NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0130259&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Kamstrup A/S |  |
| Industrivej 28 | |
| DK-8660 Skanderborg | |
| Denmark | |
| 45 89 93 10 00 | |
| Visit this company's website |
Facility : Cumming, GA
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Water Meters[1] |
||||
| KWM 2220[3] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| KWM 2221[3] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| KWM 3220[2] [G] | 3/4" - 4" | D. HOT | MLTPL | |
| KWM 3221[2] [G] | 3/4" - 4" | D. HOT | MLTPL | |
| MULTICAL® 21[4] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 2100[5] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 2101[5] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 2102[5] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 2103[5] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 2250[6] | 3/4" - 4" | D. HOT | MLTPL | |
| flowIQ® 2250[5] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 3101[6] [G] | 3/4" - 4" | D. HOT | MLTPL | |
| flowIQ® 3250[6] [G] | 3/4" - 4" | D. HOT | MLTPL | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[2] Available dimensions (thread diameter x lay length):
1"x 7 1/2" (threaded)
1" x 9" (threaded)
1 1/4" x 10 3/4" (threaded)
1 1/2" x 13" (flanged)
2" x 15 1/4" (flanged)
2" x 17" (flanged)
3" x 12" (flanged)
4" x 14" (flanged)
[3] The actual model sizes are:
5/8" x 7 1/2" - 3/4" connection size
5/8" x 3/4" x 5,1" - 1" connection size
5/8" x 3/4" x 7 1/2" - 1" connection size
3/4" x 7 1/2" - 1" connection size
Available dimensions (thread diameter x lay length):
3/4" x 7 1/2" - 3/4" connection size
1" x 5.1" - 1" connection size
1" x 7 1/2" - 1" connection size
Certification does not include the brass coupling or check valve.
[4] Available dimensions (thread diameter x lay length):
3/4" x 110 mm
1" x 105 mm
1" x 130 mm
1" x 190 mm
The brass coupling and non return valves are not included in this Certification.
[5] Available dimensions (thread diameter x lay length):
3/4" x 7 1/2"
1" x 7 1/2"
The brass coupling and non return valves are not included in this Certification.
[6] Available dimensions (thread diameter x lay length):
1" x 7 1/2" (threaded version only)
1" x 9" (threaded version only)
1 1/4" x 10 3/4" (threaded version only)
1 1/2" x 12 5/8" (threaded version only)
1 1/2" x 13" (flanged or threaded version)
2" x 15 1/4" (flanged or threaded version)
2" x 17" (flanged version)
3" x 12" (flanged version)
4" x 14" (flanged version)
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Facility : Skanderborg, Denmark
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Water Meters[1] |
||||
| KWM 2220[4] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| KWM 2221[6] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| KWM 3221[6] [G] | 3/4" - 4" | D. HOT | MLTPL | |
| KWM 4220 / KWM4230[5] [G] | 5" - 12" | CLD 23 | MLTPL | |
| KWM3220[6] [G] | 3/4" - 4" | D. HOT | MLTPL | |
| MULTICAL® 21[7] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 2100[2] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 2101[2] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 2102[2] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 2103[2] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 2250[3] | 3/4" - 4" | D. HOT | MLTPL | |
| flowIQ® 2250[2] | 5/8" - 1" | D. HOT | MLTPL | |
| flowIQ® 3101[3] [G] | 3/4" - 4" | D. HOT | MLTPL | |
| flowIQ® 3250[3] [G] | 3/4" - 4" | D. HOT | MLTPL | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[2] Available dimensions (thread diameter x lay length):
3/4" x 7 1/2"
1" x 7 1/2"
The brass coupling and non return valves are not included in this Certification.
[3] Available dimensions (thread diameter x lay length):
1" x 7 1/2" (threaded version only)
1" x 9" (threaded version only)
1 1/4" x 10 3/4" (threaded version only)
1 1/2" x 12 5/8" (threaded version only)
1 1/2" x 13" (flanged or threaded version)
2" x 15 1/4" (flanged or threaded version)
2" x 17" (flanged version)
3" x 12" (flanged version)
4" x 14" (flanged version)
[4] The actual model sizes are:
5/8" x 7 1/2": 3/4" connection size
5/8" x 3/4" x 5,1”: 1" connection size
5/8" x 3/4" x 7 1/2": 1" connection size
3/4" x 7 1/2": 1" connection size
Available dimensions (thread diameter x lay length):
3/4" x 7 1/2": 3/4" connection size
1" x 5.1”- :1" connection size
1” x 7 1/2": 1" connection size
Certification does not include the brass coupling or check valve.
[5] Available dimensions (flange connection x lay length):
5" (DN125) x 10" (250mm)
6" (DN150) x 12" (300mm)
8" (DN200) x 14" (350mm)
10" (DN250) x 18" (450mm)
12" (DN300) x 20" (500mm)
[6] Available dimensions (thread diameter x lay length):
1"x 7 1/2" (threaded)
1" x 9" (threaded)
1 1/4" x 10 3/4" (threaded)
1 1/2" x 13" (flanged)
2" x 15 1/4" (flanged)
2" x 17" (flanged)
3" x 12" (flanged)
4" x 14" (flanged)
[7] Available dimensions (thread diameter x lay length):
3/4" x 110 mm
1" x 105 mm
1" x 130 mm
1" x 190 mm
The brass coupling and non return valves are not included in this Certification.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 27
Processing time was 0 seconds
