=2" | CLD 23 | PEC | |
[1] Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 20
Final Cure Time and Temperature: 20 minutes at 375°F
|
||||
|
Coatings - Pipe |
||||
| B10889EB90K-C[2] | >= 0.84" | C. HOT | PEC | |
| B10889EB90K-I[2] | >= 0.84" | C. HOT | PEC | |
| B10889EB90K-J[2] | >=0.84" | C. HOT | PEC | |
| PCMB50100[2] | >= 0.84" | C. HOT | PEC | |
| Smith Blair Blue Epoxy[2] | >= 0.84" | C. HOT | PEC | |
[2] Color: Blue
Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 60
Final Cure Time and Temperature: 15 minutes at 380°F
|
||||
|
Coatings - Tank |
||||
| PPG Envirocron PCMT80114[3] | >=84,600 gal. | CLD 23 | PEC | |
[3] Color: White
Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 10
Final Cure Time and Temperature: 10 minutes at 350°F
|
||||
|
Coatings - Valve |
||||
| B13369ER80K[1] | >=2" | CLD 23 | PEC | |
| B14062EB90K[1] | >=2" | CLD 23 | PEC | |
| PCMB50104[1] | >= 2" | CLD 23 | PEC | |
| PCMB60102[1] | >= 2" | CLD 23 | PEC | |
| PCMB60105[1] | >=2" | CLD 23 | PEC | |
[1] Number of Coats: 1
Maximum Field Use Dry Film Thickness (in mils): 20
Final Cure Time and Temperature: 20 minutes at 375°F
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 16
Processing time was 0 seconds
