NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0179841&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Beijing Scinor Membrane Technology Co., Ltd. 
F8, Xueyuan International Tower
1 Zhichun Road, Haidian District 
Beijing 100083 
China 
86 106 975 6503
Visit this company's website


Facility : # 1 China

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Ultrafiltration Devices[1] [2]
SMT600-P23[3] 119 mm x 1157 mm CLD 23 MLTPL
SMT600-P38[3] 119 mm x 1800 mm CLD 23 MLTPL
SMT600-P40[3] 160 mm x 1813 mm CLD 23 MLTPL
SMT600-P50[3] 160 mm x 2321 mm CLD 23 MLTPL
SMT600-P51[3] 225 mm x 1860 mm CLD 23 MLTPL
SMT600-P52[3] 225 mm x 1708 mm CLD 23 MLTPL
SMT600-P53[3] 250 mm x 1527 mm CLD 23 MLTPL
SMT600-P55[3] 225 mm x 1887 mm CLD 23 MLTPL
SMT600-P56[3] 180 mm x 1920 mm CLD 23 MLTPL
SMT600-P57[3] 250 mm x 1360 mm CLD 23 MLTPL
SMT600-P60[3] 200 mm x 1881 mm CLD 23 MLTPL
SMT600-P72[3] 200 mm x 2160 mm CLD 23 MLTPL
SMT600-P80[3] 225 mm x 2360 mm CLD 23 MLTPL
SMT600-P81[3] 250 mm x 2117 mm CLD 23 MLTPL
SMT600-S26[4] 130 mm x 1192 mm CLD 23 MLTPL
SMT600-S28[4] 130 mm x 1192 mm CLD 23 MLTPL
SMT600-S35[4] 170 mm x 1600 mm CLD 23 MLTPL
SMT600-S40[4] 180 mm x 1337 mm CLD 23 MLTPL
SMT600-S48[4] 180 mm x 1337 mm CLD 23 MLTPL
SMT600-S50[4] 170 mm x 2209 mm CLD 23 MLTPL
SMT600-S51[4] 180 mm x 1654 mm CLD 23 MLTPL
SMT600-S60[4] 180 mm x 1654 mm CLD 23 MLTPL 

[1] Size is expressed as OD x length.
[2] Certified for a minimum daily flow of 31,200 L.
[3] Membranes should be flushed with tap water for 10 minutes before being placed into
    service at the following flow rates:			
    SMT600-P23 at 38 liters per minute			
    SMT600-P38 at 63 liters per minute			
    SMT600-P40 at 67 liters per minute			
    SMT600-P50 at 85 liters per minute			
    SMT600-P51 at 85 liters per minute			
    SMT600-P52 at 85 liters per minute			
    SMT600-P55 at 90 liters per minute			
    SMT600-P56 at 93 liters per minute			
    SMT600-P57 at 93 liters per minute			
    SMT600-P60 at 99 liters per minute			
    SMT600-P72 at 120 liters per minute			
    SMT600-P80 at 134 liters per minute			
    SMT600-P81 at 133 liters per minute
[4] The following membranes should be flushed by submerging the module in a tank and
    allowing it to run with tap water for 10 minutes before being placed into service at the
    following flow rates:	
    SMT600-S26 at 43 liters per minute
    SMT600-S28 at 47 liters per minute
    SMT600-S30 at 60 liters per minute
    SMT600-S50 at 85 liters per minute
    The water in the tank should then be drained.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 22
Processing time was 0 seconds