NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0184103&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Chemco International Ltd 
13-23 Hagmill Road
East Shawhead Industrial Estate 
Coatbridge, ML5 4XD 
United Kingdom 
44 123 660 6060
Visit this company's website


Facility : Coatbridge, United Kingdom

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Tanks[1] [2] [3] [G]
Epo-Chem RA 500 >= 1000 gal. CLD 23 EPOXY
Epo-Chem RA 500 UW >= 1000 gal. CLD 23 EPOXY
Epo-Chem RA 500M >= 1000 gal. CLD 23 EPOXY 

[1] All RA500 products are used with Epo-Chem RS 500P primer.
[2] Colors: Black, grey, white
    Number of Coats: Primer 1, Top Coat 1
    Maximum Field Use Dry Film Thickness (in mils): Primer: 10; Top coat: 25; Total system:
    35
    Recoat Cure Time and Temperature: Primer cure time is 2 hours at 30°C
    Final Cure Time and Temperature: 48 hours at 30°C
    Special Comments: Primer: Mix Ratio is 4.18:0.82 (Part A:Part B) by weight Top Coat: Mix
    Ratio is 3.67:1.333 (Part A:Part B) by weight
[3] Only products bearing the NSF mark on the product, product packaging and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 3
Processing time was 0 seconds