NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, November 23, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0110624&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.


 
Asahi / America, Inc. 
35 Green Street
Malden, MA 02148 
United States 
800-343-3618 
781-321-5409
Visit this company's website

Facility : # 1 Bad Hall, Austria

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Pipe [G]
Agru PP-H[1] >= 1/2" C. HOT PP
Agru PP-R[1] 1/2" - 20" C. HOT PP
Chem Proline® Pipe[2] [3] 20 mm - 2250 mm CLD 23 PE
Chem Prolok® Pipe[2] [3] 20 mm - 2250 mm CLD 23 PE
PP-Pure[1] 1/2" - 20" C. HOT PP
Proline®[1] >= 1/2" C. HOT PP
Proline® Pro150[1] 1/2" - 20" C. HOT PP
Proline® Pro45[1] >= 1/2" C. HOT PP
Proline® Pro90[1] >= 1/2" C. HOT PP
Provent™[1] >= 1/2" C. HOT PP

[1] Certified for standard dimensions ratios of 7 and 11, the sizes shown represent the pipe
    outer diameter.
[2] The sizes shown represent the pipe outer diameter.
[3] 20-315 mm pipe is Certified for standard dimension ratios of 7 and 11.  400-2250 mm pipe
    is Certified for standard dimension ratios of 11, 17, 33, and 41.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 2 Bad Hall, Austria

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
45° Elbow 581108005 20 mm CLD 23 PE
45° Elbow 581108007 25 mm CLD 23 PE
45° Elbow 581108010 32 mm CLD 23 PE
45° Elbow 581108015 50 mm CLD 23 PE
45° Elbow 581108020 63 mm CLD 23 PE
45° Elbow 581108030 90 mm CLD 23 PE
45° Elbow 581108040 110 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105005 20 mm CLD 23 PE
90° Elbow 581105020 20 mm CLD 23 PE
90° Elbow 581105030 20 mm CLD 23 PE
90° Elbow 581105040 20 mm CLD 23 PE
Chem Proline® 20 mm - 110 mm CLD 23 PE
Chem Prolok® 20 mm - 110 mm CLD 23 PE
Concentric Reducer 581129101 25 mm x 20 mm CLD 23 PE
Concentric Reducer 581129130 32 mm x 20 mm CLD 23 PE
Concentric Reducer 581129131 32 mm x 25 mm CLD 23 PE
Concentric Reducer 581129211 50 mm x 32 mm CLD 23 PE
Concentric Reducer 581129249 63 mm x 32 mm CLD 23 PE
Concentric Reducer 581129251 90 mm x 63 mm CLD 23 PE
Concentric Reducer 581129422 110 mm x 90 mm CLD 23 PE
Coupling 581116005 20 mm CLD 23 PE
Coupling 581116007 25 mm CLD 23 PE
Coupling 581116010 32 mm CLD 23 PE
Coupling 581116015 50 mm CLD 23 PE
Coupling 581116020 63 mm CLD 23 PE
Coupling 581116030 90 mm CLD 23 PE
Coupling 581116040 110 mm CLD 23 PE
Electrofusion Coupling 581117005 20 mm CLD 23 PE
Electrofusion Coupling 581117007 25 mm CLD 23 PE
Electrofusion Coupling 581117010 32 mm CLD 23 PE
Electrofusion Coupling 581117015 50 mm CLD 23 PE
Electrofusion Coupling 581117020 63 mm CLD 23 PE
Electrofusion Coupling 581117030 90 mm CLD 23 PE
Electrofusion Coupling 581117040 110 mm CLD 23 PE
End Cap 581112005 20 mm CLD 23 PE
End Cap 581112007 25 mm CLD 23 PE
End Cap 581112010 32 mm CLD 23 PE
End Cap 581112015 50 mm CLD 23 PE
End Cap 581112020 63 mm CLD 23 PE
End Cap 581112030 90 mm CLD 23 PE
End Cap 581112040 110 mm CLD 23 PE
Proline® Pro45 90° Elbow 4" - 20" C. HOT PP
Proline® Pro45 Extended Leg 90° Elbow 4" - 8" C. HOT PP
Proline® Pro45 Extended Leg Tee 4" - 16" C. HOT PP
Proline® Pro45 Laterals 4" - 16" C. HOT PP
Proline® Pro45 Laterals with 1/8 Bend 1 1/2" - 16" C. HOT PP
Proline® Pro45 Machined Concentric Reducer 6" x 4" - 12" x 10" C. HOT PP
Proline® Pro45 Machined Flush Reducer 4" x 2" - 16" x 14" C. HOT PP
Proline® Pro45 Machined Instrumentation Fitting 4" - 6" C. HOT PP
Proline® Pro45 P-TRAP 4" - 12" C. HOT PP
Proline® Pro45 Proline x IPS Adapers 4" - 6" C. HOT PP
Proline® Pro45 Reducing Laterals 6" x 4" - 12" x 8" C. HOT PP
Proline® Pro45 Reducing Laterals with 1/8 Bend 6" x 4" - 12" x 8" C. HOT PP
Proline® Pro45 Reducing Sanitary Tee 6" x 4" - 12" x 8" C. HOT PP
Proline® Pro45 Sanitary Tee 4" - 16" C. HOT PP
Proline® Pro45 Segmented 45° Elbow 4" - 16" C. HOT PP
Proline® Pro45 Short Eccentric Reducer 10" x 6" - 14" x 10" C. HOT PP
Proline® Pro45 Stepped Concentric Reducer 4" x 2" - 24" x 18" C. HOT PP
Proline® Pro45 Stub End 4" - 20" C. HOT PP
Proline® Pro45 Tee 4" - 20" C. HOT PP
Provent™ 30° Elbows 4" - 20" C. HOT PP
Provent™ 45° Elbows 4" - 54" C. HOT PP
Provent™ 60° Elbows 4" - 54" C. HOT PP
Provent™ 90° Elbows 4" - 54" C. HOT PP
Provent™ Blind Flanges 4" - 54" C. HOT PP
Provent™ Concentric Reducers 4" x 3" - 54" x 48" C. HOT PP
Provent™ Couplings 4" - 54" C. HOT PP
Provent™ Laterals 4" - 54" C. HOT PP
Provent™ Reducing Laterals 6" x 4" - 20" x 16" C. HOT PP
Provent™ Reducing Tees 6" x 4" - 20" x 16" C. HOT PP
Provent™ Slip Caps 4" - 54" C. HOT PP
Provent™ Slip Flanges 4" - 54" C. HOT PP
Provent™ Tees 4" - 54" C. HOT PP
Stub End (ANSI) 581132005 20 mm CLD 23 PE
Stub End (ANSI) 581132007 25 mm CLD 23 PE
Stub End (ANSI) 581132010 32 mm CLD 23 PE
Stub End (ANSI) 581132015 50 mm CLD 23 PE
Stub End (ANSI) 581132020 63 mm CLD 23 PE
Stub End (ANSI) 581132030 90 mm CLD 23 PE
Stub End (ANSI) 581132040 110 mm CLD 23 PE
Stub End (DIN) 581133005 20 mm CLD 23 PE
Stub End (DIN) 581133007 25 mm CLD 23 PE
Stub End (DIN) 581133010 32 mm CLD 23 PE
Stub End (DIN) 581133012 40 mm CLD 23 PE
Stub End (DIN) 581133015 50 mm CLD 23 PE
Stub End (DIN) 581133020 63 mm CLD 23 PE
Stub End (DIN) 581133025 75 mm CLD 23 PE
Stub End (DIN) 581133030 90 mm CLD 23 PE
Stub End (DIN) 581133040 110 mm CLD 23 PE
Tees 581120005 20 mm CLD 23 PE
Tees 581120007 25 mm CLD 23 PE
Tees 581120010 32 mm CLD 23 PE
Tees 581120015 50 mm CLD 23 PE
Tees 581120020 63 mm CLD 23 PE
Tees 581120030 90 mm CLD 23 PE
Tees 581120040 110 mm CLD 23 PE

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 109
Processing time was 0 seconds