NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0145609&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Teadit N.A. Inc. | |
P.O. Box 7118 | |
Pasadena, TX 77508 | |
United States | |
800-999-0198 | |
281-476-3900 | |
Visit this company's website |
Facility : Pasadena, TX
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
1082 SAN | [1] | CLD 23 | NBR | |
1161 SAN | [1] | CLD 23 | NBR | |
24SH | [1] | C. HOT | PTFE | |
30SH | [1] | C. HOT | PTFE | |
AB-576[2] [G] | [1] | C. HOT | EPDM | |
TF 1572 SAN | [1] | C. HOT | PTFE | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.2 square inches/L. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||
O-Rings |
||||
1082 SAN | [1] | CLD 23 | NBR | |
24SH | [1] | C. HOT | PTFE | |
30SH | [1] | C. HOT | PTFE | |
AB-576[2] [G] | [1] | C. HOT | EPDM | |
TF 1572 SAN | [1] | C. HOT | PTFE | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. [2] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 0.2 square inches/L. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Packing [G] |
||||
2261 SAN | [1] | C. HOT | PTFE | |
[1] Certified for use as a packing material in valves and pumps with a maximum surface area to volume ratio of 2.3 sq. in./L. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Facility : Kirchbichl, Austria
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
24B | [1] | C. HOT | PTFE | |
24BB | [1] | C. HOT | PTFE | |
24SH | [1] | C. HOT | PTFE | |
25BI | [1] | C. HOT | PTFE | |
30SH | [1] | C. HOT | PTFE | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. |
||||
O-Rings |
||||
24SH | [1] | C. HOT | PTFE | |
30SH | [1] | C. HOT | PTFE | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. |
Facility : Sao Paulo, Brazil
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
1082 SAN | [1] | CLD 23 | NBR | |
1161 SAN | [1] | CLD 23 | NBR | |
TF 1572 SAN | [1] | C. HOT | PTFE | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. |
||||
O-Rings |
||||
TF 1572 SAN | [1] | C. HOT | PTFE | |
[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L. |
Mechanical Devices
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Packing [G] |
||||
2261 SAN | [1] | C. HOT | PTFE | |
[1] Certified for use as a packing material in valves and pumps with a maximum surface area to volume ratio of 2.3 sq. in./L. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Number of matching Manufacturers is 1
Number of matching Products is 24
Processing time was 0 seconds