NSF Product and Service Listings

These NSF Official Listings are current as of Friday, November 28, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0110624&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.


 
Asahi / America, Inc. 
35 Green Street
Malden, MA 02148 
United States 
800-343-3618 
781-321-5409
Visit this company's website

Facility : # 1 Bad Hall, Austria

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
Agru PP-R 45° Elbow 1/2" - 12" C. HOT PP
Agru PP-R 90° Elbow 1/2" - 20" C. HOT PP
Agru PP-R Agru PP-R Socket Stub End 1/2" - 4" C. HOT PP
Agru PP-R Backing Ring 1/2" - 12" C. HOT PP
Agru PP-R Blind Flange 1/2" - 12" C. HOT PP
Agru PP-R Cap 1/2" - 12" C. HOT PP
Agru PP-R Eccentric Reducer+ 1-½"x3/8"-14"x10" C. HOT PP
Agru PP-R Extended Leg 45° Elbow 1/2" - 12" C. HOT PP
Agru PP-R Extended Leg 90° Elbow 1/2" - 12" C. HOT PP
Agru PP-R Extended Leg Concentric Reducer ¾" x ½" - 9" x 6" C. HOT PP
Agru PP-R Extended Leg Eccentric Reducer ¾" x ½" - 8" x 6" C. HOT PP
Agru PP-R Extended Leg End Cap 1/2" - 12" C. HOT PP
Agru PP-R Extended Leg Tee 1/2" - 16" C. HOT PP
Agru PP-R Female Adapter 1/2" - 2" C. HOT PP
Agru PP-R Instrumentation Fitting 1/2" - 4" C. HOT PP
Agru PP-R Laterals 1-1/2" - 16" C. HOT PP
Agru PP-R Laterals with 1/8 Bend 1-1/2" - 16" C. HOT PP
Agru PP-R Machined Concentric Reducer 6" x 4" - 12" x 10" C. HOT PP
Agru PP-R Machined Flush Reducer 2" x ½" - 16" x 14" C. HOT PP
Agru PP-R Machined Instrumentation Fitting 4" - 6" C. HOT PP
Agru PP-R Male Adapter 1/2" - 2" C. HOT PP
Agru PP-R P-TRAP 1-1/2" - 12" C. HOT PP
Agru PP-R Proline x IPS Adapters 1-1/2" - 6" C. HOT PP
Agru PP-R Reducing Laterals 3" x 2" - 12" x 8" C. HOT PP
Agru PP-R Reducing Laterals with 1/8 Bend 3" x 2" - 12" x 8" C. HOT PP
Agru PP-R Reducing Sanitary Tee 3" x 2" - 12" x 8" C. HOT PP
Agru PP-R Reducing Tee 3" x 1" - 10" x 6" C. HOT PP
Agru PP-R Restraint Fitting 1/2" - 4" C. HOT PP
Agru PP-R Sanitary Adapter 1/2" - 2-1/2" C. HOT PP
Agru PP-R Sanitary Tee 2" - 16" C. HOT PP
Agru PP-R Segmented 45° Elbow 4" - 16" C. HOT PP
Agru PP-R Short Eccentric Reducer 10" x 6" - 14" x 10" C. HOT PP
Agru PP-R Socket 45° Elbow 1/2" - 4" C. HOT PP
Agru PP-R Socket 90° Elbow 1/2" - 4" C. HOT PP
Agru PP-R Socket Cap 1/2" - 4" C. HOT PP
Agru PP-R Socket Concentric Reducer ¾" x ½" - 4" x 3" C. HOT PP
Agru PP-R Socket Coupling 1/2" - 4" C. HOT PP
Agru PP-R Socket Female Adapter 1/2" - 2" C. HOT PP
Agru PP-R Socket Reducing Tee ¾" x ½ " - 1-½" x ¾" C. HOT PP
Agru PP-R Socket Tee 1/2" - 4" C. HOT PP
Agru PP-R Socket male Adapter 1/2" - 20" C. HOT PP
Agru PP-R Spigot x Socket Reducer ¾" x ½" - 4" x 3" C. HOT PP
Agru PP-R Stepped Concentric Reducer 2" x 3/8"-24" x 18" C. HOT PP
Agru PP-R Stub End 1/2" - 20" C. HOT PP
Agru PP-R Tee 1/2" - 20" C. HOT PP
PP-Pure™ 45° Elbow 1/2" - 12" C. HOT PP
PP-Pure™ 90° Elbow 10" - 12" C. HOT PP
PP-Pure™ Concentric Reducer ¾" x ½" - 12" x 10" C. HOT PP
PP-Pure™ End Cap 1/2" - 12" C. HOT PP
PP-Pure™ Extended Leg 90° Elbow 1/2" - 9" C. HOT PP
PP-Pure™ Female Adapter 1/2" - 2" C. HOT PP
PP-Pure™ Male Adapter 1/2" - 2" C. HOT PP
PP-Pure™ Restraint Fitting 1/2" - 9" C. HOT PP
PP-Pure™ Sanitary Adapter 1/2" - 2" C. HOT PP
PP-Pure™ Stub End 1/2" - 12" C. HOT PP
PP-Pure™ Tee 1/2" - 12" C. HOT PP
Proline® Pro150 45° Elbow 1/2" - 12" C. HOT PP
Proline® Pro150 90° Elbow 1/2" - 20" C. HOT PP
Proline® Pro150 Backing Ring 1/2" - 12" C. HOT PP
Proline® Pro150 Blind Flange 1/2" - 12" C. HOT PP
Proline® Pro150 Cap 1/2" - 12" C. HOT PP
Proline® Pro150 Eccentric Reducer+ 1 ½"x3/8" - 14"x10" C. HOT PP
Proline® Pro150 Extended Leg 45° Elbow 1/2" - 12" C. HOT PP
Proline® Pro150 Extended Leg 90° Elbow 1/2" - 12" C. HOT PP
Proline® Pro150 Extended Leg Concentric Reducer 3/4" x 1/2"-9" x 6" C. HOT PP
Proline® Pro150 Extended Leg Eccentric Reducer 3/4" x 1/2"-8" x 6" C. HOT PP
Proline® Pro150 Extended Leg End Cap 1/2" - 12" C. HOT PP
Proline® Pro150 Extended Leg Tee 1/2" - 12" C. HOT PP
Proline® Pro150 Female Adapter 1/2" - 2" C. HOT PP
Proline® Pro150 Instrumentation Fitting 1/2" - 4" C. HOT PP
Proline® Pro150 Lateral 1 1/2" - 16" C. HOT PP
Proline® Pro150 Lateral with 1/8 Bend 1 1/2" - 16" C. HOT PP
Proline® Pro150 Machined Flush Reducer 2" x 1/2"-16" x 14" C. HOT PP
Proline® Pro150 Male Adapter 1/2" - 2" C. HOT PP
Proline® Pro150 P-Trap 1 1/2" - 8" C. HOT PP
Proline® Pro150 Proline x IPS Adapter 1 1/2" - 6" C. HOT PP
Proline® Pro150 Reducing Lateral 3" x 2" - 12" x 8" C. HOT PP
Proline® Pro150 Reducing Lateral with 1/8 Bend 3" x 2" - 12" x 8" C. HOT PP
Proline® Pro150 Reducing Sanitary Tee 3" x 2" - 12" x 8" C. HOT PP
Proline® Pro150 Reducing Tee 3" x 1" - 10" x 6" C. HOT PP
Proline® Pro150 Restraint Fitting 1/2" - 4" C. HOT PP
Proline® Pro150 Sanitary Adapter 1/2" - 2 1/2" C. HOT PP
Proline® Pro150 Sanitary Tee 2" - 12" C. HOT PP
Proline® Pro150 Segmented 45° Elbow 4" - 16" C. HOT PP
Proline® Pro150 Socket 45° Elbow 1/2" - 4" C. HOT PP
Proline® Pro150 Socket 90° Elbow 1/2" - 4" C. HOT PP
Proline® Pro150 Socket Cap 1/2" - 4" C. HOT PP
Proline® Pro150 Socket Concentric Reducer 3/4" x 1/2"-4" x 3" C. HOT PP
Proline® Pro150 Socket Coupling 1/2" - 4" C. HOT PP
Proline® Pro150 Socket Female Adapter 1/2" - 2" C. HOT PP
Proline® Pro150 Socket Male Adapter 1/2" - 20" C. HOT PP
Proline® Pro150 Socket Reducing Tee 3/4"x1/2"-1½"x3/4" C. HOT PP
Proline® Pro150 Socket Stub End 1/2" - 4" C. HOT PP
Proline® Pro150 Socket Tee 1/2" - 4" C. HOT PP
Proline® Pro150 Spigot x Socket Reducer 3/4" x 1/2"-4" x 3" C. HOT PP
Proline® Pro150 Stepped Concentric Reducer 2" x 3/8"-24" x 18" C. HOT PP
Proline® Pro150 Stub End 1/2" - 20" C. HOT PP
Proline® Pro150 Tee 1/2" - 20" C. HOT PP

Pipe [G]
Agru PP-H[1] >= 1/2" C. HOT PP
Agru PP-R[1] 1/2" - 20" C. HOT PP
Chem Proline® Pipe[2] [3] 20 mm - 2250 mm CLD 23 PE
Chem Prolok® Pipe[2] [3] 20 mm - 2250 mm CLD 23 PE
PP-Pure[1] 1/2" - 20" C. HOT PP
Proline®[1] >= 1/2" C. HOT PP
Proline® Pro150[1] 1/2" - 20" C. HOT PP
Proline® Pro45[1] >= 1/2" C. HOT PP
Proline® Pro90[1] >= 1/2" C. HOT PP
Provent™[1] >= 1/2" C. HOT PP

[1] Certified for standard dimensions ratios of 7 and 11, the sizes shown represent the pipe
    outer diameter.
[2] The sizes shown represent the pipe outer diameter.
[3] 20-315 mm pipe is Certified for standard dimension ratios of 7 and 11.  400-2250 mm pipe
    is Certified for standard dimension ratios of 11, 17, 33, and 41.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 2 Bad Hall, Austria

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
45° Elbow 581108005 20 mm CLD 23 PE
45° Elbow 581108007 25 mm CLD 23 PE
45° Elbow 581108010 32 mm CLD 23 PE
45° Elbow 581108015 50 mm CLD 23 PE
45° Elbow 581108020 63 mm CLD 23 PE
45° Elbow 581108030 90 mm CLD 23 PE
45° Elbow 581108040 110 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105020 20 mm CLD 23 PE
90° Elbow 581105030 20 mm CLD 23 PE
90° Elbow 581105040 20 mm CLD 23 PE
Chem Proline® 20 mm - 110 mm CLD 23 PE
Chem Prolok® 20 mm - 110 mm CLD 23 PE
Concentric Reducer 581129101 25 mm x 20 mm CLD 23 PE
Concentric Reducer 581129130 32 mm x 20 mm CLD 23 PE
Concentric Reducer 581129131 32 mm x 25 mm CLD 23 PE
Concentric Reducer 581129211 50 mm x 32 mm CLD 23 PE
Concentric Reducer 581129249 63 mm x 32 mm CLD 23 PE
Concentric Reducer 581129251 90 mm x 63 mm CLD 23 PE
Concentric Reducer 581129422 110 mm x 90 mm CLD 23 PE
Coupling 581116005 20 mm CLD 23 PE
Coupling 581116007 25 mm CLD 23 PE
Coupling 581116010 32 mm CLD 23 PE
Coupling 581116015 50 mm CLD 23 PE
Coupling 581116020 63 mm CLD 23 PE
Coupling 581116030 90 mm CLD 23 PE
Coupling 581116040 110 mm CLD 23 PE
Electrofusion Coupling 581117005 20 mm CLD 23 PE
Electrofusion Coupling 581117007 25 mm CLD 23 PE
Electrofusion Coupling 581117010 32 mm CLD 23 PE
Electrofusion Coupling 581117015 50 mm CLD 23 PE
Electrofusion Coupling 581117020 63 mm CLD 23 PE
Electrofusion Coupling 581117030 90 mm CLD 23 PE
Electrofusion Coupling 581117040 110 mm CLD 23 PE
End Cap 581112005 20 mm CLD 23 PE
End Cap 581112007 25 mm CLD 23 PE
End Cap 581112010 32 mm CLD 23 PE
End Cap 581112015 50 mm CLD 23 PE
End Cap 581112020 63 mm CLD 23 PE
End Cap 581112030 90 mm CLD 23 PE
End Cap 581112040 110 mm CLD 23 PE
Proline® Pro45 90° Elbow 4" - 20" C. HOT PP
Proline® Pro45 Extended Leg 90° Elbow 4" - 8" C. HOT PP
Proline® Pro45 Extended Leg Tee 4" - 16" C. HOT PP
Proline® Pro45 Laterals 4" - 16" C. HOT PP
Proline® Pro45 Laterals with 1/8 Bend 1 1/2" - 16" C. HOT PP
Proline® Pro45 Machined Concentric Reducer 6" x 4" - 12" x 10" C. HOT PP
Proline® Pro45 Machined Flush Reducer 4" x 2" - 16" x 14" C. HOT PP
Proline® Pro45 Machined Instrumentation Fitting 4" - 6" C. HOT PP
Proline® Pro45 P-TRAP 4" - 12" C. HOT PP
Proline® Pro45 Proline x IPS Adapers 4" - 6" C. HOT PP
Proline® Pro45 Reducing Laterals 6" x 4" - 12" x 8" C. HOT PP
Proline® Pro45 Reducing Laterals with 1/8 Bend 6" x 4" - 12" x 8" C. HOT PP
Proline® Pro45 Reducing Sanitary Tee 6" x 4" - 12" x 8" C. HOT PP
Proline® Pro45 Sanitary Tee 4" - 16" C. HOT PP
Proline® Pro45 Segmented 45° Elbow 4" - 16" C. HOT PP
Proline® Pro45 Short Eccentric Reducer 10" x 6" - 14" x 10" C. HOT PP
Proline® Pro45 Stepped Concentric Reducer 4" x 2" - 24" x 18" C. HOT PP
Proline® Pro45 Stub End 4" - 20" C. HOT PP
Proline® Pro45 Tee 4" - 20" C. HOT PP
Provent™ 30° Elbows 4" - 20" C. HOT PP
Provent™ 45° Elbows 4" - 54" C. HOT PP
Provent™ 60° Elbows 4" - 54" C. HOT PP
Provent™ 90° Elbows 4" - 54" C. HOT PP
Provent™ Blind Flanges 4" - 54" C. HOT PP
Provent™ Concentric Reducers 4" x 3" - 54" x 48" C. HOT PP
Provent™ Couplings 4" - 54" C. HOT PP
Provent™ Laterals 4" - 54" C. HOT PP
Provent™ Reducing Laterals 6" x 4" - 20" x 16" C. HOT PP
Provent™ Reducing Tees 6" x 4" - 20" x 16" C. HOT PP
Provent™ Slip Caps 4" - 54" C. HOT PP
Provent™ Slip Flanges 4" - 54" C. HOT PP
Provent™ Tees 4" - 54" C. HOT PP
Stub End (ANSI) 581132005 20 mm CLD 23 PE
Stub End (ANSI) 581132007 25 mm CLD 23 PE
Stub End (ANSI) 581132010 32 mm CLD 23 PE
Stub End (ANSI) 581132015 50 mm CLD 23 PE
Stub End (ANSI) 581132020 63 mm CLD 23 PE
Stub End (ANSI) 581132030 90 mm CLD 23 PE
Stub End (ANSI) 581132040 110 mm CLD 23 PE
Stub End (DIN) 581133005 20 mm CLD 23 PE
Stub End (DIN) 581133007 25 mm CLD 23 PE
Stub End (DIN) 581133010 32 mm CLD 23 PE
Stub End (DIN) 581133012 40 mm CLD 23 PE
Stub End (DIN) 581133015 50 mm CLD 23 PE
Stub End (DIN) 581133020 63 mm CLD 23 PE
Stub End (DIN) 581133025 75 mm CLD 23 PE
Stub End (DIN) 581133030 90 mm CLD 23 PE
Stub End (DIN) 581133040 110 mm CLD 23 PE
Tees 581120005 20 mm CLD 23 PE
Tees 581120007 25 mm CLD 23 PE
Tees 581120010 32 mm CLD 23 PE
Tees 581120015 50 mm CLD 23 PE
Tees 581120020 63 mm CLD 23 PE
Tees 581120030 90 mm CLD 23 PE
Tees 581120040 110 mm CLD 23 PE

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 207
Processing time was 0 seconds