NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0174243&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Trelleborg Sealing Solutions Americas, Inc. | |
2509 Bremer Road | |
Fort Wayne, IN 46803 | |
United States | |
260-749-9631 | |
Visit this company's website |
Facility : Fort Wayne, IN
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
E75F2[1] | [2] | C. HOT | EPDM | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 3.0 sq. in. /L. [2] Certified for a maximum surface area to volume ratio of 3.0 sq. in. /L. |
||||
O-Rings |
||||
E75F2[1] | [2] | C. HOT | EPDM | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 3.0 sq. in. /L. [2] Certified for a maximum surface area to volume ratio of 3.0 sq. in. /L. |
Facility : Guangdong, China
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
E7W14 | [1] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 10 square inches per liter. |
||||
O-Rings |
||||
E7W14 | [1] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 10 square inches per liter. |
Mechanical Plumbing Devices
Trade Designation | ||||
Gasket/Sealing Materials[1] |
||||
E7W14[2] | ||||
[2] Certified for a maximum surface area to volume ratio of 10 square inches per liter. |
||||
[1] This product does not require a Q statistic. It is made from material or materials that do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3 |
||||
O-Rings[1] |
||||
E7W14 [2] | ||||
[2] Certified for a maximum surface area to volume ratio of 10 square inches per liter. |
||||
[1] This product does not require a Q statistic. It is made from material or materials that do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3 |
Facility : Tatu, Taichung, Taiwan
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
E7W14 | [1] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 10 square inches per liter. |
||||
O-Rings |
||||
E7W14 | [1] | C. HOT | EPDM | |
[1] Certified for a maximum surface area to volume ratio of 10 square inches per liter. |
Mechanical Plumbing Devices
Trade Designation | ||||
Gasket/Sealing Materials[1] [2] |
||||
E7W14 | ||||
[1] Certified for a maximum surface area to volume ratio of 10 square inches per liter. [2] This product does not require a Q statistic. it is made from material or materials that do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3 |
||||
O-Rings[1] [2] |
||||
E7W14 | ||||
[1] Certified for a maximum surface area to volume ratio of 10 square inches per liter. [2] This product does not require a Q statistic. it is made from material or materials that do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3 |
Facility : Bien Hoa City, Dong Nai, Vietnam
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Gasket/Sealing Materials |
||||
E7W14[1] | [2] | C. HOT | EPDM | |
ECW01 [3] | [4] | C. HOT | EPDM | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.5 square inches/L. [2] Certified for a maximum surface area to volume ratio of 10 square inches per liter. [3] This product is to also be evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 3 square inches/L. [4] Certified for a maximum surface area to volume ratio of 3 square inches per liter. |
||||
O-Rings |
||||
E7W14[1] | [2] | C. HOT | EPDM | |
ECW01 [3] | [4] | C. HOT | EPDM | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 2.5 square inches/L. [2] Certified for a maximum surface area to volume ratio of 10 square inches per liter. [3] This product is to also be evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 3 square inches/L. [4] Certified for a maximum surface area to volume ratio of 3 square inches per liter. |
Number of matching Manufacturers is 1
Number of matching Products is 14
Processing time was 0 seconds